|
tymeksm
|
 |
September 13, 2024, 06:53:24 AM |
|
Miners update
- lolminer-v1.89 (Added support to mine Karlsenhash V2 on Nvidia Pascal and newer and AMD RX 5000 and newer. Use -a KARLSENV2 to mine it, fee is 1%. Added support to dual mine Karlsen V2 and Autolykos V2 with Ton / Gram and similar. Use --dualmode TONDUAL for adding these dual options to the existing config. Added support to mine BLOCX. BLOCX mining uses Autolykos V2 and can so be requested with -a AUTOLYKOS2 just as for Ergo mining. The different stratum of BLOCX is automatically detected and used when connected to a BLOCX pool. Fixed issues mining Autolykos V2 (Ergo / BLOCX) for Nvidia Pascal and newer and AMD RX 5000 and newer gpus. Updates to add Karlsenhash V2 and Autolykos V2 to older AMD cards is work in progress)
|
|
|
|
|
|
tymeksm
|
|
September 16, 2024, 07:40:16 AM
Last edit: September 16, 2024, 09:29:16 AM by tymeksm |
|
Miners update
- aleo-miner-v3.0.3 (Mining performance improved by 12% to 15%)
- onezerominer-v1.4.0b (Add experimental support of AMD gpus for Xelis (3% dev fee). Supported Cards are Vega 10, Vega 20, RDNA 1, 2 and 3. Add --disable-amd and --disable-nvidia flags. Note: This is a linux only beta release to get some feedback on the platform. Using it for anything other than mining Xelis with AMD gpus is not recommended. Polaris cards are not supported in this version. They might be included in the final release)
- rqiner-v1.0.9b (Improved CPU performance by ~5%. Replaced SIGINT with SIGTERM (+ SIGKILL in case of failure) to killing the idle command process)
Miners update
- lolminer-v1.90 (Added support to mine Heavyhash-Pyrin V2 on Nvidia GTX 1000, AMD RX 5000 and newer gpus. Use -a PYRINV2 to select the algorithm, fee is 1%. Added dual mining support for Autolykos V2 + Pyrin V2, Karlsen V2 + Pyrin V2 and Fishhash + Pyrin V2 for Nvidia GTX 1000 and newer and AMD RX 6000 and newer GPUs. Use --dualmode PYRINV2DUAL to add Pyrin V2 mining to the existing configs for the mentioned host algorithms. Already in 1.89, but undocumented: slightly improved Gram performance on some GPUs. Fixed a bug making Pyrin V1 non available on 1.89. Fixed a bug causing Nvidia GTX 1000 cards to crash on Fishhash dataset generation)
|
|
|
|
|
|
tymeksm
|
|
September 18, 2024, 11:13:58 AM
Last edit: September 19, 2024, 09:39:20 AM by tymeksm |
|
Miners update
- aleo-miner-v3.0.4 (Improved mining performance. Optimized the network connection between pool and miner)
Miners update
- rigel-v1.19.1 ((PYI) Minor performance improvements on Ampere GPUs and newer (2-3%))
- rqiner-v1.0.9c (Improved x86 performance by ~5%)
- srbminer-multi-v2.6.5 (Added algorithm 'astrixhash' (Astrix coin) for GPU mining fee 1.00%)
|
|
|
|
|
|
tymeksm
|
|
September 23, 2024, 09:47:58 AM |
|
Miners update
- lolminer-v1.91 (Added support to mine Autolykos V2 (Ergo, BlocX) and KLS V2 on RX 400, RX 500, AMD Vega, VII and AMD MI 200 and MI 300 series. Added Autolykos V2, Karlsenhash V2 and Fishhash dual mine capabilities with Gram / Ton for all above mentioned cards. AMD VII, MI 200 and 300 series additionally got PYRINV2 dual mine capacities. A manual dualfactor setting might be needed in case the automatic tuning drops the factor to 0 or a too low value. Improved performance of Fishhash on RX 400 and 500 series by about 3%)
- rqiner-v1.0.9d (Improved performance by ~5%)
|
|
|
|
|
|
tymeksm
|
|
September 25, 2024, 06:19:30 AM |
|
Miners update
- teamblackminer-v2.26 (In dual mining mode, if the zil pool is not available continue to mine 1 algo and retry/restart in a few hours. Fixed cpu verification error zil @ k1pool.com. Fixed crash on startup in vertcoin mining with many cards in the rig. Improved the exit code when a gpu has crashed)
|
|
|
|
|
|
tymeksm
|
|
September 26, 2024, 11:01:28 AM |
|
Miners update
- aleo-miner-v3.0.6 (updated)
- rqiner-v1.0.10 (implemented EP128 changes)
- srbminer-multi-v2.6.6 (Added algorithm 'hoohash' (Hoosat coin) for GPU mining [AMD/NVIDIA/INTEL], fee 2.00%. Added support for dual mining FISHHASH/HOOHASH on AMD RDNA/RDNA2/RDNA3, NVIDIA (except Pascal). Added support for dual mining KARLSENHASHV2/HOOHASH on AMD RDNA/RDNA2/RDNA3, NVIDIA (except Pascal). Added support for dual mining AUTOLYKOS2/HOOHASH on AMD RDNA/RDNA2/RDNA3, NVIDIA. Added parameter '--autolykos2-preload' which enables preloading of the next dataset on Autolykos2/Blocx if GPU has enough free memory. Fixed mining of algorithm 'verushash' on Nicehash. Removed algorithm 'memehash')
|
|
|
|
|
|
tymeksm
|
|
September 30, 2024, 06:33:09 AM |
|
Miners update
- aleo-miner-v3.0.8 (Improved mining performance. Adjusted stratum transport protocol settings, 3.0.8 only supports port 4420)
|
|
|
|
|
|
tymeksm
|
|
October 03, 2024, 09:06:57 AM
Last edit: October 03, 2024, 09:23:06 AM by tymeksm |
|
Miners update
- rqiner-v1.0.11 (implemented EP129 parameter changes)
Miners update
- teamblackminer-v2.27 (33% faster Dag on older nvidia cards evrprogpow, firopow and kawpow. Removed rejected shares on startup for zpool.ca. Exit/restart miner on startup on too many rejects)
|
|
|
|
|
|
paputa
|
|
October 06, 2024, 07:55:38 PM |
|
I've recently installed a 15kW solar energy system at home and am exploring investment opportunities. I'm curious about how user-friendly this system is for beginners, especially for those with little experience.
|
|
|
|
|
|
tymeksm
|
|
Today at 06:46:02 AM |
|
Miners update
- nanominer-v3.9.3 (Added karlsenhashv2. Removed heavyhash-based algorithms: Kaspa, Pyrin, Karlsenv1)
- srbminer-multi-v2.6.7 (Fixed 'low difficulty share' issue on algorithm 'verushash' for CPU mining. Minor bug fixes)
|
|
|
|
|
|
