[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[djm34]

anybody has looked into diamondcoin DMD (must be the first coin I solomine when I started) ? Apparently it has been changed to groestl (is it the same groeslt as groestlcoin or again something like myriad-groestl ?)
The exchange rate seems pretty high.

[DougB62]

Wanted to try BitQuark, wallet does not sync, no connections to the network...
Did I miss something?

Code:

bitquark.conf

rpcuser=bitquark
rpcpassword=password
rpcallowip=127.0.0.1
rpcallowip=192.168.*.*
rpcport=9108
port=9596
addnode=112.111.83.244:12256
addnode=103.24.88.5:50264
addnode=196.210.132.241:9596
addnode=220.166.171.10:9115
addnode=76.108.164.127:57864
addnode=81.154.205.63:55289
addnode=203.156.196.226:61682
addnode=69.8.51.75:35542
addnode=5.9.248.182:60084
addnode=124.234.48.148:14129
gen=0
server=1
listen=1
mintxfee=0.00001                     <<<<- MUST ADD
mintxrelayfee=0.00000000          <<<<- MUST ADD

* You MUST open port 9596 on your router/firewall to allow connect to the BitQuark network!

More Nodes

125.70.106.2:9596
91.67.71.178:9596
42.239.119.231:9596
64.53.248.79:9596
118.112.122.146:9596
98.119.203.187:9596
46.119.119.40:9596
114.66.195.170:9596
58.47.58.15:9596
62.210.123.27:9596
182.91.54.125:9596
122.192.218.120:9596
178.49.193.142:9596
174.107.145.6:9596
115.28.161.67:9596
210.195.183.143:9596
123.161.55.60:9596

Yeah I got that, though I am not allowing incoming connections through my router, it's not needed for any other coin either.

Same problem here.

EDIT: Nevermind - After about twenty minutes of just sitting there w no connections, it mysteriously started syncing.

[bitcoinvideos]

Wanted to try BitQuark, wallet does not sync, no connections to the network...
Did I miss something?

Code:

bitquark.conf

rpcuser=bitquark
rpcpassword=password
rpcallowip=127.0.0.1
rpcallowip=192.168.*.*
rpcport=9108
port=9596
addnode=112.111.83.244:12256
addnode=103.24.88.5:50264
addnode=196.210.132.241:9596
addnode=220.166.171.10:9115
addnode=76.108.164.127:57864
addnode=81.154.205.63:55289
addnode=203.156.196.226:61682
addnode=69.8.51.75:35542
addnode=5.9.248.182:60084
addnode=124.234.48.148:14129
gen=0
server=1
listen=1
mintxfee=0.00001                     <<<<- MUST ADD
mintxrelayfee=0.00000000          <<<<- MUST ADD

* You MUST open port 9596 on your router/firewall to allow connect to the BitQuark network!

More Nodes

125.70.106.2:9596
91.67.71.178:9596
42.239.119.231:9596
64.53.248.79:9596
118.112.122.146:9596
98.119.203.187:9596
46.119.119.40:9596
114.66.195.170:9596
58.47.58.15:9596
62.210.123.27:9596
182.91.54.125:9596
122.192.218.120:9596
178.49.193.142:9596
174.107.145.6:9596
115.28.161.67:9596
210.195.183.143:9596
123.161.55.60:9596

Yeah I got that, though I am not allowing incoming connections through my router, it's not needed for any other coin either.

Same problem here.

I had to open my port for it to work.

[ZeroFossilFuel]

I'd like to try ccminer with BTQ also but I'm having trouble compiling it for Xubuntu 12.04 with nVidia 9600 GT (compute capability of 1.0) or another machine running Xubuntu 13.10 with a GT 220 (cc 1.2). On the first machine it crashes on make with a gencode 30 unsupported error. On the 2nd machine it gets as far as

Running pass 'Live Variable Analysis' on function '@_Z24myriadgroestl_gpu_sha256Pj'
Segmentation fault (core dumped)
make[2]: *** [cuda_myriadgroestl.o] Error 139
make[2]: Leaving directory `/home/[username]/ccminer-master'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/[username]/ccminer-master'
make: *** [all] Error 2

I know that even if I do get it running with these older video cards it will be slow but I'm just trying to test the waters. If I were to just buy better video hardware might that solve the problems or might there be other factors limiting me as well? All help appreciated.

[abv]

I was hoping the new Windows compile would change things but it hasn't. I suppose my computer might be the only one in the world having this problem, but ccMiner will not mine JPC for me. I really hope this doesn't extend to the other algos. Anyways, if either of the Christians feels like investigating this possible bug further I'll be glad to help in any way I can. Here's everything I can think to provide.

Batch code:
https://i.imgur.com/xxnPWCi.png

Batch output:
https://i.imgur.com/ZgNyjfb.png

GPU-Z:
https://i.imgur.com/Loi4Gsu.png
 

Thing's I've tried:
Using each card individually (-d 0, -d 1, -d 2)
Using no -d (sets threads 0, 1, and 2 to CPU)
Used different pools
Other versions of ccMiner (v0.7 ccminer50.exe, v0.7 ccminer35.exe)

I'm using 3 of the EVGA SCs (02G-P4-3753-KR) if it matters somehow. I don't what else to say. Thanks for any help.

[noobminerd]

Anyone could tell the quark hasrate forn an  individual card? I have 3000 with a 670 it's normal?

[ivanlabrie]

Stock 750 ti 2gb = 2800kh/s (qrk algo)

Nice!

[noobminerd]

that means that 780ti it's a beast

[noobminerd]

ccMiner for nVidia cards has happened. That is all. Just a friendly takeover of the hash rate Wink

that's one GTX 780, two GTX 750Ti, one GT 640.
Code:
[2014-05-06 20:07:59] 4 miner threads started, using 'quark' algorithm.
[2014-05-06 20:08:38] accepted: 1/1 (100.00%), 17920 khash/s (yay!!!)
[2014-05-06 20:09:09] accepted: 2/2 (100.00%), 17667 khash/s (yay!!!)

Here's 3 GTX 780Ti
Code:
014-05-06 19:37:55] 3 miner threads started, using 'quark' algorithm.
[2014-05-06 19:46:56] accepted: 1/1 (100.00%), 26374 khash/s (yay!!!)
[2014-05-06 19:53:40] accepted: 2/2 (100.00%), 24807 khash/s (yay!!!)
[2014-05-06 19:55:58] accepted: 3/3 (100.00%), 26010 khash/s (yay!!!)
[2014-05-06 19:59:32] accepted: 4/4 (100.00%), 25436 khash/s (yay!!!)

For completeness sake, here's 3 ASUS ROG MARS cards (6 GTX 760 cores)
Code:
[2014-05-06 20:26:49] 6 miner threads started, using 'quark' algorithm.
[2014-05-06 20:33:42] accepted: 1/1 (100.00%), 19953 khash/s (yay!!!)

[nomad1109]

I will mine for 6 hours total and split it for you three equally.

Appreciate all the help, and already hit the first block... so you are all on the way to being wildly rich in the next few hours.

[2014-05-06 15:00:59] 6 miner threads started, using 'quark' algorithm.
[2014-05-06 15:04:36] accepted: 1/1 (100.00%), 16039 khash/s (yay!!!)
[2014-05-06 15:13:00] accepted: 2/2 (100.00%), 14439 khash/s (yay!!!)
[2014-05-06 15:21:38] accepted: 3/3 (100.00%), 16043 khash/s (yay!!!)
[2014-05-06 15:27:15] accepted: 4/4 (100.00%), 16548 khash/s (yay!!!)
[2014-05-06 15:32:41] accepted: 5/5 (100.00%), 15218 khash/s (yay!!!)
[2014-05-06 15:37:10] accepted: 6/6 (100.00%), 16538 khash/s (yay!!!)
[2014-05-06 15:47:40] accepted: 7/7 (100.00%), 16172 khash/s (yay!!!)
[2014-05-06 16:03:49] accepted: 8/8 (100.00%), 16831 khash/s (yay!!!)
[2014-05-06 16:07:01] accepted: 9/9 (100.00%), 15173 khash/s (yay!!!)
[2014-05-06 16:37:46] accepted: 10/10 (100.00%), 16767 khash/s (yay!!!)
[2014-05-06 16:46:03] accepted: 11/11 (100.00%), 16265 khash/s (yay!!!)
[2014-05-06 16:56:24] accepted: 12/12 (100.00%), 14611 khash/s (yay!!!)
[2014-05-06 16:56:29] accepted: 13/13 (100.00%), 16570 khash/s (yay!!!)
[2014-05-06 17:06:27] accepted: 14/14 (100.00%), 16861 khash/s (yay!!!)
[2014-05-06 17:29:24] accepted: 15/15 (100.00%), 14943 khash/s (yay!!!)
[2014-05-06 17:34:22] accepted: 16/16 (100.00%), 16208 khash/s (yay!!!)
[2014-05-06 17:49:43] accepted: 17/17 (100.00%), 15684 khash/s (yay!!!)
[2014-05-06 17:57:31] accepted: 18/18 (100.00%), 13919 khash/s (yay!!!)
[2014-05-06 17:59:36] accepted: 19/19 (100.00%), 15833 khash/s (yay!!!)
[2014-05-06 18:04:19] accepted: 20/20 (100.00%), 16635 khash/s (yay!!!)
[2014-05-06 19:11:18] accepted: 21/21 (100.00%), 16353 khash/s (yay!!!)
[2014-05-06 19:14:38] accepted: 22/22 (100.00%), 16775 khash/s (yay!!!)
[2014-05-06 19:16:50] accepted: 23/23 (100.00%), 14537 khash/s (yay!!!)
[2014-05-06 19:35:57] accepted: 24/24 (100.00%), 14734 khash/s (yay!!!)
[2014-05-06 19:36:18] accepted: 25/25 (100.00%), 16135 khash/s (yay!!!)
[2014-05-06 19:37:21] accepted: 26/26 (100.00%), 15654 khash/s (yay!!!)
[2014-05-06 19:39:33] accepted: 27/27 (100.00%), 16334 khash/s (yay!!!)
[2014-05-06 19:47:33] accepted: 28/28 (100.00%), 14960 khash/s (yay!!!)
[2014-05-06 19:54:44] accepted: 29/29 (100.00%), 16814 khash/s (yay!!!)
[2014-05-06 19:57:28] accepted: 30/30 (100.00%), 15415 khash/s (yay!!!)
[2014-05-06 19:59:34] accepted: 31/31 (100.00%), 15480 khash/s (yay!!!)
[2014-05-06 20:11:27] accepted: 32/32 (100.00%), 15495 khash/s (yay!!!)
[2014-05-06 20:12:31] accepted: 33/33 (100.00%), 16203 khash/s (yay!!!)
[2014-05-06 20:15:39] accepted: 34/34 (100.00%), 17173 khash/s (yay!!!)
[2014-05-06 20:21:37] accepted: 35/35 (100.00%), 16015 khash/s (yay!!!)
[2014-05-06 20:41:12] accepted: 36/36 (100.00%), 16692 khash/s (yay!!!)

+ one found block before I turned on quiet mode....

so 37 blocks = 92.5 BTQ

divided by 3 = 30.833 BTQ each.

Thanks again for all your help today.

bigjme - BTQ: 15A8n3YoP6DEMNY1CN63iKYUJtfCXaftLV (sent)
djm34 - BTQ: 1PtXfzx45Uz75j3X59kUnDpqHmaPUoPUq7 (sent)
breadpudding - BTQ: 15Xw3n3yNijHrZRaEQkNn62Zvc4cCQw4ed (sent)

[RavenX]

Securecoin(Quark algo) mining with a single GTX750Ti and ccminer50.exe v0.9 (around 3MHs):



MEM OC does not provide significant improvements and usually crashes ccminer.
TDP varies a lot.

Also tried BitQuark, but that f... wallet doesn't sync... and I'm not changing my PC/router's config just because of a coin.

[xojex]

anyone merge mining Vert, Monocle and Parallax at the same time?

[Breadpudding]

Thanks so much nomad! appreciate it

bigjme I've mined 4 blocks of solo mining BTQ so far, sending those to as a thank you for helping me with my setup

I will mine for 6 hours total and split it for you three equally.

Appreciate all the help, and already hit the first block... so you are all on the way to being wildly rich in the next few hours.

so 37 blocks = 92.5 BTQ

divided by 3 = 30.833 BTQ each.

Thanks again for all your help today.

bigjme - BTQ: 15A8n3YoP6DEMNY1CN63iKYUJtfCXaftLV (sent)
djm34 - BTQ: 1PtXfzx45Uz75j3X59kUnDpqHmaPUoPUq7 (sent)
breadpudding - BTQ: 15Xw3n3yNijHrZRaEQkNn62Zvc4cCQw4ed (sent)

[Breadpudding]

Abv,

Still need help on getting setup on JPC? I have the same card, EVGA 750ti superclocked. Maybe try the newest ccminer 0.90 and then the 3.0 & 3.5 compiled versions, they usually run the fastest for me.  I haven't tried that pool you were trying, but I can if you still need help. I've been solo mining JPC most recently but have also pool mined on MiningPoolhub & on Cloudminers.

BP

I was hoping the new Windows compile would change things but it hasn't. I suppose my computer might be the only one in the world having this problem, but ccMiner will not mine JPC for me. I really hope this doesn't extend to the other algos. Anyways, if either of the Christians feels like investigating this possible bug further I'll be glad to help in any way I can. Here's everything I can think to provide.


Thing's I've tried:
Using each card individually (-d 0, -d 1, -d 2)
Using no -d (sets threads 0, 1, and 2 to CPU)
Used different pools
Other versions of ccMiner (v0.7 ccminer50.exe, v0.7 ccminer35.exe)

I'm using 3 of the EVGA SCs (02G-P4-3753-KR) if it matters somehow. I don't what else to say. Thanks for any help.

[abv]

Abv,

Still need help on getting setup on JPC? I have the same card, EVGA 750ti superclocked. Maybe try the newest ccminer 0.90 and then the 3.0 & 3.5 compiled versions, they usually run the fastest for me.  I haven't tried that pool you were trying, but I can if you still need help. I've been solo mining JPC most recently but have also pool mined on MiningPoolhub & on Cloudminers.

BP

I was hoping the new Windows compile would change things but it hasn't. I suppose my computer might be the only one in the world having this problem, but ccMiner will not mine JPC for me. I really hope this doesn't extend to the other algos. Anyways, if either of the Christians feels like investigating this possible bug further I'll be glad to help in any way I can. Here's everything I can think to provide.


Thing's I've tried:
Using each card individually (-d 0, -d 1, -d 2)
Using no -d (sets threads 0, 1, and 2 to CPU)
Used different pools
Other versions of ccMiner (v0.7 ccminer50.exe, v0.7 ccminer35.exe)

I'm using 3 of the EVGA SCs (02G-P4-3753-KR) if it matters somehow. I don't what else to say. Thanks for any help.

OMG OMG OMG I found the problem.

I googled "ccminer won't start" and soon found my way to a page that said:

"if you are getting errors when running about missing Dll file you may need to download and install Visual C++ Redistributable for Visual Studio 2012"

Well, I didn't get any errors but I tried it anyways. Boom. Done. Working great!

Thanks to all for trying to guide me through this! And maybe make this requirement/solution more prominent on the front page? Oh I'm so relieved...

[Breadpudding]

abv,
Grats on figuring it out .

I did try C&C's latest ccminer 0.9 on that JPC vert pool, and I was getting a range of hashes of course, but on the top end I was getting around 3950khs. I got around the same speeds using all of the included versions. 3.0, 3.5 (other & maxwell).  My oc settings are (+89, +500)

[restless]

Why are people so excited about  BitQuark? Currently mining it with 750Ti is not worth the effort :!

[bigjme]

Thanks for all the donations everyone! Their greatly appreciated

[residnt]

Ok this is strange.  I'm solo mining jackpot at the moment, and I've found one block so far at 4200khash/s.  Now the weird part is i'm getting some random finds in my wallet for odd amounts from 21 jcp to 34 jpc.  Does anyone know where this is coming from.  the address on the bottom of the transaction is (n/a).  Still trying to figure out what to mine.

thanks
residnt

[Legionnairez]

Ok this is strange.  I'm solo mining jackpot at the moment, and I've found one block so far at 4200khash/s.  Now the weird part is i'm getting some random finds in my wallet for odd amounts from 21 jcp to 34 jpc.  Does anyone know where this is coming from.  the address on the bottom of the transaction is (n/a).  Still trying to figure out what to mine.

thanks
residnt

I believe those are the stakes you are receiving.