Optiminer/Zcash v1.7 (GPU, Windows+Linux, AMD)

[m1n1ngP4d4w4n]

Nice work man, keep up the good work 

[bobsmoke]

Running 1.3.1 and getting 300 S/s per R9 290x on a normal PC and running stable for the last hours.

[2017-01-09 21:42:14.300] [info] [GPU0]  161.0 I/s 310.0 S/s (5s) 159.8 I/s 301.2 S/s (1m) 159.9 I/s 300.3 S/s (1h)
[2017-01-09 21:42:16.983] [info] [GPU1]  159.0 I/s 297.2 S/s (5s) 159.6 I/s 299.3 S/s (1m) 159.7 I/s 299.9 S/s (1h)
[2017-01-09 21:42:18.968] [info] [Total]  320.0 I/s 617.0 S/s (5s) 319.4 I/s 601.5 S/s (1m) 319.5 I/s 600.1 S/s (1h)

Quite impressive work - The last time I tried a zcash GPU miner was SilentArmy and got ~50 Sol/s if I recall correctly....

[reelen]

Only getting about 200~ sols/s with my RX 480 Rig.  Not even clos to the 260 expected.  These cards are all slightly overclocked as well.

[zzzzzzzzzz]

Only getting about 200~ sols/s with my RX 480 Rig.  Not even clos to the 260 expected.  These cards are all slightly overclocked as well.

Windows or linux? The 260 sol/s is for linux. The release notes (README) say that the newer R9 and RX GPUs run their best on linux at this point.

[reelen]

Only getting about 200~ sols/s with my RX 480 Rig.  Not even clos to the 260 expected.  These cards are all slightly overclocked as well.

Windows or linux? The 260 sol/s is for linux. The release notes (README) say that the newer R9 and RX GPUs run their best on linux at this point.

Totally missed that, I apologize.  Thank you for gently pointing that out.

[WilderX]

and here for suprnova @ windows:

Code:

SETX GPU_MAX_ALLOC_PERCENT 100
SETX GPU_USE_SYNC_OBJECTS 1
SETX GPU_FORCE_64BIT_PTR=1

optiminer -s zec-eu.suprnova.cc:2142 -u youraddress.rig1 -p x -i 4

pause

have fun

Does this work without registering to your pool?

[orbital_station1]

Getting a lot of "low lifficulty shares" warnings...

I use r9 390.
start.bat:

SETX GPU_MAX_ALLOC_PERCENT 100
SETX GPU_USE_SYNC_OBJECTS 1
SETX GPU_FORCE_64BIT_PTR 1

optiminer  -s zec-eu.suprnova.cc:2142 -u login.worker -p mypw

pause

Pool registers 0 H/s.

What am I doing wrong?

[shadabahmed]

what is the speed of rx470 with this miner?

[H0RV4T]

Claymore V10, 3xRx480 = 710 h/s
Optiminer V1.3 3xRx480 Linux = 780 h/s

What is dev fee for optiminer? I read it is 10%. Is it then 780 - 10% = 702 h/s? Or my real speed of Rig is 780 h/s?

Dummy me, now i se first post "All shown hash rates are net rate, i.e., with fee deducted. What you see is what you get!"

[ocminer]

Getting a lot of "low lifficulty shares" warnings...

I use r9 390.
start.bat:

SETX GPU_MAX_ALLOC_PERCENT 100
SETX GPU_USE_SYNC_OBJECTS 1
SETX GPU_FORCE_64BIT_PTR 1

optiminer  -s zec-eu.suprnova.cc:2142 -u login.worker -p mypw

pause

Pool registers 0 H/s.

What am I doing wrong?

It's probably easier for testing if you mine with your wallet address.

Generate an address at your favourite exchange, then do:

optiminer  -s zec-eu.suprnova.cc:2142 -u WALLETADDRESS.rig1 -p x

And access the anondashboard:

https://zec.suprnova.cc/index.php?page=anondashboard&user=WALLETADDRESS

and you should see some shares etc.

(be sure to set a rigname when mining.. so WALLETADDRESS.rig1

[dinc]

what is the speed of rx470 with this miner?

240h/s-245 stock rx470

[optiminer]

Version 1.3.2 released!

This is a bugfix release. No change in speed expected!

[1.3.2] Support older versions of fgrlx again.
[1.3.2] Fix abort when failing to list devices of platform.
[1.3.2] Fix no reconnect after 'No such host' errors.
[1.3.2] Add --benchmark options.

[zzzzzzzzzz]

Version 1.3.2 released!

This is a bugfix release. No change in speed expected!

[1.3.2] Support older versions of fgrlx again.
[1.3.2] Fix abort when failing to list devices of platform.
[1.3.2] Fix no reconnect after 'No such host' errors.
[1.3.2] Add --benchmark options.

Thank you Opti!

[LiOoO]

Version 1.3.2 released!

This is a bugfix release. No change in speed expected!

[1.3.2] Support older versions of fgrlx again.
[1.3.2] Fix abort when failing to list devices of platform.
[1.3.2] Fix no reconnect after 'No such host' errors.
[1.3.2] Add --benchmark options.

I found miner couple of times  crashed when internet connection is lost...
There is some bug or I'm doing something wrong?

[pintycar]

First of all, thank you optiminer for your work with this miner. It is by far the highest performing one. However it behaves a bit erratically. For example, I use a rig with 4x290x cards (actually it's 2x295x2s) and without apparent reason, it stopped mining on two of them at one point. The cards are rock solid stable and they've never skipped a beat with Claymore's miner or previous scrypt miners. Please see the log below in case you have any suggestions  (do note that from 18:39, only 2 GPUs seem to be mining anymore)

[2017-01-11 18:39:41.738] [info] [Total]  644.0 I/s 1208.4 S/s (5s) 642.8 I/s 1214.0 S/s (1m) 643.5 I/s 1208.6 S/s (1h)
[2017-01-11 18:39:42.833] [info] [GPU0]  161.0 I/s 304.8 S/s (5s) 160.4 I/s 302.2 S/s (1m) 160.7 I/s 301.8 S/s (1h)
[2017-01-11 18:39:42.980] [info] [GPU3]  161.0 I/s 308.4 S/s (5s) 160.8 I/s 303.4 S/s (1m) 161.0 I/s 302.7 S/s (1h)
[2017-01-11 18:39:43.616] [info] [GPU2]  161.0 I/s 294.6 S/s (5s) 160.8 I/s 305.1 S/s (1m) 161.0 I/s 302.1 S/s (1h)
[2017-01-11 18:39:44.570] [info] [GPU1]  161.0 I/s 311.4 S/s (5s) 160.8 I/s 302.1 S/s (1m) 160.9 I/s 302.0 S/s (1h)
[2017-01-11 18:39:45.311] [info] [GPU2] Share accepted! (14812 / 14826)
[2017-01-11 18:39:46.482] [info] [GPU0] Share accepted! (14813 / 14827)
[2017-01-11 18:39:46.630] [info] [GPU1] Share accepted! (14814 / 14828)
[2017-01-11 18:39:46.753] [info] [Total]  641.0 I/s 1203.0 S/s (5s) 643.1 I/s 1213.3 S/s (1m) 643.5 I/s 1208.6 S/s (1h)
[2017-01-11 18:39:47.553] [info] [GPU0] Share accepted! (14815 / 14829)
[2017-01-11 18:39:47.851] [info] [GPU0]  160.0 I/s 295.2 S/s (5s) 160.4 I/s 301.7 S/s (1m) 160.7 I/s 301.8 S/s (1h)
[2017-01-11 18:39:47.996] [info] [GPU3]  160.0 I/s 302.6 S/s (5s) 160.8 I/s 304.1 S/s (1m) 161.0 I/s 302.7 S/s (1h)
[2017-01-11 18:39:48.628] [info] [GPU2]  160.0 I/s 303.0 S/s (5s) 160.8 I/s 304.8 S/s (1m) 161.0 I/s 302.1 S/s (1h)
[2017-01-11 18:39:49.592] [info] [GPU1]  161.0 I/s 295.0 S/s (5s) 160.8 I/s 301.7 S/s (1m) 160.9 I/s 302.0 S/s (1h)
[2017-01-11 18:39:51.756] [info] [Total]  602.0 I/s 1106.2 S/s (5s) 639.8 I/s 1202.8 S/s (1m) 643.5 I/s 1208.6 S/s (1h)
[2017-01-11 18:39:53.009] [info] [GPU3]  162.0 I/s 299.6 S/s (5s) 160.8 I/s 301.9 S/s (1m) 161.0 I/s 302.7 S/s (1h)
[2017-01-11 18:39:53.642] [info] [GPU2]  162.0 I/s 300.6 S/s (5s) 160.8 I/s 304.1 S/s (1m) 161.0 I/s 302.1 S/s (1h)
[2017-01-11 18:39:56.769] [info] [Total]  256.0 I/s 487.2 S/s (5s) 609.3 I/s 1145.8 S/s (1m) 643.5 I/s 1208.6 S/s (1h)
[2017-01-11 18:39:58.029] [info] [GPU3]  162.0 I/s 306.6 S/s (5s) 161.0 I/s 304.1 S/s (1m) 161.0 I/s 302.7 S/s (1h)
[2017-01-11 18:39:58.647] [info] [GPU2]  72.0 I/s 128.4 S/s (5s) 153.4 I/s 289.0 S/s (1m) 161.0 I/s 302.1 S/s (1h)
[2017-01-11 18:39:59.039] [info] [GPU3] Share accepted! (14816 / 14830)
[2017-01-11 18:40:01.555] [info] [GPU3] Share accepted! (14817 / 14831)
[2017-01-11 18:40:01.797] [info] [Total]  326.0 I/s 596.4 S/s (5s) 580.5 I/s 1088.9 S/s (1m) 643.5 I/s 1208.6 S/s (1h)
[2017-01-11 18:40:03.044] [info] [GPU3]  164.0 I/s 311.0 S/s (5s) 161.3 I/s 303.7 S/s (1m) 161.0 I/s 302.7 S/s (1h)
[2017-01-11 18:40:03.671] [info] [GPU2]  163.0 I/s 292.2 S/s (5s) 153.7 I/s 288.4 S/s (1m) 161.0 I/s 302.1 S/s (1h)
[2017-01-11 18:40:06.824] [info] [Total]  326.0 I/s 601.0 S/s (5s) 555.5 I/s 1039.9 S/s (1m) 643.5 I/s 1208.6 S/s (1h)
[2017-01-11 18:40:08.064] [info] [GPU3]  163.0 I/s 300.6 S/s (5s) 161.5 I/s 304.1 S/s (1m) 161.0 I/s 302.7 S/s (1h)
[2017-01-11 18:40:08.703] [info] [GPU2]  162.0 I/s 290.4 S/s (5s) 153.9 I/s 286.8 S/s (1m) 161.0 I/s 302.1 S/s (1h)
[2017-01-11 18:40:10.348] [info] [GPU2] Share accepted! (14818 / 14832)
[2017-01-11 18:40:11.529] [info] [GPU3] Share accepted! (14819 / 14833)
[2017-01-11 18:40:11.837] [info] [Total]  321.0 I/s 595.6 S/s (5s) 529.7 I/s 990.6 S/s (1m) 643.5 I/s 1208.6 S/s (1h)

[optiminer]

First of all, thank you optiminer for your work with this miner. It is by far the highest performing one. However it behaves a bit erratically. For example, I use a rig with 4x290x cards (actually it's 2x295x2s) and without apparent reason, it stopped mining on two of them at one point. The cards are rock solid stable and they've never skipped a beat with Claymore's miner or previous scrypt miners. Please see the log below in case you have any suggestions   (do note that from 18:39, only 2 GPUs seem to be mining anymore)

So far all reported GPU hangs turned out to be hardware related and usually required a reboot to get the GPUs running again. I suggest to try the watchdog feature.

[sorry2xs]

is the dev fee classified info

[LiOoO]

Version 1.3.2 released!

This is a bugfix release. No change in speed expected!

[1.3.2] Support older versions of fgrlx again.
[1.3.2] Fix abort when failing to list devices of platform.
[1.3.2] Fix no reconnect after 'No such host' errors.
[1.3.2] Add --benchmark options.

I found miner couple of times  crashed when internet connection is lost...
There is some bug or I'm doing something wrong?

I have small farm with close to 100 GPUs, and restarting is not solution for me because i don't have dummy plugs on my rigs.
If i don't connect monitor to first GPU, rigs will fail to restart.
I noticed that 100% of time when miner is stuck is when internet connection is lost! It says internet connection to server is lost, miner is trying to reconect and usually then miner crashes... I like speed of miner and stability when there is no problem with internet connection. Please fix this bug so i can use your miner!

[m1n1ngP4d4w4n]

Version 1.3.2 released!

This is a bugfix release. No change in speed expected!

[1.3.2] Support older versions of fgrlx again.
[1.3.2] Fix abort when failing to list devices of platform.
[1.3.2] Fix no reconnect after 'No such host' errors.
[1.3.2] Add --benchmark options.

I found miner couple of times  crashed when internet connection is lost...
There is some bug or I'm doing something wrong?

I have small farm with close to 100 GPUs, and restarting is not solution for me because i don't have dummy plugs on my rigs.
If i don't connect monitor to first GPU, rigs will fail to restart.
I noticed that 100% of time when miner is stuck is when internet connection is lost! It says internet connection to server is lost, miner is trying to reconect and usually then miner crashes... I like speed of miner and stability when there is no problem with internet connection. Please fix this bug so i can use your miner!

You have close to 100GPU farm and you don't have a proper monitoring/reboot system ? If miner fail in any way, you should have automated script/app/hardwares that reboot your stuff soft or hard or take appropriate software action (kill/restart miners, and so on). Also why not fix internet connection ?

[LiOoO]

Version 1.3.2 released!

This is a bugfix release. No change in speed expected!

[1.3.2] Support older versions of fgrlx again.
[1.3.2] Fix abort when failing to list devices of platform.
[1.3.2] Fix no reconnect after 'No such host' errors.
[1.3.2] Add --benchmark options.

I found miner couple of times  crashed when internet connection is lost...
There is some bug or I'm doing something wrong?

I have small farm with close to 100 GPUs, and restarting is not solution for me because i don't have dummy plugs on my rigs.
If i don't connect monitor to first GPU, rigs will fail to restart.
I noticed that 100% of time when miner is stuck is when internet connection is lost! It says internet connection to server is lost, miner is trying to reconect and usually then miner crashes... I like speed of miner and stability when there is no problem with internet connection. Please fix this bug so i can use your miner!

You have close to 100GPU farm and you don't have a proper monitoring/reboot system ? If miner fail in any way, you should have automated script/app/hardwares that reboot your stuff soft or hard or take appropriate software action (kill/restart miners, and so on). Also why not fix internet connection ?

I have few places with rigs... On one of them Internet connection drops every few hours...