ethOS - Ethereum Mining Platform

[Bigf00t]

look in the flags file

Thank you. I also find it in the ethOS 1.2.9 changelog now:
- Removed all claymore stubs, claymore confs moved to ethOS conf with flags option (now remote.conf is possible with claymore).

This makes it even more easier to control.

[hawlicjusz]

Guys I have a problem with ethos 1.27. I'm trying to mine on RX 580 and GTX 1050ti in one rig, and ethOS detects them both while booting, but when it loads in only detects RX 580 GPU. But when i start claymore it mines on both cards. The problem is that ethOS does not detect  1050ti so i I cannot overclock it. Any ideas what should i do?

[BSAlex]

Guys I have a problem with ethos 1.27. I'm trying to mine on RX 580 and GTX 1050ti in one rig, and ethOS detects them both while booting, but when it loads in only detects RX 580 GPU. But when i start claymore it mines on both cards. The problem is that ethOS does not detect  1050ti so i I cannot overclock it. Any ideas what should i do?

RTFM

Ethos never supported mixed Nvidia and AMD in single system.
Split you rig or use different OS.

[Bimmber]

Will ETH os run 18 or 19 nvidia cards on Asus B250 mining expert? Very little information available online.

[greyday]

Will ETH os run 18 or 19 nvidia cards on Asus B250 mining expert? Very little information available online.

If your mobo can handle it, I would assume Ethos can too, but not sure. You can try writing the devs, they usually respond within a day or two.

[Bimmber]

Have you got their contact details?

[greyday]

Have you got their contact details?

No, it should be on the website though.

[Jrggnet]

Hello guys, I just Update Claymore 11.0 on ethos 1.2.9, Do you have a sample conf for XVG Mining?

[Jrggnet]

SOLVED!!

here is my Dual Config

dualminer-coin blake2s
dualminer-pool stratum+tcp://s.antminepool.com:9008
dualminer-wallet "Your XVG ADDRESS"
dualminer-poolpass C=XVG
claymore=flags -dcri 50 (This is for my gpu, you can play with that)

Happy mining

[Bimmber]

Hello guys, I just Update Claymore 11.0 on ethos 1.2.9, Do you have a sample conf for XVG Mining?

How can you check current revision of claymore on ethos?

[Bimmber]

Ethos doest have latest nvidia driver 390.25 from 29th of January 2018.

https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FWBgWotv.jpg&t=585&c=coWz-ny7ts9iFw

[hagbase]

http://ethosdistro.com/kb/#installing-fixes

[D1NG0]

Hello guys, I just Update Claymore 11.0 on ethos 1.2.9, Do you have a sample conf for XVG Mining?

How can you check current revision of claymore on ethos?

Open your EthOS rig status. It will be on (your_rig_id).ethosdistro.com. Hover the mouse over the 'M' column value. If you are running Claymore, it would show which version.
On EthOS 1.2.9, it is v10.2, and unless you manually update your Claymore miner in your EthOS system, it will remain same till EthOS' next update.

[Bimmber]

http://ethosdistro.com/kb/#installing-fixes

Thank you very much! Updated. I now get more sol/s from my rig.

https://i.imgur.com/kLgtbzZ.jpg

[Bimmber]

Hello guys, I just Update Claymore 11.0 on ethos 1.2.9, Do you have a sample conf for XVG Mining?

How can you check current revision of claymore on ethos?

Open your EthOS rig status. It will be on (your_rig_id).ethosdistro.com. Hover the mouse over the 'M' column value. If you are running Claymore, it would show which version.
On EthOS 1.2.9, it is v10.2, and unless you manually update your Claymore miner in your EthOS system, it will remain same till EthOS' next update.

I`m mining zcash with DSTM, 0.5.8. (latest). Thank you.

[chem96]

SOLVED!!

here is my Dual Config

dualminer-coin blake2s
dualminer-pool stratum+tcp://s.antminepool.com:9008
dualminer-wallet "Your XVG ADDRESS"
dualminer-poolpass C=XVG
claymore=flags -dcri 50 (This is for my gpu, you can play with that)

Happy mining

Interesting, thank you. (sorry no more sMerit)
How much XVG do you reach pro card and what incidence on the GPU temperature?

[kriskarthik]

I was running in version 1.2.7 and I set the max temp as 80. My rig behaves like whenever temp goes near 76-77c it will stop mining that particular GPU.

Today I upgraded to 1.2.9 and now ethOS is not stopping the GPU even until 79c.

Is there a change the way it was working with respect to temperatures ?

Any idea?

[greyday]

I was running in version 1.2.7 and I set the max temp as 80. My rig behaves like whenever temp goes near 76-77c it will stop mining that particular GPU.

Today I upgraded to 1.2.9 and now ethOS is not stopping the GPU even until 79c.

Is there a change the way it was working with respect to temperatures ?

Any idea?

Yeah, set your max temp to 77.

[Jrggnet]

SOLVED!!

here is my Dual Config

dualminer-coin blake2s
dualminer-pool stratum+tcp://s.antminepool.com:9008
dualminer-wallet "Your XVG ADDRESS"
dualminer-poolpass C=XVG
claymore=flags -dcri 50 (This is for my gpu, you can play with that)

Happy mining

Interesting, thank you. (sorry no more sMerit)
How much XVG do you reach pro card and what incidence on the GPU temperature?

So unstable pools these days, like 60-70% whattomine calc, Im switching between uniminig and antminepool

[kriskarthik]

Yeah, set your max temp to 77.

Thanks for your reply. But my problem is quiet different. When the temperature threshold reached I expect only that one GPU to into throttled mode. That’s is the way it was working before in version 1.2.7. But now after upgrade the entire rig is crashing.