[TX]TRANSFER - BITTREX - MULTIPOOL - ANDROID - POS,TOR,MN, STEALTH

[kevinjulio]

Thank you sir. Are you the owner of this coin ?

Both wigitgetit and I have teamed up to do some work on this coin, Nobody "owns" it. We're just a community people that choose to make it better

I added a poll to the page, so you can decide on the next hard fork block, I'm just about finished my work. And ready to release But I want to give as much time as possible to the exchanges and the community. 125k blocks would make the hard fork in around ~23 days, with an average of 1300 blocks per day

I looked forward to this coin . transfercoin may have a future as expected many people

[infernoman]

Here is the most recent analysis of the QT .exe for anyone interested. As confirmed it was a false positive and there is no longer a warning.

https://www.virustotal.com/en/file/6c8109eaabf4bfdbe237e769abac05cc35786fa5399c44bf463ccc9a6e6d492b/analysis/1446008627/

[kevinjulio]

Why transfercoin it can not be moved on bittrex address ?

[WigitGetIt]

Why transfercoin it can not be moved on bittrex address ?

What are you talking about?  Looks to be plenty of people moving coins on Bittrex.

[shadows123]

DONE:
Indonesian thread https://bitcointalk.org/index.php?topic=1222384.0

Good job mate. PM me your TX wallet address i ll send you some coins 

sorry ive been busy yesterday
TaiwqefF3fvYAniFD61wzR38iwi9N2gYPf
thanks 

[WigitGetIt]

Please help get this tweet a ton of RT's.  This is a great opportunity to spread the word on how we are growing. Thanks.   

https://twitter.com/wigitgetit/status/659317851145146368

[catotune]

When I try to run the daemon (compiled on Linux from the GitHub link in OP), I get:

Code:

************************
EXCEPTION: NSt8ios_base7failureE
CDataStream::read() : end of data
transfer in AppInit()

terminate called after throwing an instance of 'std::ios_base::failure'
  what():  CDataStream::read() : end of data

and it crashes. Has anyone experienced anything similar, or has a fix?

[infernoman]

When I try to run the daemon (compiled on Linux from the GitHub link in OP), I get:

Code:

************************
EXCEPTION: NSt8ios_base7failureE
CDataStream::read() : end of data
transfer in AppInit()

terminate called after throwing an instance of 'std::ios_base::failure'
  what():  CDataStream::read() : end of data

and it crashes. Has anyone experienced anything similar, or has a fix?

Check to make sure its created a data folder named ".transfer" if it has, then i'm going to guess the last time you can the client was using sudo or root. and trying to start the file without sudo or root, after you've already used it will result in an error.

Try using "sudo transferd"

[catotune]

When I try to run the daemon (compiled on Linux from the GitHub link in OP), I get:

Code:

************************
EXCEPTION: NSt8ios_base7failureE
CDataStream::read() : end of data
transfer in AppInit()

terminate called after throwing an instance of 'std::ios_base::failure'
  what():  CDataStream::read() : end of data

and it crashes. Has anyone experienced anything similar, or has a fix?

Check to make sure its created a data folder named ".transfer" if it has, then i'm going to guess the last time you can the client was using sudo or root. and trying to start the file without sudo or root, after you've already used it will result in an error.

Try using "sudo transferd"

Hi thanks for the tips - I actually wasn't using sudo / root, but I did have a .transfer folder with the old data files; I just needed to delete everything except wallet.dat and transfer.conf, and now it's running and synching. Thanks again!

[nrvasquez]

There are many individuals buying up TX from the weak hands.  Get ready for bright future for TX

[raetsch]

When I try to run the daemon (compiled on Linux from the GitHub link in OP), I get:

Code:

************************
EXCEPTION: NSt8ios_base7failureE
CDataStream::read() : end of data
transfer in AppInit()

terminate called after throwing an instance of 'std::ios_base::failure'
  what():  CDataStream::read() : end of data

and it crashes. Has anyone experienced anything similar, or has a fix?

Check to make sure its created a data folder named ".transfer" if it has, then i'm going to guess the last time you can the client was using sudo or root. and trying to start the file without sudo or root, after you've already used it will result in an error.

Try using "sudo transferd"

Hi thanks for the tips - I actually wasn't using sudo / root, but I did have a .transfer folder with the old data files; I just needed to delete everything except wallet.dat and transfer.conf, and now it's running and synching. Thanks again!

Had the same Problem with the qt-version. Die you get connections without adding nodes manually?

[WigitGetIt]

I do not see any transfercoin giveaway here?

Because the giveaways have been completed.  I am planning another one to coincide with the fork and wallet release.

[catotune]

Had the same Problem with the qt-version. Die you get connections without adding nodes manually?

I am using addnodes in my transfer.conf. You can try these (got most of these from WigitGetIt earlier in this thread):

Code:

addnode=104.236.89.11:7777
addnode=104.236.89.11:7778
addnode=54.187.214.128:7778
addnode=118.90.0.123
addnode=176.205.241.159
addnode=198.27.97.172
addnode=198.50.243.89
addnode=198.50.243.90
addnode=213.108.119.84
addnode=37.138.174.29
addnode=5.9.36.211
addnode=54.165.194.201
addnode=70.123.150.214
addnode=72.235.23.10
addnode=72.74.26.161
addnode=83.157.62.179
addnode=86.5.28.9
addnode=90.194.88.36
addnode=91.96.63.247
addnode=92.97.134.32
addnode=99.236.174.184
addnode=99.236.215.227

Good luck!

[HunterS]

Is there a windows wallet that works?I keep getting runtime errors now.Been on this coin frm day one with out any problems at all

[WigitGetIt]

Is there a windows wallet that works?I keep getting runtime errors now.Been on this coin frm day one with out any problems at all

Here is the windows wallet that I am running (from the op).  With the newest wallet you need to full sync, though that should not be causing run time errors.  I would just backup your wallet.dat and delete the Transfer (C:\Users\yourusername\AppData\Roaming) folder and reinstall fresh.  Since you have to re-sync anyway a complete new install is best practice, in my opinion.

https://www.dropbox.com/s/m4g2eesngdpyo1w/transfer-1.2.0.0-win32.zip?dl=0

[HunterS]

Is there a windows wallet that works?I keep getting runtime errors now.Been on this coin frm day one with out any problems at all

Here is the windows wallet that I am running (from the op).  With the newest wallet you need to full sync, though that should not be causing run time errors.  I would just backup your wallet.dat and delete the Transfer (C:\Users\yourusername\AppData\Roaming) folder and reinstall fresh.  Since you have to re-sync anyway a complete new install is best practice, in my opinion.

https://www.dropbox.com/s/m4g2eesngdpyo1w/transfer-1.2.0.0-win32.zip?dl=0

Already done all this but no good.

[WigitGetIt]

Is there a windows wallet that works?I keep getting runtime errors now.Been on this coin frm day one with out any problems at all

Here is the windows wallet that I am running (from the op).  With the newest wallet you need to full sync, though that should not be causing run time errors.  I would just backup your wallet.dat and delete the Transfer (C:\Users\yourusername\AppData\Roaming) folder and reinstall fresh.  Since you have to re-sync anyway a complete new install is best practice, in my opinion.

https://www.dropbox.com/s/m4g2eesngdpyo1w/transfer-1.2.0.0-win32.zip?dl=0

Already done all this but no good.

Can you give some details?

Windows OS Version
32 or 64 bit
anything else that may help?

[HunterS]

Is there a windows wallet that works?I keep getting runtime errors now.Been on this coin frm day one with out any problems at all

Here is the windows wallet that I am running (from the op).  With the newest wallet you need to full sync, though that should not be causing run time errors.  I would just backup your wallet.dat and delete the Transfer (C:\Users\yourusername\AppData\Roaming) folder and reinstall fresh.  Since you have to re-sync anyway a complete new install is best practice, in my opinion.

https://www.dropbox.com/s/m4g2eesngdpyo1w/transfer-1.2.0.0-win32.zip?dl=0

Already done all this but no good.

Can you give some details?

Windows OS Version
32 or 64 bit
anything else that may help?

Windows 8.1 64 bit.I have over 1000+ wallets synced which run fine.I will post what error says when i get home from work

[WigitGetIt]

Please retweet to help spread the word.  

https://twitter.com/Transfer_dev/status/659556026576859136

https://twitter.com/Transfer_dev/status/659554437183094784

https://twitter.com/Transfer_dev/status/659553321280081920

https://twitter.com/Transfer_dev/status/659551839654776832

https://twitter.com/Transfer_dev/status/659557688997642240

[infernoman]

Please retweet to help spread the word.  

https://twitter.com/Transfer_dev/status/659556026576859136

https://twitter.com/Transfer_dev/status/659554437183094784

https://twitter.com/Transfer_dev/status/659553321280081920

https://twitter.com/Transfer_dev/status/659551839654776832

https://twitter.com/Transfer_dev/status/659557688997642240

And remember guys if you make your own tweets about TX make sure to post a link here ! I'll pay 100 TX for every unique tweet, until the first of november