[TX]TRANSFER - BITTREX - MULTIPOOL - ANDROID - POS,TOR,MN, STEALTH

[incognitoworker]

After running the wallet a long time, now it wont open at all and just crashes.
Even a fresh "install" trying to load from scratch crashes before the wallet can load.
Any ideas whats this issue is about?
Win 8.1 64 bit,
its my controller wallet and worked just fine until a couple days ago.

IW

[WigitGetIt]

After running the wallet a long time, now it wont open at all and just crashes.
Even a fresh "install" trying to load from scratch crashes before the wallet can load.
Any ideas whats this issue is about?
Win 8.1 64 bit,
its my controller wallet and worked just fine until a couple days ago.

IW

What error does it give you when it crashes?

[waffles99]

I have been reading up on developments with SuperNet, and following the departure from the NXT chain (see https://bitcointalk.org/index.php?topic=762346.msg13978139#msg13978139 ), 
jl777 has drafted a proposal regarding the Atomic Cross-Chain Asset Standard-
an interoperable standards initiative that is blockchain agnostic and asset centric.

[Declaration of Independence]
'We the asset holders hereby declare our independence from any single blockchain.
An open and jointly developed specification on cross chain atomic asset transfers will be developed. Any current or future blockchain is invited to join.'

https://bitcointalk.org/index.php?topic=1372879.0

The proposed direction for the cryptocurrency ecosystem seem to be an excellent path forward regarding standards for integration/interoperability

[fxpc]

Wallet on WinXP randomly crashes, can work 24h without crashes, can crash instantly or after 2-3 hours. I need urgent update. Other software and wallets work fine. So this is TX wallet glitch.

[incognitoworker]

After running the wallet a long time, now it wont open at all and just crashes.
Even a fresh "install" trying to load from scratch crashes before the wallet can load.
Any ideas whats this issue is about?
Win 8.1 64 bit,
its my controller wallet and worked just fine until a couple days ago.

IW

What error does it give you when it crashes?

It gives no errors, just crashes on splash screen.
Cant see any info in debug either.

IW

[BTC-BTC-BTC]

After running the wallet a long time, now it wont open at all and just crashes.
Even a fresh "install" trying to load from scratch crashes before the wallet can load.
Any ideas whats this issue is about?
Win 8.1 64 bit,
its my controller wallet and worked just fine until a couple days ago.

IW

What error does it give you when it crashes?

It gives no errors, just crashes on splash screen.
Cant see any info in debug either.

IW

Hi IW,
 
I had a similar problem with another coin. Rename your current wallet.dat file let it generate a new wallet to see if the wallet will start correctly. If that works replace your wallet file with your backup. If you don't have a backup you try load a older version of the wallet to dump private key.

[incognitoworker]

After running the wallet a long time, now it wont open at all and just crashes.
Even a fresh "install" trying to load from scratch crashes before the wallet can load.
Any ideas whats this issue is about?
Win 8.1 64 bit,
its my controller wallet and worked just fine until a couple days ago.

IW

What error does it give you when it crashes?

It gives no errors, just crashes on splash screen.
Cant see any info in debug either.

IW

Hi IW,
 
I had a similar problem with another coin. Rename your current wallet.dat file let it generate a new wallet to see if the wallet will start correctly. If that works replace your wallet file with your backup. If you don't have a backup you try load a older version of the wallet to dump private key.

Thnx BTC-BTC-BTC, but the issue is not the wallet.dat file as i tried to start with a fresh install aswell.
The issue is most likely something within win, and not the client since it loads fine on other machines.

Will do some reinstalls anyway, and move to ubuntu

IW

[WigitGetIt]

Here is the interview I did with Blockchaindynamics, My part starts at 25.05 min. When my part started it is hard to hear, but it cleared up. I would like to suggest listening to the whole show, these guys are great and notsofastcrypto stayed for the whole show,

I had a great time and it looks like they want to have me back. Lets show them support by sharing the content.

Show on MixCloud: https://www.mixcloud.com/ErrorByTrial/blockchaindynamics-2-error-by-trial-radio-352016/
Show on SoundCloud: https://soundcloud.com/blockchaindynamics
Show BCT Thread: https://bitcointalk.org/index.php?topic=1379730.0
Website: http://www.blockchaindynamics.net/
Twitter: https://twitter.com/chaindynamics

Edit. Updated new show location SoundCloud.

[incognitoworker]

After running the wallet a long time, now it wont open at all and just crashes.
Even a fresh "install" trying to load from scratch crashes before the wallet can load.
Any ideas whats this issue is about?
Win 8.1 64 bit,
its my controller wallet and worked just fine until a couple days ago.

IW

What error does it give you when it crashes?

It gives no errors, just crashes on splash screen.
Cant see any info in debug either.

IW

Hi IW,
 
I had a similar problem with another coin. Rename your current wallet.dat file let it generate a new wallet to see if the wallet will start correctly. If that works replace your wallet file with your backup. If you don't have a backup you try load a older version of the wallet to dump private key.

Thnx BTC-BTC-BTC, but the issue is not the wallet.dat file as i tried to start with a fresh install aswell.
The issue is most likely something within win, and not the client since it loads fine on other machines.

Will do some reinstalls anyway, and move to ubuntu

IW

Issue was computer related.
Copied entire datafolder and moved to another rig, started instantly.
Any ideas on WHAT the issue on my rig is??

IW

[WigitGetIt]

After running the wallet a long time, now it wont open at all and just crashes.
Even a fresh "install" trying to load from scratch crashes before the wallet can load.
Any ideas whats this issue is about?
Win 8.1 64 bit,
its my controller wallet and worked just fine until a couple days ago.

IW

What error does it give you when it crashes?

It gives no errors, just crashes on splash screen.
Cant see any info in debug either.

IW

Hi IW,
 
I had a similar problem with another coin. Rename your current wallet.dat file let it generate a new wallet to see if the wallet will start correctly. If that works replace your wallet file with your backup. If you don't have a backup you try load a older version of the wallet to dump private key.

Thnx BTC-BTC-BTC, but the issue is not the wallet.dat file as i tried to start with a fresh install aswell.
The issue is most likely something within win, and not the client since it loads fine on other machines.

Will do some reinstalls anyway, and move to ubuntu

IW

Issue was computer related.
Copied entire datafolder and moved to another rig, started instantly.
Any ideas on WHAT the issue on my rig is??

IW

Maybe try like CCleaner to clean some registry entries out if its windows. When you did a fresh rebuild of did you delete the Transfer folder completely and then start the QT? I am thinking maybe a bad peers.dat file.

[incognitoworker]

After running the wallet a long time, now it wont open at all and just crashes.
Even a fresh "install" trying to load from scratch crashes before the wallet can load.
Any ideas whats this issue is about?
Win 8.1 64 bit,
its my controller wallet and worked just fine until a couple days ago.

IW

What error does it give you when it crashes?

It gives no errors, just crashes on splash screen.
Cant see any info in debug either.

IW

Hi IW,
 
I had a similar problem with another coin. Rename your current wallet.dat file let it generate a new wallet to see if the wallet will start correctly. If that works replace your wallet file with your backup. If you don't have a backup you try load a older version of the wallet to dump private key.

Thnx BTC-BTC-BTC, but the issue is not the wallet.dat file as i tried to start with a fresh install aswell.
The issue is most likely something within win, and not the client since it loads fine on other machines.

Will do some reinstalls anyway, and move to ubuntu

IW

Issue was computer related.
Copied entire datafolder and moved to another rig, started instantly.
Any ideas on WHAT the issue on my rig is??

IW

Maybe try like CCleaner to clean some registry entries out if its windows. When you did a fresh rebuild of did you delete the Transfer folder completely and then start the QT? I am thinking maybe a bad peers.dat file.

When you did a fresh rebuild of did you delete the Transfer folder completely and then start the QT?

Yes, fresh new datadir and same result.
A reboot did not help either.

IW

[Vin33T]

Hi Community members, my previous account is disabled i don't know why, tried many times to contact admin but no response so i made a new account to continue support those Altcoins in which i have invested my BTC as i am away from past 1 month & just wanted a quick update what kind of new development is under process and next development release is when ? Thank you

[WigitGetIt]

Hi Community members, my previous account is disabled i don't know why, tried many times to contact admin but no response so i made a new account to continue support those Altcoins in which i have invested my BTC as i am away from past 1 month & just wanted a quick update what kind of new development is under process and next development release is when ? Thank you

Check the below post. No dates, but SOON.

https://bitcointalk.org/index.php?topic=1203975.1420

[pokeytex]

Anyone have the solution?  I cannot start my masternodes after a power failure last night.  My wallet wouldn't start so i deleted all files except the transfer.conf, masternode.conf, and wallet.dat from the controller folder.  I then re-synced the block chain and the wallet opened again.  When I tried to open the masternodes they opened and then immediately shut down.  I deleted all files from the masternode folders except wallet.dat and transfer.conf and copied everything over from the controller wallet that just synced.  Unfortunately no masternodes will load again.  Any ideas?

[killerjoegreece]

my wallet finds one connection and loses it does not start sync. i added nodes but that didnt help

[avitas]

Anyone have the solution?  I cannot start my masternodes after a power failure last night.  My wallet wouldn't start so i deleted all files except the transfer.conf, masternode.conf, and wallet.dat from the controller folder.  I then re-synced the block chain and the wallet opened again.  When I tried to open the masternodes they opened and then immediately shut down.  I deleted all files from the masternode folders except wallet.dat and transfer.conf and copied everything over from the controller wallet that just synced.  Unfortunately no masternodes will load again.  Any ideas?

how about syncing the masternode wallet independently?  i assume the masternodes and controller are on different systems.

[avitas]

my wallet finds one connection and loses it does not start sync. i added nodes but that didnt help

i noticed i usually take a while for it to find connections, even with added node list.  give it some time and see if it can sync up ok.

I have 1 connections right now also..but it's sync'd.

[OKtoshi]

ROKOS v5 Flavors Released!

Support thread: ROKOS Flavors

Visit the New ROKOS website at: http://rokos.space

ROKOS v5 "Flavors" Released. Full OS with Cryptocurrency Clients, full nodes and much more. Faster, Easier, Stronger.

Just Burn and Click to Start your own Cryptocurrency Full Node or Client

Cryptocurrency and the Internet of Things
Flavors: Raspbian based OS with integrated Cryptocurrencies Clients, Nodes ready for use.

We've seen new services selling "stake miners" for different currencies, we support the new technology and uses for cryptocurrencies in the Raspberry Pi environments, hence we came up with a Free solution for every IoT enthusiast, developer, user, service that want to use their IoT devices with BTC, OK and more cryptocurrencies, or that would like to turn their Pi into a Staking device, It already integrates a fully functional Bitcoin + 11 Cryptocurrencies Clients and nodes as well to provide the users with the best and easier Out of the Box experience.

v5 "Flavors" Released

The First OS image release that merges the full power of Raspberry Pi 2, Banana Pi PRO & IoT Devices with Bitcoin and Cryptocurrencies:
- ROKOS v5 "Flavors" comes with integrated Cryptocurrencies Clients / nodes .

Distribution aimed for everyone, from new Pi users to Pi Developers, Ease of use Out of the Box.
Download & Burn, Ready for use.

March 07 2016

ROKOS v5 "flavors" for Raspberry Pi 2 - Download (2.2Gb)
March 07 2016
MD5 Checksum:
SHA-1 Checksum:
SHA-256 Checksum:
SHA-512 Checksum:


ROKOS History releases link.

*Official Download Links - Do Not Download from other sources, posts, links to ensure the security of your downloads*

Specs:

v5 "flavors" Release (Pi2) March 07 2016
- Full burnable OS Compatible with the Raspberry Pi systems.
- Full System / Programs Upgrade.
- Full Design Upgrade.
- Iceweasel browser.
- Autolog.
- Debian.
- Java Dev Tools.
- Easier to Use mod Update.
- Security and Optimization Update.
- Updated Out of the box Firewall ready for use (gui) (start in terminal: gufw)
- Includes Qt and complete set of Dev tools (For developers)
- Includes Qt 3.2.1 Native / Qt 5.5.1 for Cross compile !
- Works with other cryptocurrencies.
- 1024mb swap mod.
- Updated Cryptocurrencies Included:
Bitcoin, OKCash, Blackcoin, Gamecredits, Digitalcoin, Diamondcoin,
Energycoin, Europecoin, Soil, Metalcoin, Transfercoin, Mojocoin. (Readme.txt)
- Custom Login and Wallpapers.
- Cryptocurrencies nodes at /usr/local/bin/
- Easy Clients / Nodes Upgrades.
- Direct access to the Clients Via: Task bar and Menu > Internet.
- ZIP file - Compression: 2.2Gb image to download, 6.1GB uncompressed to burn.


Requirements:
ROKOS v5 "flavors":
- Raspberry Pi 2 (Pi2 full power use by debian jessie base)

- Min 8gb SD card and an External device (usb / hdd / ssd). To sync the Cryptocurrencies chains on the external device instead of the SD card.


Future Versions:
- Security updates.
- Chain Updates.
- More Cryptocurrencies will be integrated for an Out of the Box experience and adoption.
- Designs Updates.
- More wallets, programs or features, based on users/communities/developers feedback, support and/or cross collaborations.

ROKOS v5 "flavors" Screen Shots

"ROKOS" Initial Setup

1.- Download and Burn the ROKOS Image to a micro SD Card like you would with any other Pi Distro.
March 01 2016
ROKOS v5 "flavors" - DOWNLOAD

Steps for first boot

*Raspberry Pi 2:
User: pi / Password: raspberry , follow normal setup.

a) Type: sudo raspi-config
b) Set your Time Zone, change your pi user password and Expand the file system, restart.
After restart the system you can type:  "startx"   to start the user desktop.
c) System ready for use.

Welcome to the ROKOS Desktop

Final steps / BTC and OK Clients

a) Go to Menu > Internet and Click on your favorite Cryptocurrency Wallet

This will open the Cryptocurrency wallet and start sync.

*For some Cryptocurrencies the initial sync might take some days, wallets are fully usable after being fully Synchronized.

b) Always remember to make constant backups of your wallets and save them in USB or external media.

Use your wallets in ROKOS to plug HW and mine, Send/Receive, Stake, Share,
become a full node and support your favorite Cryptocurrency network, develop new applications,
etc, the limit is only in your imagination.


Important Security Notice:
*) Remember to create a backup for your Wallets, you can use the wallets to create them and save in different folders on a USB device.
You should ALWAYS have a backup of your wallet, Raspberry Pi Hardware, Raspbian and ROKOS Software are under development hence not responsible for missuses, electrical or compatibility issues that might cause a loss of information. It is as secure as one's ability to take care for it, same as a computer, so always have a backup of your wallets on an external device.

*) Some people tend to recommend getting a 128Gb MicroSD HC (High speed) , at the same time it does work, I do not recommend this solution, as microSD cards tend to get corrupted by the number of overwrites, to ensure the best functionality and security you should use an external HDD/USB storage device to store the chains.

You can start testing and developing new integration with ROKOS and your favorite cryptocurrencies for your IoT projects.

***********************

ROKOS is Released for Free to support Bitcoin OK and the crypto environment adoption
If you find this work valuable or if it helped your project and You would like to support feel free to share your donations at

BTC  15VrDkat5vD4FfycRk3E4e7EgqftzK6tm8
OK  PWZg5F7NurKDNGdckRpQgmShEQhEHmF5W5
GMC  GcVNPqcDdqZLbEh65eyo4ADPEKBsU4tyLi
BLK  B8kBAXZbkXDKJ9Zu7dcarUCp8SfnyoKWVe
DMD  dLSokViLNuMD1q6kssWMtv9vvgau4Yo5GV
DGC  DQfpBXe11e7YnWmyNpeg6wkESiWN1ENEPp
ENRG  e7t3em8YTwFRXeSQtXumhDBqQzzphoiQnu
ERC  EKz7czViBqwSu8Ne2omxaznMnkAY4FqkJB
METAL  MNgjwErYStsEfyKiSoUfyoX877kZcSpmZG
MOJO  MSztn2BwFjhgm9e5nEBwDzAr1r4UcxYLRY
TX  Tk38sE6rLz63JtbErecGgqJxdB5RKMdnbz
SOIL  0x3df2e34602fd5711b2f32daebeff96df0a4df113

Contact: OKtoshi at devteam@okcash.co

***********************

"Empower yourself and build your own Bitcoin and Cryptocurrencies Fullnode Guide"

ROKOS Guide from zero! Full steps for New Users
by SwedishBitMiner

---Prepare the MicroSD/MicroSDHC card---

(I did this on a Windows computer, and I dont know what tool to use for Mac to install the iso file Image burner, for this guide you will have to figure out that yourself, if you use Mac)

1. Download and install SD Formatter 4.0 (This is the tool to format the SD card) from:
Windows: https://www.sdcard.org/downloads/formatter_4/eula_windows/SDFormatterv4.zip
Mac: https://www.sdcard.org/downloads/formatter_4/eula_mac/SDFormatter_4.00B.pkg
(or find it yourself at: https://sdcard.org/downloads)

2. Insert the MicroSD/MicroSDHC card into your PC/Mac. (You will probably need an MicroSD to SD adapter for this).

3. Start SD Formatter 4.0 and click the [Option] button. In there you change from "FORMAT TYPE: QUICK" to "FORMAT TYPE: (FULL)Erase", just leave the "FORMAT SIZE ADJUSTMENT" in OFF and click the [OK] button so start the format. When the card is completely formatted click the [Exit] button to close SD Formatter.

4. Download and install Win32 Disk Imager (This is the iso file Image burner) from:
Windows: http://sourceforge.net/projects/win32diskimager/files/latest/download

5. Download ROKOS Core (rokos5.img.zip) and unzip the ISO file (This is the awesome ROKOS Core "Operating System" that we are going to install on the SD card) from:
Download: http://bit.ly/rokos5flavors
(or find it yourself at: http://rokos.space

6. Start Win32 Disk Imager, press the "little blue folder" and select the "rokos5.img" file that you did extract. Make sure your SD card is selected in the list to the right and press the [Write] button. It will tell you that it can corrupt the SD card, just press [Yes] to continue the installation, when the installation to the SD card is done press the [Exit] button to close Win32 Disk Imager.

7. Now "Safely remove" your SD card from the computer.

8. Put the MicroSD/MicroSDHC card in your Raspberry Pi 2, and make sure you got an USB Keyboard, Monitor (via HDMI), and and Internet cable connected to the Raspberry Pi 2 before you connect the power cable to your Raspberry Pi 2.

---Installing ROKOS ---
(The first boot of ROKOS )

1. Type:

Code:

sudo raspi-config

(and press enter)

2. Select:

Code:

1. Expand Filesystem

(and press enter) press enter again on the <Ok> button.

3. Select:

Code:

2. Change user password

(and press enter) press enter again on the <Ok> button. Type a new password (you will not see the letters) and press enter, type your new password again, and press enter. Then press the <Ok> button.

4. Select:

Code:

5. Internationalization Options

(and press enter) Then select:

Code:

I2. Change Timezone

(Choose your timezone)

5. Press the "TAB" button on your keyboard two times to get to the <Finish> button, and press enter. Then choose <Yes> to restart your system.

6. Type:

Code:

startx

(and press enter) your system will now start up and you are DONE!

ENJOY THIS AWESOME OPERATING SYSTEM!

[thoth-Atlantian]

ROKOS v5 Flavors Released!

Support thread: ROKOS Flavors

Visit the New ROKOS website at: http://rokos.space

ROKOS v5 "Flavors" Released. Full OS with Cryptocurrency Clients, full nodes and much more. Faster, Easier, Stronger.

Just Burn and Click to Start your own Cryptocurrency Full Node or Client

Cryptocurrency and the Internet of Things
Flavors: Raspbian based OS with integrated Cryptocurrencies Clients, Nodes ready for use.

We've seen new services selling "stake miners" for different currencies, we support the new technology and uses for cryptocurrencies in the Raspberry Pi environments, hence we came up with a Free solution for every IoT enthusiast, developer, user, service that want to use their IoT devices with BTC, OK and more cryptocurrencies, or that would like to turn their Pi into a Staking device, It already integrates a fully functional Bitcoin + 11 Cryptocurrencies Clients and nodes as well to provide the users with the best and easier Out of the Box experience.

v5 "Flavors" Released

The First OS image release that merges the full power of Raspberry Pi 2, Banana Pi PRO & IoT Devices with Bitcoin and Cryptocurrencies:
- ROKOS v5 "Flavors" comes with integrated Cryptocurrencies Clients / nodes .

Distribution aimed for everyone, from new Pi users to Pi Developers, Ease of use Out of the Box.
Download & Burn, Ready for use.

March 07 2016

ROKOS v5 "flavors" for Raspberry Pi 2 - Download (2.2Gb)
March 07 2016
MD5 Checksum:
SHA-1 Checksum:
SHA-256 Checksum:
SHA-512 Checksum:


ROKOS History releases link.

*Official Download Links - Do Not Download from other sources, posts, links to ensure the security of your downloads*

Specs:

v5 "flavors" Release (Pi2) March 07 2016
- Full burnable OS Compatible with the Raspberry Pi systems.
- Full System / Programs Upgrade.
- Full Design Upgrade.
- Iceweasel browser.
- Autolog.
- Debian.
- Java Dev Tools.
- Easier to Use mod Update.
- Security and Optimization Update.
- Updated Out of the box Firewall ready for use (gui) (start in terminal: gufw)
- Includes Qt and complete set of Dev tools (For developers)
- Includes Qt 3.2.1 Native / Qt 5.5.1 for Cross compile !
- Works with other cryptocurrencies.
- 1024mb swap mod.
- Updated Cryptocurrencies Included:
Bitcoin, OKCash, Blackcoin, Gamecredits, Digitalcoin, Diamondcoin,
Energycoin, Europecoin, Soil, Metalcoin, Transfercoin, Mojocoin. (Readme.txt)
- Custom Login and Wallpapers.
- Cryptocurrencies nodes at /usr/local/bin/
- Easy Clients / Nodes Upgrades.
- Direct access to the Clients Via: Task bar and Menu > Internet.
- ZIP file - Compression: 2.2Gb image to download, 6.1GB uncompressed to burn.


Requirements:
ROKOS v5 "flavors":
- Raspberry Pi 2 (Pi2 full power use by debian jessie base)

- Min 8gb SD card and an External device (usb / hdd / ssd). To sync the Cryptocurrencies chains on the external device instead of the SD card.


Future Versions:
- Security updates.
- Chain Updates.
- More Cryptocurrencies will be integrated for an Out of the Box experience and adoption.
- Designs Updates.
- More wallets, programs or features, based on users/communities/developers feedback, support and/or cross collaborations.

ROKOS v5 "flavors" Screen Shots

"ROKOS" Initial Setup

1.- Download and Burn the ROKOS Image to a micro SD Card like you would with any other Pi Distro.
March 01 2016
ROKOS v5 "flavors" - DOWNLOAD

Steps for first boot

*Raspberry Pi 2:
User: pi / Password: raspberry , follow normal setup.

a) Type: sudo raspi-config
b) Set your Time Zone, change your pi user password and Expand the file system, restart.
After restart the system you can type:  "startx"   to start the user desktop.
c) System ready for use.

Welcome to the ROKOS Desktop

Final steps / BTC and OK Clients

a) Go to Menu > Internet and Click on your favorite Cryptocurrency Wallet

This will open the Cryptocurrency wallet and start sync.

*For some Cryptocurrencies the initial sync might take some days, wallets are fully usable after being fully Synchronized.

b) Always remember to make constant backups of your wallets and save them in USB or external media.

Use your wallets in ROKOS to plug HW and mine, Send/Receive, Stake, Share,
become a full node and support your favorite Cryptocurrency network, develop new applications,
etc, the limit is only in your imagination.


Important Security Notice:
*) Remember to create a backup for your Wallets, you can use the wallets to create them and save in different folders on a USB device.
You should ALWAYS have a backup of your wallet, Raspberry Pi Hardware, Raspbian and ROKOS Software are under development hence not responsible for missuses, electrical or compatibility issues that might cause a loss of information. It is as secure as one's ability to take care for it, same as a computer, so always have a backup of your wallets on an external device.

*) Some people tend to recommend getting a 128Gb MicroSD HC (High speed) , at the same time it does work, I do not recommend this solution, as microSD cards tend to get corrupted by the number of overwrites, to ensure the best functionality and security you should use an external HDD/USB storage device to store the chains.

You can start testing and developing new integration with ROKOS and your favorite cryptocurrencies for your IoT projects.

***********************

ROKOS is Released for Free to support Bitcoin OK and the crypto environment adoption
If you find this work valuable or if it helped your project and You would like to support feel free to share your donations at

BTC  15VrDkat5vD4FfycRk3E4e7EgqftzK6tm8
OK  PWZg5F7NurKDNGdckRpQgmShEQhEHmF5W5
GMC  GcVNPqcDdqZLbEh65eyo4ADPEKBsU4tyLi
BLK  B8kBAXZbkXDKJ9Zu7dcarUCp8SfnyoKWVe
DMD  dLSokViLNuMD1q6kssWMtv9vvgau4Yo5GV
DGC  DQfpBXe11e7YnWmyNpeg6wkESiWN1ENEPp
ENRG  e7t3em8YTwFRXeSQtXumhDBqQzzphoiQnu
ERC  EKz7czViBqwSu8Ne2omxaznMnkAY4FqkJB
METAL  MNgjwErYStsEfyKiSoUfyoX877kZcSpmZG
MOJO  MSztn2BwFjhgm9e5nEBwDzAr1r4UcxYLRY
TX  Tk38sE6rLz63JtbErecGgqJxdB5RKMdnbz
SOIL  0x3df2e34602fd5711b2f32daebeff96df0a4df113

Contact: OKtoshi at devteam@okcash.co

***********************

"Empower yourself and build your own Bitcoin and Cryptocurrencies Fullnode Guide"

ROKOS Guide from zero! Full steps for New Users
by SwedishBitMiner

---Prepare the MicroSD/MicroSDHC card---

(I did this on a Windows computer, and I dont know what tool to use for Mac to install the iso file Image burner, for this guide you will have to figure out that yourself, if you use Mac)

1. Download and install SD Formatter 4.0 (This is the tool to format the SD card) from:
Windows: https://www.sdcard.org/downloads/formatter_4/eula_windows/SDFormatterv4.zip
Mac: https://www.sdcard.org/downloads/formatter_4/eula_mac/SDFormatter_4.00B.pkg
(or find it yourself at: https://sdcard.org/downloads)

2. Insert the MicroSD/MicroSDHC card into your PC/Mac. (You will probably need an MicroSD to SD adapter for this).

3. Start SD Formatter 4.0 and click the [Option] button. In there you change from "FORMAT TYPE: QUICK" to "FORMAT TYPE: (FULL)Erase", just leave the "FORMAT SIZE ADJUSTMENT" in OFF and click the [OK] button so start the format. When the card is completely formatted click the [Exit] button to close SD Formatter.

4. Download and install Win32 Disk Imager (This is the iso file Image burner) from:
Windows: http://sourceforge.net/projects/win32diskimager/files/latest/download

5. Download ROKOS Core (rokos5.img.zip) and unzip the ISO file (This is the awesome ROKOS Core "Operating System" that we are going to install on the SD card) from:
Download: http://bit.ly/rokos5flavors
(or find it yourself at: http://rokos.space

6. Start Win32 Disk Imager, press the "little blue folder" and select the "rokos5.img" file that you did extract. Make sure your SD card is selected in the list to the right and press the [Write] button. It will tell you that it can corrupt the SD card, just press [Yes] to continue the installation, when the installation to the SD card is done press the [Exit] button to close Win32 Disk Imager.

7. Now "Safely remove" your SD card from the computer.

8. Put the MicroSD/MicroSDHC card in your Raspberry Pi 2, and make sure you got an USB Keyboard, Monitor (via HDMI), and and Internet cable connected to the Raspberry Pi 2 before you connect the power cable to your Raspberry Pi 2.

---Installing ROKOS ---
(The first boot of ROKOS )

1. Type:

Code:

sudo raspi-config

(and press enter)

2. Select:

Code:

1. Expand Filesystem

(and press enter) press enter again on the <Ok> button.

3. Select:

Code:

2. Change user password

(and press enter) press enter again on the <Ok> button. Type a new password (you will not see the letters) and press enter, type your new password again, and press enter. Then press the <Ok> button.

4. Select:

Code:

5. Internationalization Options

(and press enter) Then select:

Code:

I2. Change Timezone

(Choose your timezone)

5. Press the "TAB" button on your keyboard two times to get to the <Finish> button, and press enter. Then choose <Yes> to restart your system.

6. Type:

Code:

startx

(and press enter) your system will now start up and you are DONE!

ENJOY THIS AWESOME OPERATING SYSTEM!

What was that? 

[WigitGetIt]

Awesome. Glad to see the ROKOS is out. Very cool project.

Transfercoin can now be traded at Cryptopia. Click the image to see the market. Thanks to Bitcoindood and some social media magic.

Checkit out here: https://twitter.com/BitcoinDood/status/706705271662493696