[ANN][DCR] Decred - Community Governance | Bitcoin Devs | Lightning Network

[Ch3wbacca]

Maybe we can expect testnet coins to also go for money for memories like Bitcoin testnet coins do 

You're a fake Chewie. I'm the real 

We are both fake Chewies 

The real one is Peter Mayhew 

[ozboy2014]

should clarify your ticker now that you are bout to launch.. DCR has been taken by Deltacredit

[BitcoinForumator]

Put a timer here.

[dygus]

What's an electricity consumption for 280x and 290x?

[anders lokka]

What's an electricity consumption for 280x and 290x?

About 240w for an 280x while mining
About 360w for an 290x.

[dygus]

What's an electricity consumption for 280x and 290x?

About 240w for an 280x while mining
About 360w for an 290x.

Thank you
BTW that's a lot of noise and heat. IMO it'd easier to buy'em.

[anders lokka]

What's an electricity consumption for 280x and 290x?

About 240w for an 280x while mining
About 360w for an 290x.

Thank you
BTW that's a lot of noise and heat. IMO it'd easier to buy'em.

Yes,blake is not really the best mining algo in 2016.
Cpu's heat is quite high and also power consumption.

Will mine for a while, but,if price will not reach at least 2 usd like eth,will switch again to eth. Eth is less noise/heat and very low power consumption compared with decred testnet.
I'm mining eth with fan 40% and 65c temperature.
When i run cgminer for decred, my fan goes up to 70%-75% and temperature are over 70 c.
Not a good optimization.

Probably is better to buy. Will see...

[chrysophylax]

Hmm sorry no idea.. maybe its missing an export or so ?

I compile with ./configure --enable-opencl and it works just fine

I'll dive into it when I have more time. For the sake of completeness here's the config.log: http://fpaste.org/318868/54662242/

Thank you for your time

One question mate in ADL_SDK directory did you put file for support for amd GPU?

Pardon me, I don't understand. Could you elaborate?

You need to download the ADL_SDK library, and put the contents of the /include folder in the /ADL_SDK folder in your miner directory, before you do config/make. I'm sure if you google "adl sdk cgminer" you'll get lots more info.

Thanks, I just did that but the result is the same, the output remains

Code:

OpenCL...............: NOT FOUND. GPU mining support DISABLED
configure: error: No mining configured in

will duckduckgo around a bit later tonight. thanks again.

im in exactly the same boat - and have been for weeks now - with STILL no answer to this issue ...

and i am no novice to compiling software ... yet this EXACT same issue with both amd and nvidia systems ...

anyone know an answer to this? ... i cant do very much with it now until tomorrow night ...

#crysx

[poolmn]

Our Pool is ready:

https://pool.mn/dcr

Everything should be fine, please test and report any problems.

Many thanks to ocminer for help.

[skunk]

Hmm sorry no idea.. maybe its missing an export or so ?

I compile with ./configure --enable-opencl and it works just fine

I'll dive into it when I have more time. For the sake of completeness here's the config.log: http://fpaste.org/318868/54662242/

Thank you for your time

One question mate in ADL_SDK directory did you put file for support for amd GPU?

Pardon me, I don't understand. Could you elaborate?

You need to download the ADL_SDK library, and put the contents of the /include folder in the /ADL_SDK folder in your miner directory, before you do config/make. I'm sure if you google "adl sdk cgminer" you'll get lots more info.

Thanks, I just did that but the result is the same, the output remains

Code:

OpenCL...............: NOT FOUND. GPU mining support DISABLED
configure: error: No mining configured in

will duckduckgo around a bit later tonight. thanks again.

im in exactly the same boat - and have been for weeks now - with STILL no answer to this issue ...

and i am no novice to compiling software ... yet this EXACT same issue with both amd and nvidia systems ...

anyone know an answer to this? ... i cant do very much with it now until tomorrow night ...

#crysx

this worked for me:

Code:

./autogen.sh --enable-opencl
./configure --enable-opencl
make

[thefix]

Hmm sorry no idea.. maybe its missing an export or so ?

I compile with ./configure --enable-opencl and it works just fine

I'll dive into it when I have more time. For the sake of completeness here's the config.log: http://fpaste.org/318868/54662242/

Thank you for your time

One question mate in ADL_SDK directory did you put file for support for amd GPU?

Pardon me, I don't understand. Could you elaborate?

You need to download the ADL_SDK library, and put the contents of the /include folder in the /ADL_SDK folder in your miner directory, before you do config/make. I'm sure if you google "adl sdk cgminer" you'll get lots more info.

Thanks, I just did that but the result is the same, the output remains

Code:

OpenCL...............: NOT FOUND. GPU mining support DISABLED
configure: error: No mining configured in

will duckduckgo around a bit later tonight. thanks again.

im in exactly the same boat - and have been for weeks now - with STILL no answer to this issue ...

and i am no novice to compiling software ... yet this EXACT same issue with both amd and nvidia systems ...

anyone know an answer to this? ... i cant do very much with it now until tomorrow night ...

#crysx

I ended up running it with wine on linux, same speeds as on windows
Not ideal, but it works

[revelacaogr]

Our Pool is ready:

https://pool.mn/dcr

Everything should be fine, please test and report any problems.

Many thanks to ocminer for help.

please change the Getting Started Guide (( for cgminer decred settings )..........

[ocminer]

Our Pool is ready:

https://pool.mn/dcr

Everything should be fine, please test and report any problems.

Many thanks to ocminer for help.

No problem, you should announce it in the decred forums too probably to have it listed for launch:

https://forum.decred.org/forums/mining/

[poolmn]

Our Pool is ready:

https://pool.mn/dcr

Everything should be fine, please test and report any problems.

Many thanks to ocminer for help.

please change the Getting Started Guide (( for cgminer decred settings )..........

Working on that now.

[_ingsoc]

No problem, you should announce it in the decred forums too probably to have it listed for launch:

https://forum.decred.org/forums/mining/

I'm keeping track of them as well. So far I know of three four to list:

• http://coinmine.pl/dcr
• https://dcr.suprnova.cc
• http://decred.multicoin.co
• https://pool.mn/dcr

Edit: Forgot one - added as per ocminer's suggestion.

[revelacaogr]

in multicoin & pool.mn  pool :Pool 0 slow/down or URL or credentials invalid
No servers were found that could be used to get work from...........
wat's wrong?

[ocminer]

No problem, you should announce it in the decred forums too probably to have it listed for launch:

https://forum.decred.org/forums/mining/

I'm keeping track of them as well. So far I know of three to list:

• https://dcr.suprnova.cc
• http://decred.multicoin.co
• https://pool.mn/dcr

You've forgot coinmine.pl:

http://coinmine.pl/dcr

[freemind1]

From http://decred.multicoin.co/:

Code:

[2016-02-07 13:13:01] Started cgminer 3.7.2
[2016-02-07 13:13:01] Started cgminer 3.7.2
[2016-02-07 13:13:01] Probing for an alive pool
[2016-02-07 13:13:05] Pool 0 slow/down or URL or credentials invalid

[d-trix]

There's a lot of available mining pools, but which do you think is the most suitable pool to mine Decred?

[ocminer]

There's a lot of available mining pools, but which do you think is the most suitable pool to mine Decred?

You should mine solo, at least at launch and a few hours later.