chanberg
|
|
June 22, 2017, 02:35:29 PM |
|
Make sure the bios is the D version
Also put pcie in gen 2
Swap your risers around and make sure it's wired correctly and boot her up. If not try to power them on one by one
|
|
|
|
|
|
|
|
The Bitcoin network protocol was designed to be extremely flexible. It can be used to create timed transactions, escrow transactions, multi-signature transactions, etc. The current features of the client only hint at what will be possible in the future.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
bumblebee24
Full Member
Offline
Activity: 154
Merit: 100
www.valuebetting.org
|
|
June 22, 2017, 03:58:51 PM |
|
I have 5 GPU setup, everything works fines besides fan control.
Using global settings for fan speed and temperature it seems to be only apply to the GPU0 all others try to run to their optimal temp, while fans spin at 10-20%. Any idea how to make it so all 5 have same settings as GPU0?
|
|
|
|
wanheda
Newbie
Offline
Activity: 4
Merit: 0
|
|
June 23, 2017, 05:55:21 PM |
|
Hi, I have this error before login with 4 gpu (3 works perfect): *ERROR* amdgpu: IB test timed out. failed testing IB on GFX ring (-110). ib ring test failed (-110)
What can i do?. Thanks
|
|
|
|
wolfen
|
|
June 29, 2017, 02:18:25 PM |
|
Using z270a-pro Motherboard with latest bios (120) and crypto mining enabled in the bios.
Trying to use a cradlepoint cellular modem connected to verizon wireless to mine ethereum. Running Claymore v9.6
If I switch the RJ45 from my cable modem to the cell modem on the fly it runs for a bit then mining stops.
If I switch my Antminer S9 from the cable modem to the cell modem works great and has been for a week.
Any clues?
|
For those about to block we salute you! AC->BTC
|
|
|
wolfen
|
|
June 29, 2017, 02:30:56 PM |
|
Claymore works great with Awesome Miner as a monitor. Shows start hashing speed at max much faster than the ethos interface. I use both. Ethos rocks. So does Awesome Miner Monitor.
|
For those about to block we salute you! AC->BTC
|
|
|
Duncanopolus
Newbie
Offline
Activity: 1
Merit: 0
|
|
July 05, 2017, 07:30:12 PM Last edit: July 05, 2017, 08:17:24 PM by Duncanopolus |
|
Nvidia support provided. My congratulations! But there is a problem in Claimore-zcash: .....AMD OpenCL platform not found No AMD OPENCLGPUs found, exit....
optiminer-zcash: [error] Found no matching devices! Quitting!
Please, help Guys!
|
|
|
|
Jonesy
Newbie
Offline
Activity: 10
Merit: 0
|
|
July 06, 2017, 01:35:30 AM |
|
Nvidia support provided. My congratulations! But there is a problem in Claimore-zcash: .....AMD OpenCL platform not found No AMD OPENCLGPUs found, exit....
optiminer-zcash: [error] Found no matching devices! Quitting!
Please, help Guys!
Even though I havent tried EthOS yet, I think u will find some mining software on it only supports AMD cards, try use EWBF for nvidia cards.
|
|
|
|
alien2108
Copper Member
Newbie
Offline
Activity: 27
Merit: 1
|
|
July 18, 2017, 08:33:29 AM |
|
NVIDIA support was added so I switches to ethOS. I now have 6 ASUS 1070GTX cards working on Z270 without issues, but NVIDIA support is buggy and I hope someone from ethos is reading this:
Scripts for setting mem clock and gpu clock are written in a way where baseline Mhz is read and difference is calculated. But there is a problem with gpu clock!
My cards without overclock run on ~1560Mhz as reported by "nvidia-smi -q -d CLOCK", but when system starts somehow this clock gets bumped to MAX of ~1920Mhz for a brief moment, but long enough that ethOS writes this WRONG values to /var/run/ethos/defaultcore.file. Now the problem is, that you can't set clocks anymore. For example if I write "cor 1650" this will result in scripts setting totally wrong clocks as they calculate the difference between defaultcore and config core, which would wrongly result in 1650-1920 = -270 which is out of range and wrong anyhow. The correct result would be "1650-1560 = 90". This is all to the fact that nvidia-seettings use OFFSET for setting clocks and not raw value....
So my suggestion is to get the default clock somewhere else....ethos-oc-nvidia get's it with "/opt/ethos/sbin/ethos-readdata core" which now correctly reads the values:
1582 1582 1556 1594 1569 1544
but somehow during bootup this values are written in /var/run/ethos/defaultcore.file:
1911 1911 1949 1936 1936 1949
My suspicion is that you should have longer delay before reading default clocks, since some other process influences them in between....Or as I said, read theme somewhere else....
I can help you out with testing as I am many decades Linux user if you need any help....
PS: Also to notice that memclock overclocking is also not straightforward....as +100 does not mean +100Mhz...rougly +50....so you have to use approximately double value...but this is nvidia-settings issue not ethOS scripts....
|
|
|
|
Rostik
Newbie
Offline
Activity: 3
Merit: 0
|
|
August 24, 2017, 08:07:51 AM |
|
Hello. I have some questions. 1) Are you able to add new miner? CCminer?
2) And what about some notifications when miner falls or rig not online? For example to telegram.
3) What about option to automatic reboot when miner or card fall?
|
|
|
|
buffy007
Full Member
Offline
Activity: 254
Merit: 100
I solve problems
|
|
August 24, 2017, 11:47:02 AM |
|
3) set autoreboot true in conf
|
Zero & One - www.zero1apps.comApplications developer - Apps for mining pools and miners
|
|
|
Rostik
Newbie
Offline
Activity: 3
Merit: 0
|
|
August 24, 2017, 11:56:02 AM |
|
3) set autoreboot true in conf
just autoreboot true without any numbers?
|
|
|
|
bumblebee24
Full Member
Offline
Activity: 154
Merit: 100
www.valuebetting.org
|
|
August 24, 2017, 12:39:44 PM |
|
# autoreboot: set to a number (autoreboot 3), allow rigs to autoreboot if they soft crash (max of 3 reboots, run clear-thermals to reset counter)
Looks like you can set the autoreboot at either 1,2,3 or false; having it set to false it same as not having it in the config.
ex;
autoreboot false autoreboot true autoreboot 3
if set at true I'm assuming it will just keep rebooting everytime
|
|
|
|
kr3st
Newbie
Offline
Activity: 20
Merit: 0
|
|
September 03, 2017, 07:55:07 PM |
|
Now that 1.2.4 is out and it uses the new AMD drivers does that mean I can use my VEGA 64 cards to mine with on ethos?
|
|
|
|
opelgtman
Newbie
Offline
Activity: 13
Merit: 0
|
|
September 03, 2017, 08:33:36 PM |
|
I wish there was a trial of this OS. I'd hate to spend $39 and not be able to get it work.
|
|
|
|
bumblebee24
Full Member
Offline
Activity: 154
Merit: 100
www.valuebetting.org
|
|
September 03, 2017, 11:59:21 PM |
|
Now that 1.2.4 is out and it uses the new AMD drivers does that mean I can use my VEGA 64 cards to mine with on ethos?
The update was mainly for RX cards by looking at the change log. It did fix the DAG issue at least on my rigs. Not sure if anyone is running VEGA 64 on it, but, when rx560's first came out I ran them on ethos before official update and they worked. Ethos just didn't recognize their names. Kept saying unknown for card names but they hashed correctly.
|
|
|
|
alred911
Member
Offline
Activity: 72
Merit: 10
|
|
September 04, 2017, 02:16:22 AM |
|
hi everyone,
i just bought ETHOS 1.2.4
I have a bunch of 1070 but they are not recongnize by Ethos, they are detected (show in boot) that's it.
They clearly say they support NVDIA now but maybe im missing somehing ?
|
|
|
|
chanberg
|
|
September 07, 2017, 02:40:26 AM |
|
1.2.4 was a RX dag fix, but for some reason it also made my 1070's faster... was hashing at 30.2 now its going at 32.23... they probably fixed the tables which dictate the overclock speed.
|
|
|
|
duniek
Member
Offline
Activity: 70
Merit: 10
|
|
September 07, 2017, 03:25:13 AM Last edit: September 07, 2017, 11:41:56 AM by duniek |
|
I wish there was a trial of this OS. I'd hate to spend $39 and not be able to get it work.
if you make a little digging you can download it free, I did that and after week of testing i bought it 1.2.4 was a RX dag fix, but for some reason it also made my 1070's faster... was hashing at 30.2 now its going at 32.23... they probably fixed the tables which dictate the overclock speed.
config? globalcore ?? globalmem ?? powertune ?? btw i just checked gtx1070 windows7 mem +725 (4500) 32mhash @ claymore ethOS mem (4800) 31mhash @ethermine/claymore - same speeds core 1550/1600 (-400) or 1700(-200) doesnt change anything
|
|
|
|
chilliefly
Newbie
Offline
Activity: 18
Merit: 0
|
|
September 07, 2017, 01:07:44 PM |
|
I see the following has been added to latest release. Has anyone had any success with RX voltage. Ive tried but it seems the powerstage/powertune trumps it?!?!? Can anyone tell me how the voltage works with the RX Cards (i use 570,580 cards).
-Added ability to set voltage for RX series GPUs.
|
|
|
|
chanberg
|
|
September 07, 2017, 06:48:43 PM |
|
config?
globalcore ?? globalmem ?? powertune ??
btw i just checked gtx1070
windows7 mem +725 (4500) 32mhash @ claymore ethOS mem (4800) 31mhash @ethermine/claymore - same speeds
core 1550/1600 (-400) or 1700(-200) doesnt change anything
cor 1675 mem 5275 ptune 2 its stable. been running like that for 52 hours
|
|
|
|
|