[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[bigjme]

Of course 

[zelante]

got block with 2.50001 reward. i got jackpot from bitquark?

edit:

now got block with 2.50019 BTQ 

[cbuchner1]

got block with 2.50001 reward. i got jackpot from bitquark?

edit:

now got block with 2.50019 BTQ 

it's the transaction fee jackpot.

[cbuchner1]

this is what I am getting on BitQuark. I am running with the "killer groestl", so I might
get 25% more hash than you would (on same hardware)

that's one GTX 780, two GTX 750Ti, one GT 640.

Code:

[2014-05-06 20:07:59] 4 miner threads started, using 'quark' algorithm.
[2014-05-06 20:08:38] accepted: 1/1 (100.00%), 17920 khash/s (yay!!!)
[2014-05-06 20:09:09] accepted: 2/2 (100.00%), 17667 khash/s (yay!!!)

Here's 3 GTX 780Ti

Code:

014-05-06 19:37:55] 3 miner threads started, using 'quark' algorithm.
[2014-05-06 19:46:56] accepted: 1/1 (100.00%), 26374 khash/s (yay!!!)
[2014-05-06 19:53:40] accepted: 2/2 (100.00%), 24807 khash/s (yay!!!)
[2014-05-06 19:55:58] accepted: 3/3 (100.00%), 26010 khash/s (yay!!!)
[2014-05-06 19:59:32] accepted: 4/4 (100.00%), 25436 khash/s (yay!!!)

For completeness sake, here's 3 ASUS ROG MARS cards (6 GTX 760 cores)

Code:

[2014-05-06 20:26:49] 6 miner threads started, using 'quark' algorithm.
[2014-05-06 20:33:42] accepted: 1/1 (100.00%), 19953 khash/s (yay!!!)
[2014-05-06 20:43:13] accepted: 2/2 (100.00%), 19499 khash/s (yay!!!)

OMG what did we do

Code:

"difficulty" : 731.52474705,

[bigjme]

Diff has over doubled haha
The trouble we cause

[mmmaybe]

BTQ diff is over 600 already, and solomining is still worth it?

I don't think so, but it would be good to know where all the nvidia crowd was before and move to that coin 

I am trying http://btq.ext-pool.net - working fine so far, have received the eq. of 1.5 block in approx. 30 min. of mining

[abv]

Hello all. I've been using cudaminer for my 750tis but wanted to give JPC a try so this is my first time using ccminer. I've done a good bit of reading on this forum and the commands look close enough to cudaminer that I should be able to figure it out but I can't quite get it to work properly and definitely need some help at this point.

Basically, the .bat file seems to run fine except it only gives me a new "Stratum detected new block" every minute or so. No hash information, no hash acceptance confirmation. I checked the dashboard on miningpoolhub.com and there's definitely no shares being counted.

I'm using the v0.7 release from a few days ago. Here's my .bat file (my username and such is filled in properly in the real one):

ccminer50.exe -a jackpot -d 0 -o stratum+tcp://us-east1.jackpotcoin.miningpoolhub.com:20484 -O username.worker:password

Any ideas?

if you get stratum detected new block, I'd say you are running cgminer not ccminer (or I missed an option)

Unfortunately it's nothing that obvious as I'm definitely using ccMiner v0.7, but I checked anyways. However, your comment did make me compare how they each start up and I can say that they basically start the same.

After starting either program they both say "Stratum detected new block" but cudaminer would immediately initialize GPU #0 and go on from there. The ccMiner program just waits about a minute and throws out the same "Stratum detected new block," doing so endlessly.

Is there some other command I need to apply to get ccMiner to initialize my GPU?

I really don't have anything like that from ccminer...
it says:
1miner threads started... etc...
Starting stratum on stratum...etc... and it start hashing (but I am using -q).

In cgminer "stratum detected new block" just means a block has been found somewhere on the network and the miner is trying to solve the new one...

edit: ok, if cudaminer doesn't start, try to restart.
Which card are you using/ which version of cc/cuda are you using ?
What is happening on gpu usage/ core clock etc... when you start the miner ?

Here's what happens within seconds of loading a cudaminer .bat file:
https://i.imgur.com/2nls6Ib.png

Here's what happens after a few minutes of loading a ccminer .bat file
https://i.imgur.com/0lO9qml.png

Cudaminer is version 2014-02-09, ccMiner is v0.7 using the ccMiner50.exe. I'll have to wait until I get home later to see what GPU-Z says about GPU usage/core clock info.

[bitcoinvideos]

I can barely even get a thread accepted over at btq.ext-pool.net....

[THeZoiD]

got block with 2.50001 reward. i got jackpot from bitquark?

edit:

now got block with 2.50019 BTQ 

lmaol...i think i had that one...same amount but it got orphened...

look like you beat me on that one

[restless]

complete readme for latest ccminer is terribly needed
is there support for failover pools?

[cbuchner1]

complete readme for latest ccminer is terribly needed
is there support for failover pools?

no failover. there's feature parity with pooler's cpuminer - that is about it.

ccminer has a focus on adding interesting (lucrative?) algorithms quickly. Anything else is secondary at the moment.

[Breadpudding]

I had the same problem, now I'm over at https://cpu-pool.net/btq/ and able to submit a lot more 

I can barely even get a thread accepted over at btq.ext-pool.net....

[AizenSou]

got block with 2.50001 reward. i got jackpot from bitquark?

edit:

now got block with 2.50019 BTQ 

lmaol...i think i had that one...same amount but it got orphened...

look like you beat me on that one

That coin is so tiny. Hashrate has tripled only because of a handful of nVidia miners like us. Maybe we can't sell it at all but I will give it a try. Time to report:
GTX780: 7Mhs
GTX680: 3.8Mhs
750ti: 3Mhs

Thanks again Christian. Since you dominated this coin since the beginning like Fugue. Your holding is much bigger than me, I don't donate my BTC anymore 

[djm34]

I had the same problem, now I'm over at https://cpu-pool.net/btq/ and able to submit a lot more  

I can barely even get a thread accepted over at btq.ext-pool.net....

careful though you might get banned without any payment... I think that pool was doing this on qubitcoin when the first gpu miner were out (lost around 1000qubit... )
by the way, do you have qubit in the queue with ccminer (not worth a lot though, but could very well resurface, also used for myriad)

[djm34]

got block with 2.50001 reward. i got jackpot from bitquark?

edit:

now got block with 2.50019 BTQ  

lmaol...i think i had that one...same amount but it got orphened...

look like you beat me on that one

That coin is so tiny. Hashrate has tripled only because of a handful of nVidia miners like us. Maybe we can't sell it at all but I will give it a try. Time to report:
GTX780: 7Mhs
GTX680: 3.8Mhs
750ti: 3Mhs

Thanks again Christian. Since you dominated this coin since the beginning like Fugue. Your holding is much bigger than me, I don't donate my BTC anymore  

if all the nvdia move back now, the coin dies out of reach of cpu's  

[residnt]

This is great.  Finally I'm able to mine quark.  Found 3 blocks already running on my lonely 770 gtx at 3600 khash/s.  Now hopefully X11 is next

Awesome work thank you
residnt

[bitcoinvideos]

I had the same problem, now I'm over at https://cpu-pool.net/btq/ and able to submit a lot more 

I can barely even get a thread accepted over at btq.ext-pool.net....

careful though you might get banned without any payment... I think that pool was doing this on qubitcoin when the first gpu miner were out (lost around 1000qubit... )
by the way, do you have qubit in the queue with ccminer (not worth a lot though, but could very well resurface, also used for myriad)

I tried the CPU miner pool and it sucked big time. Super slow and issues logging in etc. Went back to EXT and will take my 3 shares per 4 minutes...

[Breadpudding]

Oh bummer sorry about your loss 

Does your message mean that I should put in my payment (wallet) address?

I had the same problem, now I'm over at https://cpu-pool.net/btq/ and able to submit a lot more  

I can barely even get a thread accepted over at btq.ext-pool.net....

careful though you might get banned without any payment... I think that pool was doing this on qubitcoin when the first gpu miner were out (lost around 1000qubit... )
by the way, do you have qubit in the queue with ccminer (not worth a lot though, but could very well resurface, also used for myriad)

[nomad1109]

Code:

[2014-05-06 14:09:16] 6 miner threads started, using 'quark' algorithm.
[2014-05-06 14:09:16] Binding thread 0 to cpu 0
[2014-05-06 14:09:16] Binding thread 2 to cpu 2
[2014-05-06 14:09:16] Binding thread 1 to cpu 1
[2014-05-06 14:09:16] Binding thread 5 to cpu 5
[2014-05-06 14:09:16] Binding thread 3 to cpu 3
[2014-05-06 14:09:16] Binding thread 4 to cpu 4
[2014-05-06 14:09:16] HTTP request failed: Empty reply from server
[2014-05-06 14:09:16] json_rpc_call failed, retry after 30 seconds

I am getting this HTTP error trying to set up bitquark mining....

Anyone have an example of the config they are using to solo mine?

I fed in...

ccminer.exe -a quark -o localhost:9596 -u user -p pass -s 1

Am I missing something? Thanks in advance.

[djm34]

Code:

[2014-05-06 14:09:16] 6 miner threads started, using 'quark' algorithm.
[2014-05-06 14:09:16] Binding thread 0 to cpu 0
[2014-05-06 14:09:16] Binding thread 2 to cpu 2
[2014-05-06 14:09:16] Binding thread 1 to cpu 1
[2014-05-06 14:09:16] Binding thread 5 to cpu 5
[2014-05-06 14:09:16] Binding thread 3 to cpu 3
[2014-05-06 14:09:16] Binding thread 4 to cpu 4
[2014-05-06 14:09:16] HTTP request failed: Empty reply from server
[2014-05-06 14:09:16] json_rpc_call failed, retry after 30 seconds

I am getting this HTTP error trying to set up bitquark mining....

Anyone have an example of the config they are using to solo mine?

I fed in...

ccminer.exe -a quark -o localhost:9596 -u user -p pass -s 1

Am I missing something? Thanks in advance.

most likely a problem with the conf file your the coin you are mining
did you put server=1 in it ? (or wrong rpcport)