|
JuanHungLo
|
 |
January 14, 2017, 12:32:26 PM |
|
I have that same card but only with BFR memory, so my advice is a guess, but yes, what you wrote is what I would try first. Keep in mind that it is a risk. My advice has no guarantee and you might brick your card. Since that card has no second BIOS, it is a risk that you have to decide upon. I personally would try it, but then again I know how to jumper a BIOS physically and boot into program mode and reset it using a USB windows 98 boot to DOS. Good luck.
i flash the bios ,,when ming start the pc get the bluescreen,, so it can not work with that edit Okay, that was the natural thing to attempt. Next try this: For each of the strings that begin with F0 49 02, (AFTER the next characters that are 01, or 02, or 03) replace with the following: 7771332000000000CECD5939805511112E1589080048C60022339D086C0014206A8900A00200312 0140F262B88252F15 That is the string from my XFX 280x Hynix AFR modded. Of course, after editing, reopen the file with VBE7.0.0.7b.exe to correct the invalid checksum. Run the miner at 1000/1500 1150vddc first until it proves stable then you can likely set it at 1050/1500 1125 vddc. |
Bull markets are born on pessimism, grow on skepticism, mature on optimism, and die on euphoria. - John Templeton
|
|
|
zigun
Newbie
 Offline
Activity: 21
Merit: 0
|
|
January 20, 2017, 08:12:01 PM |
|
Hello, everyone! I have ASUS DCUII Top 1070/1600 with BIOS 015.041.000.000.000000 memory is H5GQ2H24AFR I've founded my straps. But as u can see last value for all straps is 0 not 1 as in 1st post. 40 9C 00 00 33 31 33 20 00 00 00 00 84 94 22 10 F0 54 09 06 0F 0B A2 01 00 23 80 00 22 AA 1C 00 12 01 14 20 8A 88 00 A0 00 00 01 20 06 05 0B 0C 11 0C 10 0D
80 38 01 00 55 51 33 20 00 00 00 00 E7 AC 35 20 50 55 0B 0D 1A 97 34 03 00 24 81 00 22 AA 1C 00 4B 06 14 20 9A 88 00 A0 00 00 01 20 0C 08 15 19 21 18 1B 11
90 5F 01 00 55 51 33 20 00 00 00 00 29 31 46 24 50 55 0C 0D 1C 18 A5 03 00 26 A1 00 22 AA 1C 00 4B 07 14 20 9A 88 00 A0 00 00 01 20 0D 0A 18 1B 25 19 1D 11
A0 86 01 00 55 51 33 20 00 00 00 00 29 B5 46 27 50 55 0C 0D 1E 99 05 04 00 26 A2 00 22 AA 1C 00 4B 08 14 20 AA 88 00 A0 00 00 01 20 0E 0A 1A 1E 28 1A 1F 11
74 B7 01 00 55 51 33 20 00 00 00 00 6B BD 57 2D 60 55 0D 0E 22 9C 96 04 00 28 C3 00 22 BB 1C 00 53 0A 14 20 BA 88 00 A0 00 00 01 20 10 0C 1E 22 2E 1D 23 12
48 E8 01 00 77 71 33 20 00 00 00 00 8C C5 58 31 60 55 0F 0F 25 1E 17 05 00 48 C4 00 22 CC 1C 00 5C 0B 14 20 4A 89 00 A0 00 00 01 20 12 0D 20 25 32 1F 26 13
1C 19 02 00 77 71 33 20 00 00 00 00 AD CD 69 37 70 55 0F 10 29 21 98 05 00 4A E5 00 22 EE 1C 00 64 0D 14 20 5A 89 00 A0 00 00 01 20 14 0E 24 2A 38 22 2A 14
F0 49 02 00 77 71 33 20 00 00 00 00 CE 51 6A 3B 70 55 10 10 2B A2 18 06 00 4A E6 00 22 00 9D 00 64 0E 14 20 6A 89 00 A0 00 00 01 20 15 0F 27 2D 3C 23 2C 14
C4 7A 02 00 77 71 33 20 00 00 00 00 10 5A 7B 41 80 55 11 11 2E A5 99 06 00 4C 06 01 22 11 9D 00 6C 0F 14 20 6A 89 00 A0 00 00 01 20 17 11 2B 31 42 26 2F 15
98 AB 02 00 77 71 33 20 00 00 00 00 31 62 7C 47 80 55 11 11 30 A7 1A 07 00 4C 06 01 22 22 9D 00 6C 0F 14 20 6A 89 00 A0 00 00 01 20 19 12 2F 36 48 28 31 15
Could you share any recomendations? p.s. ofc I know that all stuff is my own risk |
|
|
|
|
|
JuanHungLo
|
|
January 20, 2017, 08:37:29 PM |
|
Let's use the first strap for example: The "00" after the 40 9C 00, is the "field" that the manufacturers use to identify which memory type is affected by that strap. For your "brand" 00 may mean Hynix, it may mean Elpida, Use the https://drive.google.com/file/d/0B2-oGzLC-iwKRndWZEptOWo2eUU/edit, Tahiti_I_x64.exe, to identify which type of memory is yours. If yours is Hynix, then use the suggested straps for Hynix to replace your strap AFTER the above mentioned "field." Likewise, for Elpida. BUT DO NOT CHANGE THE ABOVE LISTED 'FIELD' FROM 00 TO 01 OR 02!!!! Hello, everyone! I have ASUS DCUII Top 1070/1600 with BIOS 015.041.000.000.000000 memory is H5GQ2H24AFR I've founded my straps. But as u can see last value for all straps is 0 not 1 as in 1st post. 40 9C 00 00 33 31 33 20 00 00 00 00 84 94 22 10 F0 54 09 06 0F 0B A2 01 00 23 80 00 22 AA 1C 00 12 01 14 20 8A 88 00 A0 00 00 01 20 06 05 0B 0C 11 0C 10 0D
80 38 01 00 55 51 33 20 00 00 00 00 E7 AC 35 20 50 55 0B 0D 1A 97 34 03 00 24 81 00 22 AA 1C 00 4B 06 14 20 9A 88 00 A0 00 00 01 20 0C 08 15 19 21 18 1B 11
90 5F 01 00 55 51 33 20 00 00 00 00 29 31 46 24 50 55 0C 0D 1C 18 A5 03 00 26 A1 00 22 AA 1C 00 4B 07 14 20 9A 88 00 A0 00 00 01 20 0D 0A 18 1B 25 19 1D 11
A0 86 01 00 55 51 33 20 00 00 00 00 29 B5 46 27 50 55 0C 0D 1E 99 05 04 00 26 A2 00 22 AA 1C 00 4B 08 14 20 AA 88 00 A0 00 00 01 20 0E 0A 1A 1E 28 1A 1F 11
74 B7 01 00 55 51 33 20 00 00 00 00 6B BD 57 2D 60 55 0D 0E 22 9C 96 04 00 28 C3 00 22 BB 1C 00 53 0A 14 20 BA 88 00 A0 00 00 01 20 10 0C 1E 22 2E 1D 23 12
48 E8 01 00 77 71 33 20 00 00 00 00 8C C5 58 31 60 55 0F 0F 25 1E 17 05 00 48 C4 00 22 CC 1C 00 5C 0B 14 20 4A 89 00 A0 00 00 01 20 12 0D 20 25 32 1F 26 13
1C 19 02 00 77 71 33 20 00 00 00 00 AD CD 69 37 70 55 0F 10 29 21 98 05 00 4A E5 00 22 EE 1C 00 64 0D 14 20 5A 89 00 A0 00 00 01 20 14 0E 24 2A 38 22 2A 14
F0 49 02 00 77 71 33 20 00 00 00 00 CE 51 6A 3B 70 55 10 10 2B A2 18 06 00 4A E6 00 22 00 9D 00 64 0E 14 20 6A 89 00 A0 00 00 01 20 15 0F 27 2D 3C 23 2C 14
C4 7A 02 00 77 71 33 20 00 00 00 00 10 5A 7B 41 80 55 11 11 2E A5 99 06 00 4C 06 01 22 11 9D 00 6C 0F 14 20 6A 89 00 A0 00 00 01 20 17 11 2B 31 42 26 2F 15
98 AB 02 00 77 71 33 20 00 00 00 00 31 62 7C 47 80 55 11 11 30 A7 1A 07 00 4C 06 01 22 22 9D 00 6C 0F 14 20 6A 89 00 A0 00 00 01 20 19 12 2F 36 48 28 31 15
Could you share any recomendations? p.s. ofc I know that all stuff is my own risk |
Bull markets are born on pessimism, grow on skepticism, mature on optimism, and die on euphoria. - John Templeton
|
|
|
zigun
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 20, 2017, 09:06:30 PM |
|
Let's use the first strap for example: The "00" after the 40 9C 00, is the "field" that the manufacturers use to identify which memory type is affected by that strap. For your "brand" 00 may mean Hynix, it may mean Elpida, Use the https://drive.google.com/file/d/0B2-oGzLC-iwKRndWZEptOWo2eUU/edit, Tahiti_I_x64.exe, to identify which type of memory is yours. If yours is Hynix, then use the suggested straps for Hynix to replace your strap AFTER the above mentioned "field." Likewise, for Elpida. BUT DO NOT CHANGE THE ABOVE LISTED 'FIELD' FROM 00 TO 01 OR 02!!!! Hello, everyone! I have ASUS DCUII Top 1070/1600 with BIOS 015.041.000.000.000000 memory is H5GQ2H24AFR I've founded my straps. But as u can see last value for all straps is 0 not 1 as in 1st post. 40 9C 00 00 33 31 33 20 00 00 00 00 84 94 22 10 F0 54 09 06 0F 0B A2 01 00 23 80 00 22 AA 1C 00 12 01 14 20 8A 88 00 A0 00 00 01 20 06 05 0B 0C 11 0C 10 0D
80 38 01 00 55 51 33 20 00 00 00 00 E7 AC 35 20 50 55 0B 0D 1A 97 34 03 00 24 81 00 22 AA 1C 00 4B 06 14 20 9A 88 00 A0 00 00 01 20 0C 08 15 19 21 18 1B 11
90 5F 01 00 55 51 33 20 00 00 00 00 29 31 46 24 50 55 0C 0D 1C 18 A5 03 00 26 A1 00 22 AA 1C 00 4B 07 14 20 9A 88 00 A0 00 00 01 20 0D 0A 18 1B 25 19 1D 11
A0 86 01 00 55 51 33 20 00 00 00 00 29 B5 46 27 50 55 0C 0D 1E 99 05 04 00 26 A2 00 22 AA 1C 00 4B 08 14 20 AA 88 00 A0 00 00 01 20 0E 0A 1A 1E 28 1A 1F 11
74 B7 01 00 55 51 33 20 00 00 00 00 6B BD 57 2D 60 55 0D 0E 22 9C 96 04 00 28 C3 00 22 BB 1C 00 53 0A 14 20 BA 88 00 A0 00 00 01 20 10 0C 1E 22 2E 1D 23 12
48 E8 01 00 77 71 33 20 00 00 00 00 8C C5 58 31 60 55 0F 0F 25 1E 17 05 00 48 C4 00 22 CC 1C 00 5C 0B 14 20 4A 89 00 A0 00 00 01 20 12 0D 20 25 32 1F 26 13
1C 19 02 00 77 71 33 20 00 00 00 00 AD CD 69 37 70 55 0F 10 29 21 98 05 00 4A E5 00 22 EE 1C 00 64 0D 14 20 5A 89 00 A0 00 00 01 20 14 0E 24 2A 38 22 2A 14
F0 49 02 00 77 71 33 20 00 00 00 00 CE 51 6A 3B 70 55 10 10 2B A2 18 06 00 4A E6 00 22 00 9D 00 64 0E 14 20 6A 89 00 A0 00 00 01 20 15 0F 27 2D 3C 23 2C 14
C4 7A 02 00 77 71 33 20 00 00 00 00 10 5A 7B 41 80 55 11 11 2E A5 99 06 00 4C 06 01 22 11 9D 00 6C 0F 14 20 6A 89 00 A0 00 00 01 20 17 11 2B 31 42 26 2F 15
98 AB 02 00 77 71 33 20 00 00 00 00 31 62 7C 47 80 55 11 11 30 A7 1A 07 00 4C 06 01 22 22 9D 00 6C 0F 14 20 6A 89 00 A0 00 00 01 20 19 12 2F 36 48 28 31 15
Could you share any recomendations? p.s. ofc I know that all stuff is my own risk I've identified this is Hynix AFR. You mean I should leave straps with 00 and replace next bytes or just insert new recomended straps? I'm not sure because after I don't have other straps with 01 |
|
|
|
|
|
JuanHungLo
|
|
January 20, 2017, 09:14:44 PM |
|
This is what is in the OP post on page 1 FOR HYNIX: 20 4E 00 01 33 31 33 20 00 00 00 00 61 88 11 08 D0 54 07 04 0C 07 C1 00 00 21 60 00 22 AA 1C 00 02 00 14 20 8A 88 80 A1 00 00 01 20 03 02 06 07 09 08 0D 0B
40 9C 00 01 33 31 33 20 00 00 00 00 84 94 22 10 F0 54 09 06 0F 0B A2 01 00 23 80 00 22 AA 1C 00 12 01 14 20 8A 88 00 A0 00 00 01 20 06 05 0B 0C 11 0C 10 0D
80 38 01 01 55 51 33 20 00 00 00 00 E7 AC 35 20 50 55 0B 0D 1A 97 34 03 00 24 81 00 22 AA 1C 00 4B 06 14 20 9A 88 00 A0 00 00 01 20 0C 08 15 19 21 18 1B 11
A0 86 01 01 55 51 33 20 00 00 00 00 29 31 46 24 50 55 0C 0D 1C 18 A5 03 00 26 A1 00 22 AA 1C 00 4B 07 14 20 9A 88 00 A0 00 00 01 20 0D 0A 18 1B 25 19 1D 11
1C 19 02 01 55 51 33 20 00 00 00 00 29 B5 46 27 50 55 0C 0D 1E 99 05 04 00 26 A2 00 22 AA 1C 00 4B 08 14 20 AA 88 00 A0 00 00 01 20 0E 0A 1A 1E 28 1A 1F 11
78 5D 02 01 55 51 33 20 00 00 00 00 6B BD 57 2D 60 55 0D 0E 22 9C 96 04 00 28 C3 00 22 BB 1C 00 53 0A 14 20 BA 88 00 A0 00 00 01 20 10 0C 1E 22 2E 1D 23 12
10 98 02 01 77 71 33 20 00 00 00 00 8C C5 48 2F 60 55 0F 0F 25 1E 17 05 00 48 C4 00 22 CC 1C 00 5C 0B 14 20 4A 89 00 A0 00 00 01 20 12 0D 20 25 32 1F 26 13
30 E6 02 01 77 71 33 20 00 00 00 00 AD CD 49 2F 70 55 0F 10 29 21 98 05 00 4A E5 00 22 EE 1C 00 64 0D 14 20 5A 89 00 A0 00 00 01 20 14 0E 24 2A 38 22 2A 14
40 0D 03 01 77 71 33 20 00 00 00 00 CE 51 4A 2F 70 55 10 10 2B A2 18 06 00 4A E6 00 22 00 9D 00 64 0E 14 20 6A 89 00 A0 00 00 01 20 15 0F 27 2D 3C 23 2C 14 Those in red MUST REMAIN the same value for YOUR BIOS. YOUR device says that 00 is Hynix, but the above example says that 01 is Hynix. Therefore, only change the bytes AFTER the value in red. Let's use the first strap for example: The "00" after the 40 9C 00, is the "field" that the manufacturers use to identify which memory type is affected by that strap. For your "brand" 00 may mean Hynix, it may mean Elpida, Use the https://drive.google.com/file/d/0B2-oGzLC-iwKRndWZEptOWo2eUU/edit, Tahiti_I_x64.exe, to identify which type of memory is yours. If yours is Hynix, then use the suggested straps for Hynix to replace your strap AFTER the above mentioned "field." Likewise, for Elpida. BUT DO NOT CHANGE THE ABOVE LISTED 'FIELD' FROM 00 TO 01 OR 02!!!! Hello, everyone! I have ASUS DCUII Top 1070/1600 with BIOS 015.041.000.000.000000 memory is H5GQ2H24AFR I've founded my straps. But as u can see last value for all straps is 0 not 1 as in 1st post. 40 9C 00 00 33 31 33 20 00 00 00 00 84 94 22 10 F0 54 09 06 0F 0B A2 01 00 23 80 00 22 AA 1C 00 12 01 14 20 8A 88 00 A0 00 00 01 20 06 05 0B 0C 11 0C 10 0D
80 38 01 00 55 51 33 20 00 00 00 00 E7 AC 35 20 50 55 0B 0D 1A 97 34 03 00 24 81 00 22 AA 1C 00 4B 06 14 20 9A 88 00 A0 00 00 01 20 0C 08 15 19 21 18 1B 11
90 5F 01 00 55 51 33 20 00 00 00 00 29 31 46 24 50 55 0C 0D 1C 18 A5 03 00 26 A1 00 22 AA 1C 00 4B 07 14 20 9A 88 00 A0 00 00 01 20 0D 0A 18 1B 25 19 1D 11
A0 86 01 00 55 51 33 20 00 00 00 00 29 B5 46 27 50 55 0C 0D 1E 99 05 04 00 26 A2 00 22 AA 1C 00 4B 08 14 20 AA 88 00 A0 00 00 01 20 0E 0A 1A 1E 28 1A 1F 11
74 B7 01 00 55 51 33 20 00 00 00 00 6B BD 57 2D 60 55 0D 0E 22 9C 96 04 00 28 C3 00 22 BB 1C 00 53 0A 14 20 BA 88 00 A0 00 00 01 20 10 0C 1E 22 2E 1D 23 12
48 E8 01 00 77 71 33 20 00 00 00 00 8C C5 58 31 60 55 0F 0F 25 1E 17 05 00 48 C4 00 22 CC 1C 00 5C 0B 14 20 4A 89 00 A0 00 00 01 20 12 0D 20 25 32 1F 26 13
1C 19 02 00 77 71 33 20 00 00 00 00 AD CD 69 37 70 55 0F 10 29 21 98 05 00 4A E5 00 22 EE 1C 00 64 0D 14 20 5A 89 00 A0 00 00 01 20 14 0E 24 2A 38 22 2A 14
F0 49 02 00 77 71 33 20 00 00 00 00 CE 51 6A 3B 70 55 10 10 2B A2 18 06 00 4A E6 00 22 00 9D 00 64 0E 14 20 6A 89 00 A0 00 00 01 20 15 0F 27 2D 3C 23 2C 14
C4 7A 02 00 77 71 33 20 00 00 00 00 10 5A 7B 41 80 55 11 11 2E A5 99 06 00 4C 06 01 22 11 9D 00 6C 0F 14 20 6A 89 00 A0 00 00 01 20 17 11 2B 31 42 26 2F 15
98 AB 02 00 77 71 33 20 00 00 00 00 31 62 7C 47 80 55 11 11 30 A7 1A 07 00 4C 06 01 22 22 9D 00 6C 0F 14 20 6A 89 00 A0 00 00 01 20 19 12 2F 36 48 28 31 15
Could you share any recomendations? p.s. ofc I know that all stuff is my own risk I've identified this is Hynix AFR. You mean I should leave straps with 00 and replace next bytes or just insert new recomended straps? I'm not sure because after I don't have other straps with 01 |
Bull markets are born on pessimism, grow on skepticism, mature on optimism, and die on euphoria. - John Templeton
|
|
|
zigun
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 20, 2017, 09:17:07 PM |
|
This is what is in the OP post on page 1 FOR HYNIX: 20 4E 00 01 33 31 33 20 00 00 00 00 61 88 11 08 D0 54 07 04 0C 07 C1 00 00 21 60 00 22 AA 1C 00 02 00 14 20 8A 88 80 A1 00 00 01 20 03 02 06 07 09 08 0D 0B
40 9C 00 01 33 31 33 20 00 00 00 00 84 94 22 10 F0 54 09 06 0F 0B A2 01 00 23 80 00 22 AA 1C 00 12 01 14 20 8A 88 00 A0 00 00 01 20 06 05 0B 0C 11 0C 10 0D
80 38 01 01 55 51 33 20 00 00 00 00 E7 AC 35 20 50 55 0B 0D 1A 97 34 03 00 24 81 00 22 AA 1C 00 4B 06 14 20 9A 88 00 A0 00 00 01 20 0C 08 15 19 21 18 1B 11
A0 86 01 01 55 51 33 20 00 00 00 00 29 31 46 24 50 55 0C 0D 1C 18 A5 03 00 26 A1 00 22 AA 1C 00 4B 07 14 20 9A 88 00 A0 00 00 01 20 0D 0A 18 1B 25 19 1D 11
1C 19 02 01 55 51 33 20 00 00 00 00 29 B5 46 27 50 55 0C 0D 1E 99 05 04 00 26 A2 00 22 AA 1C 00 4B 08 14 20 AA 88 00 A0 00 00 01 20 0E 0A 1A 1E 28 1A 1F 11
78 5D 02 01 55 51 33 20 00 00 00 00 6B BD 57 2D 60 55 0D 0E 22 9C 96 04 00 28 C3 00 22 BB 1C 00 53 0A 14 20 BA 88 00 A0 00 00 01 20 10 0C 1E 22 2E 1D 23 12
10 98 02 01 77 71 33 20 00 00 00 00 8C C5 48 2F 60 55 0F 0F 25 1E 17 05 00 48 C4 00 22 CC 1C 00 5C 0B 14 20 4A 89 00 A0 00 00 01 20 12 0D 20 25 32 1F 26 13
30 E6 02 01 77 71 33 20 00 00 00 00 AD CD 49 2F 70 55 0F 10 29 21 98 05 00 4A E5 00 22 EE 1C 00 64 0D 14 20 5A 89 00 A0 00 00 01 20 14 0E 24 2A 38 22 2A 14
40 0D 03 01 77 71 33 20 00 00 00 00 CE 51 4A 2F 70 55 10 10 2B A2 18 06 00 4A E6 00 22 00 9D 00 64 0E 14 20 6A 89 00 A0 00 00 01 20 15 0F 27 2D 3C 23 2C 14 Those in red MUST REMAIN the same value for YOUR BIOS. YOUR device says that 00 is Hynix, but the above example says that 01 is Hynix. Therefore, only change the bytes AFTER the value in red. Let's use the first strap for example: The "00" after the 40 9C 00, is the "field" that the manufacturers use to identify which memory type is affected by that strap. For your "brand" 00 may mean Hynix, it may mean Elpida, Use the https://drive.google.com/file/d/0B2-oGzLC-iwKRndWZEptOWo2eUU/edit, Tahiti_I_x64.exe, to identify which type of memory is yours. If yours is Hynix, then use the suggested straps for Hynix to replace your strap AFTER the above mentioned "field." Likewise, for Elpida. BUT DO NOT CHANGE THE ABOVE LISTED 'FIELD' FROM 00 TO 01 OR 02!!!! Hello, everyone! I have ASUS DCUII Top 1070/1600 with BIOS 015.041.000.000.000000 memory is H5GQ2H24AFR I've founded my straps. But as u can see last value for all straps is 0 not 1 as in 1st post. 40 9C 00 00 33 31 33 20 00 00 00 00 84 94 22 10 F0 54 09 06 0F 0B A2 01 00 23 80 00 22 AA 1C 00 12 01 14 20 8A 88 00 A0 00 00 01 20 06 05 0B 0C 11 0C 10 0D
80 38 01 00 55 51 33 20 00 00 00 00 E7 AC 35 20 50 55 0B 0D 1A 97 34 03 00 24 81 00 22 AA 1C 00 4B 06 14 20 9A 88 00 A0 00 00 01 20 0C 08 15 19 21 18 1B 11
90 5F 01 00 55 51 33 20 00 00 00 00 29 31 46 24 50 55 0C 0D 1C 18 A5 03 00 26 A1 00 22 AA 1C 00 4B 07 14 20 9A 88 00 A0 00 00 01 20 0D 0A 18 1B 25 19 1D 11
A0 86 01 00 55 51 33 20 00 00 00 00 29 B5 46 27 50 55 0C 0D 1E 99 05 04 00 26 A2 00 22 AA 1C 00 4B 08 14 20 AA 88 00 A0 00 00 01 20 0E 0A 1A 1E 28 1A 1F 11
74 B7 01 00 55 51 33 20 00 00 00 00 6B BD 57 2D 60 55 0D 0E 22 9C 96 04 00 28 C3 00 22 BB 1C 00 53 0A 14 20 BA 88 00 A0 00 00 01 20 10 0C 1E 22 2E 1D 23 12
48 E8 01 00 77 71 33 20 00 00 00 00 8C C5 58 31 60 55 0F 0F 25 1E 17 05 00 48 C4 00 22 CC 1C 00 5C 0B 14 20 4A 89 00 A0 00 00 01 20 12 0D 20 25 32 1F 26 13
1C 19 02 00 77 71 33 20 00 00 00 00 AD CD 69 37 70 55 0F 10 29 21 98 05 00 4A E5 00 22 EE 1C 00 64 0D 14 20 5A 89 00 A0 00 00 01 20 14 0E 24 2A 38 22 2A 14
F0 49 02 00 77 71 33 20 00 00 00 00 CE 51 6A 3B 70 55 10 10 2B A2 18 06 00 4A E6 00 22 00 9D 00 64 0E 14 20 6A 89 00 A0 00 00 01 20 15 0F 27 2D 3C 23 2C 14
C4 7A 02 00 77 71 33 20 00 00 00 00 10 5A 7B 41 80 55 11 11 2E A5 99 06 00 4C 06 01 22 11 9D 00 6C 0F 14 20 6A 89 00 A0 00 00 01 20 17 11 2B 31 42 26 2F 15
98 AB 02 00 77 71 33 20 00 00 00 00 31 62 7C 47 80 55 11 11 30 A7 1A 07 00 4C 06 01 22 22 9D 00 6C 0F 14 20 6A 89 00 A0 00 00 01 20 19 12 2F 36 48 28 31 15
Could you share any recomendations? p.s. ofc I know that all stuff is my own risk I've identified this is Hynix AFR. You mean I should leave straps with 00 and replace next bytes or just insert new recomended straps? I'm not sure because after I don't have other straps with 01 Ok, It's clear now! thanks a lot! |
|
|
|
|
zigun
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 20, 2017, 10:02:12 PM |
|
I suppose this is a correct patch for ASUS r9 280x DCUII Top with Hynix AFR memory Idea is a change range of straps and little bit change timing for 1551-Max Mhz range. This model has two additional straps and it were replaced on 2100 Mhz and 2200 Mhz just for fill Timings for 1st 5 straps stay as default Next 3 straps have modified timings. 40 9C 00 00 33 31 33 20 00 00 00 00 84 94 22 10 F0 54 09 06 0F 0B A2 01 00 23 80 00 22 AA 1C 00 12 01 14 20 8A 88 00 A0 00 00 01 20 06 05 0B 0C 11 0C 10 0D
80 38 01 00 55 51 33 20 00 00 00 00 E7 AC 35 20 50 55 0B 0D 1A 97 34 03 00 24 81 00 22 AA 1C 00 4B 06 14 20 9A 88 00 A0 00 00 01 20 0C 08 15 19 21 18 1B 11
A0 86 01 00 55 51 33 20 00 00 00 00 29 31 46 24 50 55 0C 0D 1C 18 A5 03 00 26 A1 00 22 AA 1C 00 4B 07 14 20 9A 88 00 A0 00 00 01 20 0D 0A 18 1B 25 19 1D 11
1C 19 02 00 55 51 33 20 00 00 00 00 29 B5 46 27 50 55 0C 0D 1E 99 05 04 00 26 A2 00 22 AA 1C 00 4B 08 14 20 AA 88 00 A0 00 00 01 20 0E 0A 1A 1E 28 1A 1F 11
78 5D 02 00 55 51 33 20 00 00 00 00 6B BD 57 2D 60 55 0D 0E 22 9C 96 04 00 28 C3 00 22 BB 1C 00 53 0A 14 20 BA 88 00 A0 00 00 01 20 10 0C 1E 22 2E 1D 23 12
10 98 02 00 77 71 33 20 00 00 00 00 8C C5 48 2F 60 55 0F 0F 25 1E 17 05 00 48 C4 00 22 CC 1C 00 5C 0B 14 20 4A 89 00 A0 00 00 01 20 12 0D 20 25 32 1F 26 13
30 E6 02 00 77 71 33 20 00 00 00 00 AD CD 49 2F 70 55 0F 10 29 21 98 05 00 4A E5 00 22 EE 1C 00 64 0D 14 20 5A 89 00 A0 00 00 01 20 14 0E 24 2A 38 22 2A 14
40 0D 03 00 77 71 33 20 00 00 00 00 CE 51 4A 2F 70 55 10 10 2B A2 18 06 00 4A E6 00 22 00 9D 00 64 0E 14 20 6A 89 00 A0 00 00 01 20 15 0F 27 2D 3C 23 2C 14
50 34 03 00 77 71 33 20 00 00 00 00 10 5A 7B 41 80 55 11 11 2E A5 99 06 00 4C 06 01 22 11 9D 00 6C 0F 14 20 6A 89 00 A0 00 00 01 20 17 11 2B 31 42 26 2F 15
60 5B 03 00 77 71 33 20 00 00 00 00 31 62 7C 47 80 55 11 11 30 A7 1A 07 00 4C 06 01 22 22 9D 00 6C 0F 14 20 6A 89 00 A0 00 00 01 20 19 12 2F 36 48 28 31 15
|
|
|
|
|
adaseb (OP)
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
January 21, 2017, 01:28:00 AM |
|
Both the ASUS 7970 and ASUS 280x are already modded in the first post. You can download them and flash instead of modding them manually with hex editors.
|
|
|
|
|
KL0nLutiy
Member
Offline
Activity: 158
Merit: 10
|
|
January 30, 2017, 02:44:37 PM |
|
Can I use the bios for 290x reference with 113-C6710151-100 bios from the first post?
|
|
|
|
Dinmaster
Jr. Member
Offline
Activity: 34
Merit: 1
|
|
January 31, 2017, 07:43:24 PM |
|
The first one posted on page one. Asus 280x direct cuii. I tried it. Claymore 11 I was getting errors on one of the 6 cards in the system and it was acting weird. Some of the cards weren't putting up accepted shares or anything. Possilly the ram isn't hynx I'll have more time to look into it tonight but thoughts on that? Perhaps the undervolt is causing issues but I manually changed it to higher levels and still problems.
|
|
|
|
|
|
Foss
|
|
February 01, 2017, 10:41:24 AM |
|
Share please good straps for 290x elpida bbbg. On zec have 337 H/s, 1050/1500 mHz.
|
BTC: 147kwy3LndX6jkwGC3mU9j6rZMWU8g1Amd
DASH: XhR4V6ChnQp7LDWhpArwBMXARxU5LGiq8a
ETH: 0xe4b10dff72b58a363a3c8b70e21cfb236e2697c9
|
|
|
|
enzeperix
|
 |
February 04, 2017, 10:20:24 PM |
|
Hello gentlemen,
I want to optimize my Sapphire HD7970s Dualx OC for mining altcoins. But at this point i'm afraid not to brick them so i dared to ask some advice from you which have more experience than me .
What i did so far was to download GPU-Z which i used to save the current BIOS of one of my cards and then i opened it with VBE7 to see the current settings which i will post below.
Can you please suggest what settings should i modify so i can improve the power consumption and hashrate ?
Owerview
ROM Message : Tahiti B0 XT GDDR5 3GB 500e/150m
BIOS Version : 015.025.000.099.000000
Part Number : 113-2104XTHY-OB5
Device ID : 1002 - 6798
Vendor ID : 174B
Subsystem ID : 3000
VRM: CHL822x
Memory Type : Hynix H5GQ2H24AFR
######## State 0 - Boot ########
------------------------
#0
COre clock : 950
Memory clock : 1425
VDDC : 1175
-------------------------
######## State 1 - Performance ######
------------------------------
#4
COre clock : 300
Memory clock : 150
VDDC : 850
-------------------------
#5
COre clock : 501
Memory clock : 1425
VDDC : 950
------------------------
#0
COre clock : 950
Memory clock : 1425
VDDC : 1175
------------------------------
######### State 2 - UVD ##########
-------------------------------
#5
COre clock : 501
Memory clock : 1425
VDDC : 950
----------------------------
#0
COre clock : 950
Memory clock : 1425
VDDC : 1175
-----------------------------
OverDrive
Max. Core Clock : 1500
Max. Memory Clock : 2000
TDP limit (%) : 20
PowerTune
TDP (W) : 223
Power Limit (W) : 180 - 268
|
|
|
|
|
|
JuanHungLo
|
|
February 04, 2017, 10:29:43 PM |
|
I have many of those. Here you go: http://www.filedropper.com/rig1sapphire7970hynix1050-1500-1096voltage set at 1.093, adjust with VBE7 as needed. Run clock at 1050, memory at 1500. Also, don't worry about bricking the card, it has two BIOSes. |
Bull markets are born on pessimism, grow on skepticism, mature on optimism, and die on euphoria. - John Templeton
|
|
|
|
ivcelmik
|
|
February 05, 2017, 05:49:30 AM |
|
Does someone have something modified for Fury?
|
|
|
|
|
adaseb (OP)
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
February 05, 2017, 11:35:07 AM |
|
For the Tahiti bios's if you are getting lots of rejects or your speed is faster than 350 H/S you need to lower your intensity and it should fix all these issues.
|
|
|
|
|
|
batko
|
|
February 05, 2017, 11:48:07 AM |
|
Tahiti 350sol? hmm my best result with R9 280x is 320sol 1100/1625 hynix AFR full stable.
Optminer 1.6.0 win 7 with 15.12 driver
maybe with high clock, but power consumption than rise.
|
Donation: ETH: 0x0c8ce94dd3d1bfd09c0f887559c61d1b551e4b4d
|
|
|
adaseb (OP)
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
February 05, 2017, 12:51:41 PM |
|
I said your speed shouldn't be over 350H/s. If it is something is wrong.
|
|
|
|
|
go6ooo1212
Legendary
Offline
Activity: 1512
Merit: 1000
quarkchain.io
|
|
February 12, 2017, 09:02:23 PM |
|
Hello , mates , could someone help me modding some 470s with Micron memory. I can't access it's timings properly with the current releases of PolarisBiosEditor... I've uploaded an original BIOS here: http://s000.tinyupload.com/?file_id=69225432083678420323 |
|
|
|
|
adaseb (OP)
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
February 12, 2017, 10:02:35 PM |
|
This thread is primarily for the Tahiti based GPUs like the 7950/7970/280x. For the 470 search for the "RX 470" thread on here and they got examples there. |
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
February 15, 2017, 02:26:57 PM |
|
Hey guys ! Quick question, So I got a 280x tri-x 251-100sa for fun to play with. Its running 300sols on the custom timings, but what I really want is to bring the voltage down to save as much power as possible. Right now its 1.256v....too high for me. Everytime I try to modify voltages I get stuck at 0.95v and 500mhz. It sucks though, a 60.6% asic. Can anyone point me in the right direction ? I'm just starting to look into the 280x tahiti stuff.
oh yeah MSI afterburner doesnt control anything, although you can play with the values.
|
|
|
|
|
|
