Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[adaseb]

While I mine zcash got about 8% of rejected shares. Anyone knows why?

High latency internet or timing issues?

Changed pool from nano to fly. Got rejects as well, but much less

Are you using Claymore V5? Because the older versions had issues using different "-i" values for different GPUs. They need to be identical or they produce high rejects.

-i 0,1,2,0,1,2
Produces high rejects, change all to a single number.

[1715322074]

1715322074

[1715322074]

1715322074

[iMish]

Should bounce from here. Very low risk/High Reward trade.

http://i64.tinypic.com/8xig5v.png

Thank you, bro. I've lost 20% today

After seing his post I went to see the definiton of the bull flag: It's the other way round when the waves are going up, whille the zec waves aregoing down => It should continue falling (probably very fast from here, confidence is gone after support on 130 was lost but I'm not an analyst, just my opinion)

Adaseb is famous for not knowing how to interpret numbers. I remember his screenshot claiming he got something like 8000 Sol/s on his old bone of GPU with some early Genoil miner in the early days after the launch. Therefore good luck with his trading advice.

I dump any ZEC i mine instantly since the launch, when the price dropped below 0.16 i though to stop selling and place sell orders at 0.19

adaseb's analysis encouraged me to do so and i lost 25% however i dont blame him, 100% success of flag patterns is simply impossible

[delle54]

i though to stop selling and place sell orders at 0.19

Finally someone with a good idea I also raised from 0.17 to 0.19. ATM the chances are not bad to achieve that and if we all hold together...

[ybelevi]

first one of gpu freeze then miner restart after then crush, any ideas?

[adaseb]

Sometimes the bull flags do work beautifully like in Monero, but its never 100% success rate. If it was my Grandma would be trading.

I didn't expect you guys to actually take the trades, was just more of an observation since this isn't a speculation thread.

[Claymore]

In a day I will release new version. More speed. About 200H/s on stock Nano. Hope it will finally stop this crazy speed racing.

[delle54]

first one of gpu freeze then miner restart after then crush, any ideas?

THX for the detailed info about your system. My crystal ball tells me you may have to do the following:

A workaround for rigs with mixed cards (Polaris and old cards): start two miners with "-di" option, one for Polaris cards and second for other cards. Use "-mport 0" option to disable port for remote management and avoid red message in second miner.
I will fix it soon.

[NameTaken]

In a day I will release new version. More speed. About 200H/s on stock Nano. Hope it will finally stop this crazy speed racing.

I'm wondering why the Linux version stopped being released.

[sorry2xs]

In a day I will release new version. More speed. About 200H/s on stock Nano. Hope it will finally stop this crazy speed racing.

have the rx 480s and the r9 390s reached the max.

[delle54]

I'm wondering why the Linux version stopped being released.

Because he doesn't like Linux and can only concentrate really good on one thing at a time. Please respect that and use Silent Army.

[davecoin]

In a day I will release new version. More speed. About 200H/s on stock Nano. Hope it will finally stop this crazy speed racing.

I'm wondering why the Linux version stopped being released.

Large scale miners likely use Linux for ease of setup and use.  Holding back a Linux release helps prevent the rapid deterioration of the price of ZEC (even though they've probably switched to Optiminer anyways).

[ybelevi]

sorry delle54, you are right,
all 4 cards 480 8gb, and useing this command line

setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe -zpool zcl.coinmine.pl:7007 -zwal ybelevi.4801 -zpsw x -allpools 1 -tt 55 -ttli 75 -tstop 83 -fanmax 100 -fanmin 60 -cclock 1280 -mclock 1850 -powlim 0 -colors 1

first one of gpu freeze then miner restart after then crush, any ideas?

THX for the detailed info about your system. My crystal ball tells me you may have to do the following:

A workaround for rigs with mixed cards (Polaris and old cards): start two miners with "-di" option, one for Polaris cards and second for other cards. Use "-mport 0" option to disable port for remote management and avoid red message in second miner.
I will fix it soon.

[delle54]

You maybe overclocking with the wrong settings. Memclock 2200 and Memvoltage 1100 works fine here. ZEC needs different values as ETH.

[A L I E N]

Sometimes the bull flags do work beautifully like in Monero, but its never 100% success rate. If it was my Grandma would be trading.

I didn't expect you guys to actually take the trades, was just more of an observation since this isn't a speculation thread.

Neither of these are bull flags. This one is at least closer since it is in an uptrend (necessary) but actually the real bull flag failed near 0.015 (bearish) and price fell.  Price began to move up again when the established downtrend line was broken to the upside. The ZEC setup was a descending triangle (bearish) which is a continuation pattern not a bull flag at all.  You can't have a bull flag at all time lows but descending triangles occasionally fail and break to the upside but its rather rare.
http://stockcharts.com/school/doku.php?id=chart_school:chart_analysis:chart_patterns:descending_triangle_continuation

[delle54]

have the rx 480s and the r9 390s reached the max.

Don't worry, they will probably get more too.

[xeridea]

In a day I will release new version. More speed. About 200H/s on stock Nano. Hope it will finally stop this crazy speed racing.

I'm wondering why the Linux version stopped being released.

Large scale miners likely use Linux for ease of setup and use.  Holding back a Linux release helps prevent the rapid deterioration of the price of ZEC (even though they've probably switched to Optiminer anyways).

You, and many many many others keep asking, and with similar reasons.  Look through OP, and Claymore's recent posts https://bitcointalk.org/index.php?action=profile;u=306958;sa=showPosts There was drama from Linux users of SA, so he stopped supporting it.  He doesn't like Linux anyway.

[ybelevi]

thanks for the help but same result crash

You maybe overclocking with the wrong settings. Memclock 2200 and Memvoltage 1100 works fine here. ZEC needs different values as ETH.

[delle54]

Try the cards one by one and see what happens.

[AriesIV10]

In a day I will release new version. More speed. About 200H/s on stock Nano. Hope it will finally stop this crazy speed racing.

Thank you for creating such a great program.  I hope that you are profiting well for this, you deserve it after all of the people you are helping mine.  

Thanks Again!

[Sam123]

In a day I will release new version. More speed. About 200H/s on stock Nano. Hope it will finally stop this crazy speed racing.

Thank you for creating such a great program.  I hope that you are profiting well for this, you deserve it after all of the people you are helping mine.  

Thanks Again!

Same here. Thanks