bigjme
|
|
May 13, 2014, 03:54:52 PM |
|
I often find it crashes after the 8th set of results. Its very strange. These are with stock clocks, and overclocks. I even tried the config i used before for yac and that doesnt work. I miss linux
|
Owner of: cudamining.co.uk
|
|
|
wzorak
Newbie
Offline
Activity: 1
Merit: 0
|
|
May 13, 2014, 03:56:57 PM |
|
Hi Bombadil! i sent you a pm, i have a gtx560 hashing at 1mh/s thanks for your compatible compute 2.1 compile I should be able to use the ccminer35.exe with a GTX 670 (well two of them actually), right?
When I try I get a much higher hashrate, but I never get any accepted shares. Anyone else have similar issues?
Check the real compute capability of your GTX670 here: https://developer.nvidia.com/cuda-gpus
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
May 13, 2014, 04:09:19 PM |
|
cudaminer.exe -s 10 --algo=scrypt-jane:YAC -i 0 -C 0 -b 4096 -L 2 -m 1 -H 2 This worked the best for my 5 x 750ti. Got to 3.6kh/s with some OC. I got maybe 0,1kh/s from the autotune, I saw someone claiming he got more but usually 3.5kh/s is pretty much the normal. Using cudaminer 02-28 x86. you need to increase the -L value, I remember, I have getting the best performance with 5~6 on my 780ti
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
May 13, 2014, 04:19:08 PM Last edit: May 13, 2014, 04:45:02 PM by djm34 |
|
new X11 coin tonight at 6pm EST (still didn't understand when it starts in utc or cest, but it should be around midnight cest) https://bitcointalk.org/index.php?topic=607493.0
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Samuray
|
|
May 13, 2014, 05:13:29 PM |
|
Poena try adding T5x12 to your bat file. I had some nice hashrates with my 750 ti s in scrypt-jane with Nfactor 11.
|
|
|
|
noobminerd
Member
Offline
Activity: 61
Merit: 10
|
|
May 13, 2014, 06:15:40 PM |
|
Would be very useful compile all information possible about cudaminer & ccminer per card model and algo and tested configs like litecoin hardware wiki.
|
|
|
|
DougB62
|
|
May 13, 2014, 06:30:02 PM |
|
Would be very useful compile all information possible about cudaminer & ccminer per card model and algo and tested configs like litecoin hardware wiki.
Yeah - that'd be great... SO - when can we expect you to put that out? lol!
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
May 13, 2014, 06:41:25 PM |
|
Would be very useful compile all information possible about cudaminer & ccminer per card model and algo and tested configs like litecoin hardware wiki.
regarding cudaminer this already exists look at the OP and bathrobehero (the author) was searching so times ago someone to take over what he had started
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Jodlar
Newbie
Offline
Activity: 31
Merit: 0
|
|
May 13, 2014, 07:40:11 PM |
|
I tried my MSI GTX 760 and I only got 1750 kh/s Anyone got any better results with this one? I used these settings: ccminer30.exe -a x11 -d gtx760 -o stratum+tcp://... -u -p (btw, on ccminer35 and ccminer50 it didn't work)
|
|
|
|
sobad
Member
Offline
Activity: 77
Merit: 10
|
|
May 13, 2014, 08:02:38 PM |
|
From time to time I get this mesage in ccminer: GPU #0: result for nonce $01A80409 does not validate on CPU!
What does this mean? Something wrong with GPU#0 or with CPU?
|
|
|
|
|
Lizzardis
Newbie
Offline
Activity: 106
Merit: 0
|
|
May 13, 2014, 09:15:45 PM |
|
I was wondering if anyone could help me a bit.. I've recently got myself a KFA2 GeForce GTX 750Ti OC 2GB and I've overclocked it. It used to get about ~300Kh/s, but then I kept getting cudaminer error 30, so I underclocked back down to about ~260Kh/s. Can anybody at least explain why I'm getting the error, or at least recommend some settings for my overclock? And along side that, can you recommend any adjustments to my .bat file, because for some reason, now it's not opening setx GPU_MAX_ALLOC_PERCENT 100 cudaminer.exe -o stratum+tcp://useast.blackcoinpool.com:1111 -u Lizzardis.1 -p <Password> -i 0 -l T5x24 -C 1
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
May 13, 2014, 09:29:23 PM |
|
I was wondering if anyone could help me a bit.. I've recently got myself a KFA2 GeForce GTX 750Ti OC 2GB and I've overclocked it. It used to get about ~300Kh/s, but then I kept getting cudaminer error 30, so I underclocked back down to about ~260Kh/s. Can anybody at least explain why I'm getting the error, or at least recommend some settings for my overclock? And along side that, can you recommend any adjustments to my .bat file, because for some reason, now it's not opening setx GPU_MAX_ALLOC_PERCENT 100 cudaminer.exe -o stratum+tcp://useast.blackcoinpool.com:1111 -u Lizzardis.1 -p <Password> -i 0 -l T5x24 -C 1 setting are independent of the overclock (at least never saw any effect) btw : setx GPU_MAX_ALLOC_PERCENT 100 is not use with cc/cudaminer
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
May 13, 2014, 09:32:38 PM |
|
not really curious, you are... there is a bat file in the release and there isn't any x64 directory
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Lizzardis
Newbie
Offline
Activity: 106
Merit: 0
|
|
May 13, 2014, 09:41:31 PM |
|
I was wondering if anyone could help me a bit.. I've recently got myself a KFA2 GeForce GTX 750Ti OC 2GB and I've overclocked it. It used to get about ~300Kh/s, but then I kept getting cudaminer error 30, so I underclocked back down to about ~260Kh/s. Can anybody at least explain why I'm getting the error, or at least recommend some settings for my overclock? And along side that, can you recommend any adjustments to my .bat file, because for some reason, now it's not opening setx GPU_MAX_ALLOC_PERCENT 100 cudaminer.exe -o stratum+tcp://useast.blackcoinpool.com:1111 -u Lizzardis.1 -p <Password> -i 0 -l T5x24 -C 1 setting are independent of the overclock (at least never saw any effect) btw : setx GPU_MAX_ALLOC_PERCENT 100 is not use with cc/cudaminer Right, well I've got rid of the setx GPU command, thank you for that! But is that .bat sufficient? I mean.. It's still not opening..
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
May 13, 2014, 09:49:31 PM |
|
I was wondering if anyone could help me a bit.. I've recently got myself a KFA2 GeForce GTX 750Ti OC 2GB and I've overclocked it. It used to get about ~300Kh/s, but then I kept getting cudaminer error 30, so I underclocked back down to about ~260Kh/s. Can anybody at least explain why I'm getting the error, or at least recommend some settings for my overclock? And along side that, can you recommend any adjustments to my .bat file, because for some reason, now it's not opening setx GPU_MAX_ALLOC_PERCENT 100 cudaminer.exe -o stratum+tcp://useast.blackcoinpool.com:1111 -u Lizzardis.1 -p <Password> -i 0 -l T5x24 -C 1 setting are independent of the overclock (at least never saw any effect) btw : setx GPU_MAX_ALLOC_PERCENT 100 is not use with cc/cudaminer Right, well I've got rid of the setx GPU command, thank you for that! But is that .bat sufficient? I mean.. It's still not opening.. what kind of error do you have ? may-be adding "-a scrypt" will help also in cudaminer it is -O username.worker:password instead of -u and -p (however I think it should work ?)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
May 13, 2014, 09:50:47 PM |
|
not really curious, you are... there is a bat file in the release and there isn't any x64 directory man.... ok now dll file...is missing download the official release from the OP, everything needed is already there.
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
ZeroFossilFuel
|
|
May 13, 2014, 10:08:12 PM |
|
I'm seeing posts discussing command line options like -L. -H and others that I cannot find in any of the docs and do not see when I do a ./ccminer -h. Are these windows specific options? or is there a more complete list of options somewhere else?
|
|
|
|
ivanlabrie
|
|
May 13, 2014, 10:15:31 PM |
|
ccminer is really basic, those are cudaminer flags...
And guys, don't get nervous, it's not that complicated. If it doesn't work try x86 or x64 binaries, you need a few dll's and the visual studio runtimes and maybe .net framework stuff for win. Not the end of the world!
|
|
|
|
Lizzardis
Newbie
Offline
Activity: 106
Merit: 0
|
|
May 13, 2014, 10:17:22 PM |
|
Right, well I've got rid of the setx GPU command, thank you for that!
But is that .bat sufficient? I mean.. It's still not opening..
what kind of error do you have ? may-be adding "-a scrypt" will help also in cudaminer it is -O username.worker:password instead of -u and -p (however I think it should work ?) It's quite hard to really see.. I double click my .bat and the cmd window opens then closes within a matter of a second! I added -a scrypt and changed it to username.worker:password and it still is doing the same as above. It's always used -u and -p
|
|
|
|
|