[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[tymeksm]

Miners update:
- verthashminer-v0.7.1 (Changed "difficulty to target" formula to a more reliable one. Miner will no longer load NVML and ADL libraries when they are not needed. OpenCL back-end will now report error codes along with messages. Fixed NVIDIA OpenCL devices restrictions when compiled with CUDA 10 or lower. Added GPU memory errors tracker. Invalid shares will be discarded)

[flminer]

Trying to get a rig set up on your OS. Getting stuck at "root@simplemining" I don't think it is accepting the email for some reason. Flashed the OS that your site shows and changed email. Help please. Thanks

***Just scrolled up a little. v1305 is the one I flashed. Going to try v1297.

******Doing the same thing. Need a little help with this

[tymeksm]

Miners update:
- xmrig-v6.10.0 (Fixed pause logic when both pause on battery and user activity are enabled. Fixed many new job messages when solo mining. Fixed crash in cn-heavy on Zen3 with manual thread count. Fixed possible out of order write to log file. http-parser replaced to llhttp)


Miners update:
- gminer-v2.47 (Improved stability)



Miners update:
- nanominer-v3.3.0 (Added dual with Zilliqa for coins: Ethereum,Ethereum Classic,Conflux,Ergo. Example of configure dual mining available in miner description. Reduced dev fee on Ergo: 5% to 2.5%. Fixed memClocks and coreClocks on NVidia. Removed Pascal Coin)


SimpleMining images update:
- SM-5.4.98-1-ub18-a20.40-n460.56-v1305 (New fixed image for all supported GPUs. Previous images had problem with missing config.txt file on certain very slow pendrives. New image has this problem fixed and will work on all pendrives. If you have problem with missing config.txt file, please download and flash this image. Image is also available via AdvancedCommands)

[moderator's note: consecutive posts merged]

[Wotan Wipeout]

Thx for this great os. Have all my rigs on it.
For the display of RAM-Temp i can only use windows.
Are you working on showing the vram temp?
Like you do with the AMD 5xxx series?
Is there any eta?

thx

[tymeksm]

Miners update:
- nanominer-v3.3.1 (Added dual Raven + Zilliqa. Fixed an issue with 2Miners pool)


SimpleMining images update:
- Updated all 3 optional images for advaned users available via Advanced Commands.
- SM-5.4.98-1-ub18-a20.30-n460.56, SM-5.4.98-1-ub18-a18.20-n430.40 and SM-5.4.98-1-ub18-a20.30-Radeon-VII.
- All those three images (and official one released yesterday) are free of the last issue with missing config.txt file reading on very slow USB pendrives.


Miners update:
- srbminer-multi-v0.7.0 (Reduced power consumption on autolykos2 for Ellesmere 2-3%, verthash for Ellesmere 5%, verthash for Vega 10%. Performance increase on verthash for Vega GPU's ~3%. Added --verthash-dat-path. Fixed verthash stack smash issue. Fixed watchdog not triggering on dead GPU issue. Fixed crash on panthera algorithm. Removed --gpu-watchdog-disable-mode, --watchdog-rounds. Minor bug fixes)

[moderator's note: consecutive posts merged]

[tytanick]

Does anyone know how Fan control work for RTX 3070?
Are there any command? Sliders does not work.

Okay, case solved. If someone run into the same problem. Mixed rigs are not supported, mixed rigs does not mean amd and nvidia in the same rig, it means different GPU's are not supported: 3070 with 2060 etc.
I had 3070 and 2060 super in same rig, fan control does not work, if i removed 2060 super, fan control works as a charm.

I have the same issue with 3070 mixed with 1080ti...

All nvidia fanspeed issues are fixed right ? (except the one that one fan is not spinning in 3xxx series in some models) ?

Hello all. Started mining (as hobby) again after 2 years and enjoying the updated GUI.
Is there any way to see the motherboard temperature? As in from RigList or Shellinabox?

We do not support checking motherboard temperature - it is not needed anyway.

if 1 have 6 rx6800xt what is he best smos firmware i should use?
can anyone help?

Just use newest from website. If you have any problems please report to admin@simplemining.net

Trying to get a rig set up on your OS. Getting stuck at "root@simplemining" I don't think it is accepting the email for some reason. Flashed the OS that your site shows and changed email. Help please. Thanks

Maybe your bios is not set up right or drive is broken ? Can you try different drive ?

Thx for this great os. Have all my rigs on it.
For the display of RAM-Temp i can only use windows.
Are you working on showing the vram temp?
Like you do with the AMD 5xxx series?
Is there any eta?

Which GPU does not show mem temperatures ? We are not showing it in rx5500 and in nvidia due to lack of support in driver.

my new 6800xt is mine 0 hash rate
I have a 1 card rig with
5.4.98-sm1 / amd20.40r5.6.31 / v1305
some help please
using phoenix 5.4c
-eres 4 -pool daggerhashimoto.usa.nicehash.com:3353 -wal BTC addy -pass x -proto 4 -rmode 2 -stales 0

Can You report this problem via email admin@simplemining.net ?
I will take a look.

[philipma1957]

Does anyone know how Fan control work for RTX 3070?
Are there any command? Sliders does not work.

Okay, case solved. If someone run into the same problem. Mixed rigs are not supported, mixed rigs does not mean amd and nvidia in the same rig, it means different GPU's are not supported: 3070 with 2060 etc.
I had 3070 and 2060 super in same rig, fan control does not work, if i removed 2060 super, fan control works as a charm.

I have the same issue with 3070 mixed with 1080ti...

All nvidia fanspeed issues are fixed right ? (except the one that one fan is not spinning in 3xxx series in some models) ?

Hello all. Started mining (as hobby) again after 2 years and enjoying the updated GUI.
Is there any way to see the motherboard temperature? As in from RigList or Shellinabox?

We do not support checking motherboard temperature - it is not needed anyway.

if 1 have 6 rx6800xt what is he best smos firmware i should use?
can anyone help?

Just use newest from website. If you have any problems please report to admin@simplemining.net

Trying to get a rig set up on your OS. Getting stuck at "root@simplemining" I don't think it is accepting the email for some reason. Flashed the OS that your site shows and changed email. Help please. Thanks

Maybe your bios is not set up right or drive is broken ? Can you try different drive ?

Thx for this great os. Have all my rigs on it.
For the display of RAM-Temp i can only use windows.
Are you working on showing the vram temp?
Like you do with the AMD 5xxx series?
Is there any eta?

Which GPU does not show mem temperatures ? We are not showing it in rx5500 and in nvidia due to lack of support in driver.

my new 6800xt is mine 0 hash rate
I have a 1 card rig with
5.4.98-sm1 / amd20.40r5.6.31 / v1305
some help please
using phoenix 5.4c
-eres 4 -pool daggerhashimoto.usa.nicehash.com:3353 -wal BTC addy -pass x -proto 4 -rmode 2 -stales 0

Can You report this problem via email admin@simplemining.net ?
I will take a look.

Got it to work I changed ram settings it is fine now.

[Wotan Wipeout]

On 5700 / XTs the Ram temp is shown.
Any workaround for the 3080s?
Because HWinfo shows the ram temp of 3080s.
Would be a shame if i had to stick to windows.
Lots of waterblocks coming for my 3080s

[tytanick]

On 5700 / XTs the Ram temp is shown.
Any workaround for the 3080s?
Because HWinfo shows the ram temp of 3080s.
Would be a shame if i had to stick to windows.
Lots of waterblocks coming for my 3080s

We are still working on it as the getting this information is not direct in linux.

In a mean time there is fix for 3080 throttling problem and soon we will make medium.com blog post about it.
If you 3080 is throttling due to memory temp (most probably it is). Then you "just" need to buy new good quality thermal pads and replace existing ones.
Put 2mm on memory chips and 1mm on rest of GPU.
We will make in 1-2 weeks article about this problem.

[Wotan Wipeout]

Thx for the Tipp, but i will go full watercooled.
Atm ETH is the most profitable coin, followed by octopus algo.
I want to be ready for power hungry coins and my 3080 Supreme X have a big powertarget.
Cooling a few GPUs with over 400 Watt each wouldnt be possible on a closed rig.

I have never seen such monstrous graphic cards....

[tytanick]

Thx for the Tipp, but i will go full watercooled.
Atm ETH is the most profitable coin, followed by octopus algo.
I want to be ready for power hungry coins and my 3080 Supreme X have a big powertarget.
Cooling a few GPUs with over 400 Watt each wouldnt be possible on a closed rig.

I have never seen such monstrous graphic cards....

Yeah, they are big
OK

[BogdanCo]

Does anyone know how Fan control work for RTX 3070?
Are there any command? Sliders does not work.

Okay, case solved. If someone run into the same problem. Mixed rigs are not supported, mixed rigs does not mean amd and nvidia in the same rig, it means different GPU's are not supported: 3070 with 2060 etc.
I had 3070 and 2060 super in same rig, fan control does not work, if i removed 2060 super, fan control works as a charm.

I have the same issue with 3070 mixed with 1080ti...

All nvidia fanspeed issues are fixed right ? (except the one that one fan is not spinning in 3xxx series in some models) ?

Are fixed now, thanks!

[tymeksm]

Miners update:
- verthashminer-v0.7.2 (Fixed nonce range calculation for GBT)


SimpleMining images update:
- SM-5.4.105-1-ub18-a20.40-n460.56-v1305 (Updated official SimpleMining image with supporting more 2.5 Gbit network adapters in newest motherboards. Image available in download section and via AdvancedCommands)


Miners update:
- t-rex-v0.19.12 (Ethash - add ethproxy (getwork) mode. Fix API security vulnerability that allows creating / modifying PC files when API is bound to 0.0.0.0 in --api-read-only mode. Fix No connection error. FIx --watchdog-exit-mode doesn't always reboot the PC in r mode)


Miners update:
- nanominer-v3.3.2 (Autolykos performance improvements about 40% for AMD Vega family (RX Vega 56, RX Vega 64, Radeon VII)


Miners update:
- nbminer-nebutech-v37.0 (new algo ERGO for Nvidia GPUs. Delete algo: bfc cuckarood for Nvidia, octopus for AMD. Fix octopus support CFX new address format. Fix clBuildProgram error issue on Vega for versions 35.0 - 36.1. Disable AMD iGPU by default, can be enabled back by setting --enable-igpu. Other minor bug fix, improve overall stability)


Miners update:
- srbminer-multi-v0.7.1 (Improvement on autolykos2. Fixed crash on panthera on non-ryzens. Minor bug fixes)


SimpleMining images update:
- New BETA image with AMD RX 6700 support - SM-5.4.107-1-ub18-a20.40-n460.67

[moderator's note: consecutive posts merged]

[tf2addict]

simplemining.net is down?  Does this affect mining?

[S780]

wow first time simplemining is crashed...(((

[Dragstar]

Is it hacked? can’t log in to web site

[tytanick]

Currently there is problem in our datacenter in Amazon AWS. We are fixing it.
Our Redis cluster is having problems.
Rigs are mining as usual. Dashboard is unavailable.

The problem is solved for now but our Hosting operator is working with Amazon AWS Support to find out why Redis cluster broke itself.

wow first time simplemining is crashed...(((

Very first from 3 years yes.

[tymeksm]

Miners update:
- sgminer-fancyIX-v0.7.4 (Added Navi support for groestlcoin. Aadd gfx803 and gfx900 bin kernel for groestlcoin)
- teamredminer-v0.8.1.1 (Minimal one-line update: device id added for 6700XT. No need to upgrade for other users)


Update v1307:
- Added OCTOMINER and MINERDUDE all in one mining rack cases support. Integrated OLED display in case provide most important details: rig name, IP number, miner name, hashrate, power usage, temp, fan. Watchdog works after enabling it in rig options (SRR Watchdog enable to ON). Case fans can be adjusted to certain % using advanced overclocking in rig options.
- Added support for cheap USB watchdogs, v3.2 with black board and v5.0 with red board


[moderator's note: consecutive posts merged]

[tytanick]

SRRv2 firmware update
We released new firmware v1.5 for SRRv2 and new Tool that fixes problem with connection between SRRTool and SRRv2 after windows update. FYI SRRv2 are still out of stock.

[tymeksm]

Miners update:
- nbminer-nebutech-v37.1 (Fix ergo high reject ratio on 10 series Nvidia GPUs. Fix ergo pool compatibility. Recommend miners with p106-90 & 1060 3G to mine ERGO, hashrate will be increased significantly with -mt option)


Miners update:
- gminer-v2.49 (Improved DAG generation, now miner generates valid DAG in extremal OC modes. --safe_dag option allows you to choose a way to DAG generation. Improved memory tweaks(fixed problem with possibly broken DAG on epoch change)


Miners update:
- t-rex-v0.19.14 (Octopus minor performance improvements for 16 series GPUs. Ethash, Etchash - add --validate-shares parameter to enable share validation and display share difficulty. Fixed memory tweaks have no effect on some 1060 cards. Fixed miner fails to start after Linux kernel update. Fixed API invalid stats if power usage reporting is not supported. Various UI fixes. Since this version t-rex miner package contains script named reboot.sh, that can be used for example with option --script-crash for rig reboot during miner/gpu issues detected by t-rex miner itself. This script also send some logs to dashboard just before rebooting rig)

[moderator's note: consecutive posts merged]