monoxide
|
|
October 21, 2017, 08:31:02 AM |
|
noooooooo pls no compile errors, i hate that shit ((( so we need 2 recompile and import priv key? Yep, having compile problems too, but in my case it seems to be a problem with linking leveldb. I'm trying to figure it out. Btw. your wallet.dat is always stored at the same place, there is no need to import anything. Edit: Maybe we can collect compile problems in the #dev channel on Discord, so that it is all in one place?Yes, please do that and I'll get someone to look at them.
|
|
|
|
wttbs
Legendary
Offline
Activity: 2210
Merit: 1109
|
|
October 21, 2017, 08:50:26 AM |
|
qt would even compile 0.8.6.9 Project MESSAGE: Building with UPNP support Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. tried with command qmake and qmake "USE_UPNP=-" and qmake "USE_UPNP=1" had no problems compiling current version of Espers edit: before downloading and compiling 0.8.6.9 I ran: sudo apt-get install qt5-default qt5-qmake qtbase5-dev-tools qttools5-dev-tools build-essential libboost-dev libboost-system-dev libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev libssl-dev libdb++-dev libminiupnpc-dev
no errors since 0.8.6.9 I tried to start 0.8.6.8 again to start staking again, now I get this error: ./Espers-qt: error while loading shared libraries: libboost_system.so.1.54.0: cannot open shared object file: No such file or directory
Espers qt-wallet broken on Linux for now I will try to install new wallet on Windows but I would like to Linux
|
|
|
|
Gandalf86
|
|
October 21, 2017, 09:17:11 AM |
|
since 0.8.6.9 I tried to start 0.8.6.8 again to start staking again, now I get this error: ./Espers-qt: error while loading shared libraries: libboost_system.so.1.54.0: cannot open shared object file: No such file or directory
Espers qt-wallet broken on Linux for now I will try to install new wallet on Windows but I would like to Linux You probably updated libboost-system in the previous step. After updating libraries, you must recompile all programs that are linked against it.
|
Discord: Gandalf86#5805 (#341695925166538796) // Maintainer of Titcoin // Work smarter, not harder!
|
|
|
wttbs
Legendary
Offline
Activity: 2210
Merit: 1109
|
|
October 21, 2017, 11:24:02 AM |
|
since 0.8.6.9 I tried to start 0.8.6.8 again to start staking again, now I get this error: ./Espers-qt: error while loading shared libraries: libboost_system.so.1.54.0: cannot open shared object file: No such file or directory
Espers qt-wallet broken on Linux for now I will try to install new wallet on Windows but I would like to Linux You probably updated libboost-system in the previous step. After updating libraries, you must recompile all programs that are linked against it. When I recompile (old/previous working version) I get this error (same as with new version) Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized.
|
|
|
|
Gandalf86
|
|
October 21, 2017, 11:34:26 AM |
|
Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. That's ok, it's purely informational. You can continue by running 'make'.
|
Discord: Gandalf86#5805 (#341695925166538796) // Maintainer of Titcoin // Work smarter, not harder!
|
|
|
wttbs
Legendary
Offline
Activity: 2210
Merit: 1109
|
|
October 21, 2017, 11:43:47 AM |
|
Removed plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. That's ok, it's purely informational. You can continue by running 'make'. 0.8.6.8 is running again when I MAKE 0.8.6.9 I get this error In file included from src/version.cpp:6:0: src/version.h:49:14: error: ‘int64_t’ does not name a type static const int64_t HRD_LEGACY_CUTOFF = 1509537600; // ON (TOGGLED 11/01/2017) ^ src/version.h:52:14: error: ‘int64_t’ does not name a type static const int64_t HRD_FUTURE_CUTOFF = 9993058800; // OFF (NOT TOGGLED) ^ Makefile:2322: recipe for target 'build/version.o' failed make: *** [build/version.o] Error 1
|
|
|
|
pshemek
|
|
October 21, 2017, 11:47:42 AM |
|
new wallet this is great news. now we can start talking about all the great things this project has and not only commenting on all the fud.
|
|
|
|
Adriano2010
|
|
October 21, 2017, 11:55:35 AM |
|
Is there a new wallet for all OS systems? And it needs to be compiled to run or can be runned with just any other .exe program for windows?
|
|
|
|
Gandalf86
|
|
October 21, 2017, 12:00:07 PM |
|
Is there a new wallet for all OS systems? And it needs to be compiled to run or can be runned with just any other .exe program for windows?
For Windows and Mac OS there are new binary wallets available on https://espers.io/downloads/Linux and other Unix must compile their own version because there are too many different systems.
|
Discord: Gandalf86#5805 (#341695925166538796) // Maintainer of Titcoin // Work smarter, not harder!
|
|
|
foggywhite007
Member
Offline
Activity: 112
Merit: 11
|
|
October 21, 2017, 02:11:50 PM |
|
I think this take-off point for ESP. the team began to work hard. the updates went.
Now this project need to attract more attention. Need social networking to load. Maybe bounty to do. To shoot video even short about the team and about the project in order to strengthen the credibility of the project. And then only remains to follow the road map and all will be well esp
|
|
|
|
deztroyr1
|
|
October 21, 2017, 02:53:06 PM |
|
yea good to see some action going on here. yesterday i had decided to join in a bit... with the development i see today i don't think i will regret it. is there a plan to decrease the amount of coins? there seem to be an awful lot of them
|
|
|
|
gawajn
|
|
October 21, 2017, 03:46:57 PM |
|
Great to see the update which fixes Pow. Is Cryptocoderz now working on the PoS "fix", which let people with low amount of espers stake more often?. Will later try to compile it!
|
|
|
|
Gandalf86
|
|
October 21, 2017, 04:43:35 PM |
|
is there a plan to decrease the amount of coins? there seem to be an awful lot of them The supply has already been decreased from 500 billion. There's a reason for having that many coins, which is having a very small minimum unity that can be used for paying for micro-services, e.g. forwarding a single data packet. (That's my interpretation of it.) I've always been of the opinion that reducing the coin supply to 50 billion was already a mistake (albeit a rather small one. ) Great to see the update which fixes Pow. Is Cryptocoderz now working on the PoS "fix", which let people with low amount of espers stake more often?.
Yes, this seems to be the next item on the todo list, according to what Monoxide said in Discord.
|
Discord: Gandalf86#5805 (#341695925166538796) // Maintainer of Titcoin // Work smarter, not harder!
|
|
|
l3pox
Legendary
Offline
Activity: 2674
Merit: 1168
There's no need to be upset
|
|
October 21, 2017, 06:36:28 PM |
|
is there any plans to be added on other bigger exchanges?
cheers.
|
| Duelbits | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ | | TRY OUR UNIQUE GAMES! ◥ DICE ◥ MINES ◥ PLINKO ◥ DUEL POKER ◥ DICE DUELS | | | | █▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄ | ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ | ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ | ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ | ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ | ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ ███ ▀▀▀ | | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ KENONEW ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄█ | | 10,000x MULTIPLIER | | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ | | ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ |
[/tabl
|
|
|
kiddo
|
|
October 21, 2017, 06:50:36 PM |
|
Great job, waithing for this for a very long time. Is good to see the espers team all toghether and working, people have a lot of expectations about this project, me included. Keep the work going guys and you and us alongside we will see the success of the project.
|
|
|
|
ctgiant
|
|
October 21, 2017, 08:42:30 PM Last edit: October 21, 2017, 09:49:30 PM by ctgiant |
|
thx dev for Update i have a compile error In file included from version.cpp:6:0: version.h:49:14: error: ‘int64_t’ does not name a type static const int64_t HRD_LEGACY_CUTOFF = 1509537600; // ON (TOGGLED 11/01/2017) ^ version.h:52:14: error: ‘int64_t’ does not name a type static const int64_t HRD_FUTURE_CUTOFF = 9993058800; // OFF (NOT TOGGLED) ^ makefile.unix:202: recipe for target 'obj/version.o' failed make: *** [obj/version.o] Error 1 please fix that ... thx espers still has a very good future ahead, very good team, continues to do so ... 0.8.6.8 is running again when I MAKE 0.8.6.9 I get this error In file included from src/version.cpp:6:0: src/version.h:49:14: error: ‘int64_t’ does not name a type static const int64_t HRD_LEGACY_CUTOFF = 1509537600; // ON (TOGGLED 11/01/2017) ^ src/version.h:52:14: error: ‘int64_t’ does not name a type static const int64_t HRD_FUTURE_CUTOFF = 9993058800; // OFF (NOT TOGGLED) ^ Makefile:2322: recipe for target 'build/version.o' failed make: *** [build/version.o] Error 1
: add this to version.h right under "include <string>" and you should be able to compile: #include <stdint.h> Edit: I wanted to add since some people are having issues compiling with newer openssl dependencies, libssl-dev-1.1.0 or openssl versions 1.1.x are not currently compatible. To build, install libssl-dev-1.0.1 or the correct corresponding package for your current linux distro. If your distro's package manager no longer has those packages available you will have to build openssl from source and link the libraries and headers manually when building.
|
|
|
|
mafia
|
|
October 21, 2017, 10:26:07 PM |
|
DO we know when masternodes are coming and the coins required?
|
|
|
|
batysta
Newbie
Offline
Activity: 47
Merit: 0
|
|
October 22, 2017, 12:06:03 AM |
|
add this to version.h right under "include <string>" and you should be able to compile: #include <stdint.h>
Edit:
I wanted to add since some people are having issues compiling with newer openssl dependencies, libssl-dev-1.1.0 or openssl versions 1.1.x are not currently compatible. To build, install libssl-dev-1.0.1 or the correct corresponding package for your current linux distro. If your distro's package manager no longer has those packages available you will have to build openssl from source and link the libraries and headers manually when building.
It worked like a charm. Thanks!
|
|
|
|
meincagadero
Newbie
Offline
Activity: 28
Merit: 0
|
|
October 22, 2017, 05:58:34 AM |
|
DO we know when masternodes are coming and the coins required? Some time ago was talked about 25Mill to owe one masternode and they will come (if) at this development speed in about 10 or 15 years
|
|
|
|
mafia
|
|
October 22, 2017, 07:47:02 AM |
|
DO we know when masternodes are coming and the coins required? Some time ago was talked about 25Mill to owe one masternode and they will come (if) at this development speed in about 10 or 15 years
|
|
|
|
|