m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 09, 2017, 07:48:13 PM |
|
Nice work man, keep up the good work
|
|
|
|
bobsmoke
|
|
January 09, 2017, 08:45:57 PM |
|
Running 1.3.1 and getting 300 S/s per R9 290x on a normal PC and running stable for the last hours.
[2017-01-09 21:42:14.300] [info] [GPU0] 161.0 I/s 310.0 S/s (5s) 159.8 I/s 301.2 S/s (1m) 159.9 I/s 300.3 S/s (1h) [2017-01-09 21:42:16.983] [info] [GPU1] 159.0 I/s 297.2 S/s (5s) 159.6 I/s 299.3 S/s (1m) 159.7 I/s 299.9 S/s (1h) [2017-01-09 21:42:18.968] [info] [Total] 320.0 I/s 617.0 S/s (5s) 319.4 I/s 601.5 S/s (1m) 319.5 I/s 600.1 S/s (1h)
Quite impressive work - The last time I tried a zcash GPU miner was SilentArmy and got ~50 Sol/s if I recall correctly....
|
|
|
|
reelen
|
|
January 09, 2017, 09:22:37 PM |
|
Only getting about 200~ sols/s with my RX 480 Rig. Not even clos to the 260 expected. These cards are all slightly overclocked as well.
|
|
|
|
zzzzzzzzzz
|
|
January 09, 2017, 09:27:22 PM |
|
Only getting about 200~ sols/s with my RX 480 Rig. Not even clos to the 260 expected. These cards are all slightly overclocked as well.
Windows or linux? The 260 sol/s is for linux. The release notes (README) say that the newer R9 and RX GPUs run their best on linux at this point.
|
|
|
|
reelen
|
|
January 09, 2017, 09:30:52 PM |
|
Only getting about 200~ sols/s with my RX 480 Rig. Not even clos to the 260 expected. These cards are all slightly overclocked as well.
Windows or linux? The 260 sol/s is for linux. The release notes (README) say that the newer R9 and RX GPUs run their best on linux at this point. Totally missed that, I apologize. Thank you for gently pointing that out.
|
|
|
|
WilderX
|
|
January 09, 2017, 09:33:42 PM |
|
and here for suprnova @ windows: SETX GPU_MAX_ALLOC_PERCENT 100 SETX GPU_USE_SYNC_OBJECTS 1 SETX GPU_FORCE_64BIT_PTR=1
optiminer -s zec-eu.suprnova.cc:2142 -u youraddress.rig1 -p x -i 4
pause
have fun Does this work without registering to your pool?
|
|
|
|
orbital_station1
Newbie
Offline
Activity: 24
Merit: 0
|
|
January 10, 2017, 01:32:44 PM |
|
Getting a lot of "low lifficulty shares" warnings...
I use r9 390. start.bat:
SETX GPU_MAX_ALLOC_PERCENT 100 SETX GPU_USE_SYNC_OBJECTS 1 SETX GPU_FORCE_64BIT_PTR 1
optiminer -s zec-eu.suprnova.cc:2142 -u login.worker -p mypw
pause
Pool registers 0 H/s.
What am I doing wrong?
|
|
|
|
shadabahmed
|
|
January 10, 2017, 06:22:06 PM |
|
what is the speed of rx470 with this miner?
|
Am I spamming? Report me!
|
|
|
H0RV4T
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 10, 2017, 08:04:43 PM |
|
Claymore V10, 3xRx480 = 710 h/s Optiminer V1.3 3xRx480 Linux = 780 h/s What is dev fee for optiminer? I read it is 10%. Is it then 780 - 10% = 702 h/s? Or my real speed of Rig is 780 h/s?Dummy me, now i se first post "All shown hash rates are net rate, i.e., with fee deducted. What you see is what you get!"
|
|
|
|
ocminer
Legendary
Offline
Activity: 2688
Merit: 1240
|
|
January 10, 2017, 08:11:05 PM |
|
Getting a lot of "low lifficulty shares" warnings...
I use r9 390. start.bat:
SETX GPU_MAX_ALLOC_PERCENT 100 SETX GPU_USE_SYNC_OBJECTS 1 SETX GPU_FORCE_64BIT_PTR 1
optiminer -s zec-eu.suprnova.cc:2142 -u login.worker -p mypw
pause
Pool registers 0 H/s.
What am I doing wrong?
It's probably easier for testing if you mine with your wallet address. Generate an address at your favourite exchange, then do: optiminer -s zec-eu.suprnova.cc:2142 -u WALLETADDRESS.rig1 -p x And access the anondashboard: https://zec.suprnova.cc/index.php?page=anondashboard&user=WALLETADDRESSand you should see some shares etc. (be sure to set a rigname when mining.. so WALLETADDRESS. rig1
|
suprnova pools - reliable mining pools - #suprnova on freenet https://www.suprnova.cc - FOLLOW us @ Twitter ! twitter.com/SuprnovaPools
|
|
|
dinc
|
|
January 10, 2017, 08:15:03 PM |
|
what is the speed of rx470 with this miner?
240h/s-245 stock rx470
|
|
|
|
optiminer (OP)
|
|
January 11, 2017, 01:57:15 AM |
|
Version 1.3.2 released!
This is a bugfix release. No change in speed expected!
[1.3.2] Support older versions of fgrlx again. [1.3.2] Fix abort when failing to list devices of platform. [1.3.2] Fix no reconnect after 'No such host' errors. [1.3.2] Add --benchmark options.
|
|
|
|
zzzzzzzzzz
|
|
January 11, 2017, 03:58:47 AM |
|
Version 1.3.2 released!
This is a bugfix release. No change in speed expected!
[1.3.2] Support older versions of fgrlx again. [1.3.2] Fix abort when failing to list devices of platform. [1.3.2] Fix no reconnect after 'No such host' errors. [1.3.2] Add --benchmark options.
Thank you Opti!
|
|
|
|
LiOoO
Newbie
Offline
Activity: 18
Merit: 0
|
|
January 11, 2017, 01:42:07 PM |
|
Version 1.3.2 released!
This is a bugfix release. No change in speed expected!
[1.3.2] Support older versions of fgrlx again. [1.3.2] Fix abort when failing to list devices of platform. [1.3.2] Fix no reconnect after 'No such host' errors. [1.3.2] Add --benchmark options.
I found miner couple of times crashed when internet connection is lost... There is some bug or I'm doing something wrong?
|
|
|
|
pintycar
Newbie
Offline
Activity: 59
Merit: 0
|
|
January 11, 2017, 08:26:27 PM |
|
First of all, thank you optiminer for your work with this miner. It is by far the highest performing one. However it behaves a bit erratically. For example, I use a rig with 4x290x cards (actually it's 2x295x2s) and without apparent reason, it stopped mining on two of them at one point. The cards are rock solid stable and they've never skipped a beat with Claymore's miner or previous scrypt miners. Please see the log below in case you have any suggestions (do note that from 18:39, only 2 GPUs seem to be mining anymore) [2017-01-11 18:39:41.738] [info] [Total] 644.0 I/s 1208.4 S/s (5s) 642.8 I/s 1214.0 S/s (1m) 643.5 I/s 1208.6 S/s (1h) [2017-01-11 18:39:42.833] [info] [GPU0] 161.0 I/s 304.8 S/s (5s) 160.4 I/s 302.2 S/s (1m) 160.7 I/s 301.8 S/s (1h) [2017-01-11 18:39:42.980] [info] [GPU3] 161.0 I/s 308.4 S/s (5s) 160.8 I/s 303.4 S/s (1m) 161.0 I/s 302.7 S/s (1h) [2017-01-11 18:39:43.616] [info] [GPU2] 161.0 I/s 294.6 S/s (5s) 160.8 I/s 305.1 S/s (1m) 161.0 I/s 302.1 S/s (1h) [2017-01-11 18:39:44.570] [info] [GPU1] 161.0 I/s 311.4 S/s (5s) 160.8 I/s 302.1 S/s (1m) 160.9 I/s 302.0 S/s (1h) [2017-01-11 18:39:45.311] [info] [GPU2] Share accepted! (14812 / 14826) [2017-01-11 18:39:46.482] [info] [GPU0] Share accepted! (14813 / 14827) [2017-01-11 18:39:46.630] [info] [GPU1] Share accepted! (14814 / 14828) [2017-01-11 18:39:46.753] [info] [Total] 641.0 I/s 1203.0 S/s (5s) 643.1 I/s 1213.3 S/s (1m) 643.5 I/s 1208.6 S/s (1h) [2017-01-11 18:39:47.553] [info] [GPU0] Share accepted! (14815 / 14829) [2017-01-11 18:39:47.851] [info] [GPU0] 160.0 I/s 295.2 S/s (5s) 160.4 I/s 301.7 S/s (1m) 160.7 I/s 301.8 S/s (1h) [2017-01-11 18:39:47.996] [info] [GPU3] 160.0 I/s 302.6 S/s (5s) 160.8 I/s 304.1 S/s (1m) 161.0 I/s 302.7 S/s (1h) [2017-01-11 18:39:48.628] [info] [GPU2] 160.0 I/s 303.0 S/s (5s) 160.8 I/s 304.8 S/s (1m) 161.0 I/s 302.1 S/s (1h) [2017-01-11 18:39:49.592] [info] [GPU1] 161.0 I/s 295.0 S/s (5s) 160.8 I/s 301.7 S/s (1m) 160.9 I/s 302.0 S/s (1h) [2017-01-11 18:39:51.756] [info] [Total] 602.0 I/s 1106.2 S/s (5s) 639.8 I/s 1202.8 S/s (1m) 643.5 I/s 1208.6 S/s (1h) [2017-01-11 18:39:53.009] [info] [GPU3] 162.0 I/s 299.6 S/s (5s) 160.8 I/s 301.9 S/s (1m) 161.0 I/s 302.7 S/s (1h) [2017-01-11 18:39:53.642] [info] [GPU2] 162.0 I/s 300.6 S/s (5s) 160.8 I/s 304.1 S/s (1m) 161.0 I/s 302.1 S/s (1h) [2017-01-11 18:39:56.769] [info] [Total] 256.0 I/s 487.2 S/s (5s) 609.3 I/s 1145.8 S/s (1m) 643.5 I/s 1208.6 S/s (1h) [2017-01-11 18:39:58.029] [info] [GPU3] 162.0 I/s 306.6 S/s (5s) 161.0 I/s 304.1 S/s (1m) 161.0 I/s 302.7 S/s (1h) [2017-01-11 18:39:58.647] [info] [GPU2] 72.0 I/s 128.4 S/s (5s) 153.4 I/s 289.0 S/s (1m) 161.0 I/s 302.1 S/s (1h) [2017-01-11 18:39:59.039] [info] [GPU3] Share accepted! (14816 / 14830) [2017-01-11 18:40:01.555] [info] [GPU3] Share accepted! (14817 / 14831) [2017-01-11 18:40:01.797] [info] [Total] 326.0 I/s 596.4 S/s (5s) 580.5 I/s 1088.9 S/s (1m) 643.5 I/s 1208.6 S/s (1h) [2017-01-11 18:40:03.044] [info] [GPU3] 164.0 I/s 311.0 S/s (5s) 161.3 I/s 303.7 S/s (1m) 161.0 I/s 302.7 S/s (1h) [2017-01-11 18:40:03.671] [info] [GPU2] 163.0 I/s 292.2 S/s (5s) 153.7 I/s 288.4 S/s (1m) 161.0 I/s 302.1 S/s (1h) [2017-01-11 18:40:06.824] [info] [Total] 326.0 I/s 601.0 S/s (5s) 555.5 I/s 1039.9 S/s (1m) 643.5 I/s 1208.6 S/s (1h) [2017-01-11 18:40:08.064] [info] [GPU3] 163.0 I/s 300.6 S/s (5s) 161.5 I/s 304.1 S/s (1m) 161.0 I/s 302.7 S/s (1h) [2017-01-11 18:40:08.703] [info] [GPU2] 162.0 I/s 290.4 S/s (5s) 153.9 I/s 286.8 S/s (1m) 161.0 I/s 302.1 S/s (1h) [2017-01-11 18:40:10.348] [info] [GPU2] Share accepted! (14818 / 14832) [2017-01-11 18:40:11.529] [info] [GPU3] Share accepted! (14819 / 14833) [2017-01-11 18:40:11.837] [info] [Total] 321.0 I/s 595.6 S/s (5s) 529.7 I/s 990.6 S/s (1m) 643.5 I/s 1208.6 S/s (1h)
|
|
|
|
optiminer (OP)
|
|
January 11, 2017, 08:52:50 PM |
|
First of all, thank you optiminer for your work with this miner. It is by far the highest performing one. However it behaves a bit erratically. For example, I use a rig with 4x290x cards (actually it's 2x295x2s) and without apparent reason, it stopped mining on two of them at one point. The cards are rock solid stable and they've never skipped a beat with Claymore's miner or previous scrypt miners. Please see the log below in case you have any suggestions (do note that from 18:39, only 2 GPUs seem to be mining anymore) So far all reported GPU hangs turned out to be hardware related and usually required a reboot to get the GPUs running again. I suggest to try the watchdog feature.
|
|
|
|
sorry2xs
Legendary
Offline
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
|
January 12, 2017, 07:33:52 AM |
|
is the dev fee classified info
|
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX THAT NO GOOD DO GOODER BAT!!!
|
|
|
LiOoO
Newbie
Offline
Activity: 18
Merit: 0
|
|
January 12, 2017, 07:51:53 AM |
|
Version 1.3.2 released!
This is a bugfix release. No change in speed expected!
[1.3.2] Support older versions of fgrlx again. [1.3.2] Fix abort when failing to list devices of platform. [1.3.2] Fix no reconnect after 'No such host' errors. [1.3.2] Add --benchmark options.
I found miner couple of times crashed when internet connection is lost... There is some bug or I'm doing something wrong? I have small farm with close to 100 GPUs, and restarting is not solution for me because i don't have dummy plugs on my rigs. If i don't connect monitor to first GPU, rigs will fail to restart. I noticed that 100% of time when miner is stuck is when internet connection is lost! It says internet connection to server is lost, miner is trying to reconect and usually then miner crashes... I like speed of miner and stability when there is no problem with internet connection. Please fix this bug so i can use your miner!
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
January 12, 2017, 08:22:06 AM |
|
Version 1.3.2 released!
This is a bugfix release. No change in speed expected!
[1.3.2] Support older versions of fgrlx again. [1.3.2] Fix abort when failing to list devices of platform. [1.3.2] Fix no reconnect after 'No such host' errors. [1.3.2] Add --benchmark options.
I found miner couple of times crashed when internet connection is lost... There is some bug or I'm doing something wrong? I have small farm with close to 100 GPUs, and restarting is not solution for me because i don't have dummy plugs on my rigs. If i don't connect monitor to first GPU, rigs will fail to restart. I noticed that 100% of time when miner is stuck is when internet connection is lost! It says internet connection to server is lost, miner is trying to reconect and usually then miner crashes... I like speed of miner and stability when there is no problem with internet connection. Please fix this bug so i can use your miner! You have close to 100GPU farm and you don't have a proper monitoring/reboot system ? If miner fail in any way, you should have automated script/app/hardwares that reboot your stuff soft or hard or take appropriate software action (kill/restart miners, and so on). Also why not fix internet connection ?
|
|
|
|
LiOoO
Newbie
Offline
Activity: 18
Merit: 0
|
|
January 12, 2017, 08:24:56 AM |
|
Version 1.3.2 released!
This is a bugfix release. No change in speed expected!
[1.3.2] Support older versions of fgrlx again. [1.3.2] Fix abort when failing to list devices of platform. [1.3.2] Fix no reconnect after 'No such host' errors. [1.3.2] Add --benchmark options.
I found miner couple of times crashed when internet connection is lost... There is some bug or I'm doing something wrong? I have small farm with close to 100 GPUs, and restarting is not solution for me because i don't have dummy plugs on my rigs. If i don't connect monitor to first GPU, rigs will fail to restart. I noticed that 100% of time when miner is stuck is when internet connection is lost! It says internet connection to server is lost, miner is trying to reconect and usually then miner crashes... I like speed of miner and stability when there is no problem with internet connection. Please fix this bug so i can use your miner! You have close to 100GPU farm and you don't have a proper monitoring/reboot system ? If miner fail in any way, you should have automated script/app/hardwares that reboot your stuff soft or hard or take appropriate software action (kill/restart miners, and so on). Also why not fix internet connection ? I have few places with rigs... On one of them Internet connection drops every few hours...
|
|
|
|
|