Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[dvijaydev46]

Getting about 135 S/S on my modded RX480 with 5.0. I was getting about 77-80 with 4.0. No words to praise Claymore.

[dumada]

A workaround for rigs with mixed cards (Polaris and old cards): start two miners with "-di" option, one for Polaris cards and second for other cards. Use "-mport 0" option to disable port for remote management and avoid red message in second miner.
I will fix it soon.

You should also fix the issue I mentioned a few weeks back.
-di does not work properly:
when I write -di 1,2,3 instead of 3 devices I get 0,1,2,3 or 4 cards running!!!

You should not write -di 1,2,3 . You should write -di 123. There should be no commas between the number.

[Selsonblue]

720 s/s - 6x rx480 4gb - 50% increase over v4.0

Claymore is a god, +1 thank you for your continued effort.  

Also, works with ZCL btw. Although due to the network hashrate spike, i dont doubt that this is common knowledge already.

[Tmdz]

A workaround for rigs with mixed cards (Polaris and old cards): start two miners with "-di" option, one for Polaris cards and second for other cards. Use "-mport 0" option to disable port for remote management and avoid red message in second miner.
I will fix it soon.

You should also fix the issue I mentioned a few weeks back.
-di does not work properly:
when I write -di 1,2,3 instead of 3 devices I get 0,1,2,3 or 4 cards running!!!

You should not write -di 1,2,3 . You should write -di 123. There should be no commas between the number.

Common mistake among sa users

[amirheavy666]

I have one R9 390x and one RX 480 but with claymore ver 5.0 just Rx480 work !!

i give this error : (port is busy, use different -mport value)

 
and with claymore 4.0 both of R 390x and R480x works !!!

what i must do

You just use a different port. For example -mport  2345

thanks man , it has been solved with 2 cmd and -mport 2345 for one

[Meech]

Should bounce from here. Very low risk/High Reward trade.

Thank you, bro. I've lost 20% today

After seing his post I went to see the definiton of the bull flag: It's the other way round when the waves are going up, whille the zec waves aregoing down => It should continue falling (probably very fast from here, confidence is gone after support on 130 was lost but I'm not an analyst, just my opinion)

Adaseb is famous for not knowing how to interpret numbers. I remember his screenshot claiming he got something like 8000 Sol/s on his old bone of GPU with some early Genoil miner in the early days after the launch. Therefore good luck with his trading advice.

I wouldn't discredit people for trying to help, they are offering their best opinion.  Your fairly new to the forums.  Maybe you know any advice on the forums is used at your own risk.  If only one of ten suggestions proves to work out consider yourself lucky someone could assist you.

[aaronsace]

I have one R9 390x and one RX 480 but with claymore ver 5.0 just Rx480 work !!

i give this error : (port is busy, use different -mport value)

 
and with claymore 4.0 both of R 390x and R480x works !!!

what i must do

Use -mport 0

[adaseb]

That's the way trading is. Sometimes the setup works... sometimes it doesn't. It was a good risk-reward and with Snowden pumping, it seems like the bulls would enter at the start of the flag and pump it some more... but it didn't happen. Took small loss and moved on.

You can't win 100% of all your trades... thats not the way it works.

The 8000Sol/s was a joke, but I guess its hard to tell sarcasm on a forum with text.

You don't like my posts... then don't read them or better yet... put me on ignore.

[marvykkio]

 
I would not know whether to continue with zcash, switch to classic or revert to eth

[adaseb]

I would not know whether to continue with zcash, switch to classic or revert to eth

RX gpus are about even

Old Gpus are better with ZEC

Use

http://www.whattomine.com/coins

http://www.coinwarz.com/calculators/zcash-mining-calculator

http://www.coinwarz.com/calculators/zclassic-mining-calculator

[snowyNNN]

I would not know whether to continue with zcash, switch to classic or revert to eth

I feel the same.
But mining earnings are still much greater compared to three weeks ago.  

[adaseb]

I would not know whether to continue with zcash, switch to classic or revert to eth

I feel the same.
But mining earnings are still much greater compared to three weeks ago.  

Yeah 50% more profits if you convert to fiat. SO can't complain. ROI was faster for some GPUs.

[Cryptozillah]

On RX rigs ZEC still is the best choice imo due to the lower power usage.

[Cryptozillah]

It looks like ZEC hit the bottom for now

[dygus]

While I mine zcash got about 8% of rejected shares. Anyone knows why?

[adaseb]

It looks like ZEC hit the bottom for now

That 0.17 Daily high that happened a few hours ago was yesterdays low, so if the bulls can break that barrier then maybe ... just maybe it won't make a new all time low later today or tomorrow.

Profits are already becoming close to what ETH was. Those lazy devs need to fix the Z problem first.

[AltcoinScamfinder]

While I mine zcash got about 8% of rejected shares. Anyone knows why?

High latency internet or timing issues?

[Cryptozillah]

It looks like ZEC hit the bottom for now

That 0.17 Daily high that happened a few hours ago was yesterdays low, so if the bulls can break that barrier then maybe ... just maybe it won't make a new all time low later today or tomorrow.

Profits are already becoming close to what ETH was. Those lazy devs need to fix the Z problem first.

Yeah i agree.
ZEC still have advantage by the lower powerdraw though so it could drop some more and still keep up with ETH.

[orbico]

Great miner Claymore! 390 8gb @ 145 each & 480's 4gb @ 125 each with standard clocks. Very happy!

All we need now is a windows wallet, fix the Z-address issues and this coin could be awesome.

[dygus]

While I mine zcash got about 8% of rejected shares. Anyone knows why?

High latency internet or timing issues?

Changed pool from nano to fly. Got rejects as well, but much less