[DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!!

[tytanick]

Hi,
Right now it has simple webpage that you can only monitor rigs.
But there will be also more advanced webpage for makins some basic actions like turn off or on.
Right now complete managment can be done only from windows via SRR Tool application.

Thx
I guess its paying off slowly but i am happy that i could made life easier for many people

[1715676239]

1715676239

[1715676239]

1715676239

[1715676239]

1715676239

[bensam1231]

If you're looking for a small side project that might be up your alley and probably would sell, there aren't many options for line voltage level control over actual fans used for ventilation. Right now I use things like greenhouse controls, which surprisingly aren't that advanced. So for instance with a motherboard, you can setup a temperature curve which will ramp up the fan speed based on temperature. Ventiliation fans don't have anything like this. I've only seen one device and it doesn't work very good. Most of them take form of turn fan on/off based on temperature and depending on the difference in temperature. Ramping up fan speed isn't apparently a thing.

Even a more advanced fan on/off controller based on room temperature would be nice, but dynamic fan control would be great. We're talking about 120v fans. Right now I also use a variac to vary my fan speeds as well, although there are plenty of cheap digital variable fan speed controls (which depending on your fan can reduce the fan life or just not work at all).

[tytanick]

Nope, if miner hangs then OS shoudl do something.
My Resetter is here only if OS freezes and cant do anything about it.

New Firmware will be with Extension Boards Arrival. Still my developer is also really busy these dasy and this is gelling longer and longer to finish.
We just need to wait.

[Marvell1]

whats up with shipping on these to the usa, ordered 2 aug 6 still nit heard or seen anything

[tytanick]

whats up with shipping on these to the usa, ordered 2 aug 6 still nit heard or seen anything

Hi, all orders ordered before 9 August were shipped.
If you didnt received any email with tracking or package please write to me an email
shop@simplemining.net
With order number and your email. We will check it.

P.S i checked someone from USA with 2xSSR and in deed the package was sent at 10 August and today at 18 August it just arrived to Your country....
EMS courier sometimes failing

[Marvell1]

looks like its arriving by the end of the week thanks for the update

[Marvell1]

got my 2 SRR V2 today they work great

I still have not been able to figure out to get the watchdog deal working on windows 10

The confusing part to me is it says the watchdog Agent needs to be in the same directoroy as the SRRTool

does the SRR tool automatically install the watchdog on rigs it is connected to ? or do you have to install the watchdog manually on each Rig ?

Not that I can install the Agent anyways, even after I unblock the app on the main computer I am using to manage rigs I see this when I try to run it

Code:

"Cannot start service from the command line or debugger. A windows Service must first be installed(using installutil.exe) 
and then started with the ServerExplorer, Windows Services Administrative tool or the NET START command. "

I asked about this in the past and never got a satisfactory answer any ideas ?

[tytanick]

Hi, first of all dont run SRR Agent.exe
You should copy both files on each windows rig.
Then you need to RUN SRR Tool.exe on each rig.
Then you need to connect to SRR, set options on the right where you see Agent fields.
Then you just enter serial of the SRR and slot that this particular rig is connected to.
Then press Save and then Install.
Also after that its good to open services.msc , Search for SRR Agent adn change "delayed startup" to normal one.
After that the Agent will be starting on this rig automatically and start sending packets to SRR Device.
After you set all rigs you can turn ON watchdog in SRR Tool.
You can do that by setting for example 120-250 in watchdog delay field.
Then the watchdog will restart each rig that didnt sent keepallive packets within 120-250 seconds
If you will still have problem, please write to admin@simplemining.net with team viewer informations, i can enter and help you but please try it first yourself

[Marvell1]

Hi, first of all dont run SRR Agent.exe
You should copy both files on each windows rig.
Then you need to RUN SRR Tool.exe on each rig.
Then you need to connect to SRR, set options on the right where you see Agent fields.
Then you just enter serial of the SRR and slot that this particular rig is connected to.
Then press Save and then Install.
Also after that its good to open services.msc , Search for SRR Agent adn change "delayed startup" to normal one.
After that the Agent will be starting on this rig automatically and start sending packets to SRR Device.
After you set all rigs you can turn ON watchdog in SRR Tool.
You can do that by setting for example 120-250 in watchdog delay field.
Then the watchdog will restart each rig that didnt sent keepallive packets within 120-250 seconds
If you will still have problem, please write to admin@simplemining.net with team viewer informations, i can enter and help you but please try it first yourself

I'll give it a shot, thanks

[farmtester1]

Site is not working properly? I can't register or access main pages.

[tytanick]

Site is not working properly? I can't register or access main pages.

Nope i didnt see any problem. Its fully working.
Try different browser or different internet connection meaby ?

[cashen]

I have a version 1 and need to expand.

[kr3st]

I have everything set up correct but when I go to open the .exe it doesn't see my SRR on my network.

It did at first, but it doesn't anymore. Any reason why it's not showing up?

[kr3st]

This resetter is super, but i dont know how to connect from my office to my home without teamviewer - different IP or for now is only for local network.

Do you have multiple mining rigs? You can install the software on all your mining rig. If one goes down, teamviewer into another rig to reset the one that's down.

You can forward default port (udp_ to external IP if you have static one. Then you could connect from internet.

I need to do this! Just need to know how to get the .exe to see the SRR on my netowrk. It did at first, now it's gone.

[tytanick]

This resetter is super, but i dont know how to connect from my office to my home without teamviewer - different IP or for now is only for local network.

Do you have multiple mining rigs? You can install the software on all your mining rig. If one goes down, teamviewer into another rig to reset the one that's down.

You can forward default port (udp_ to external IP if you have static one. Then you could connect from internet.

I need to do this! Just need to know how to get the .exe to see the SRR on my netowrk. It did at first, now it's gone.

Be sure you disabled all other connection interfaces than LAN.
So disable all virtualbox, and wifi. See if it will help.

[kr3st]

This resetter is super, but i dont know how to connect from my office to my home without teamviewer - different IP or for now is only for local network.

Do you have multiple mining rigs? You can install the software on all your mining rig. If one goes down, teamviewer into another rig to reset the one that's down.

You can forward default port (udp_ to external IP if you have static one. Then you could connect from internet.

I need to do this! Just need to know how to get the .exe to see the SRR on my netowrk. It did at first, now it's gone.

Be sure you disabled all other connection interfaces than LAN.
So disable all virtualbox, and wifi. See if it will help.

It's not working. How can I factory reset it? Is there a download to flash it back to stock and wipe out all of the config that's on it?

When I find the IP on the network and go into it with the IP and everything I get an error.

'Error while getting info from device'

[tytanick]

It's not working. How can I factory reset it? Is there a download to flash it back to stock and wipe out all of the config that's on it?
When I find the IP on the network and go into it with the IP and everything I get an error.
'Error while getting info from device'

There is no factory reset feature (no need for that).
Please write to admin@simplemining.net - i will help you debugging whats wrong via Team Viewer.
But first be sure you have LAN connection (not Wifi

[kr3st]

It's not working. How can I factory reset it? Is there a download to flash it back to stock and wipe out all of the config that's on it?
When I find the IP on the network and go into it with the IP and everything I get an error.
'Error while getting info from device'

There is no factory reset feature (no need for that).
Please write to admin@simplemining.net - i will help you debugging whats wrong via Team Viewer.
But first be sure you have LAN connection (not Wifi

So on my main computer, I can no longer see the SRR. But I made a new rig running windows and it sees the device fine. Why is that the case?

I'd like to see it on the computer I use to monitor all my rigs and do my main work on.

Also if someone can make a guide on how to host it to the web so I can access it from anywhere I will pay for your time!

[kr3st]

It's not working. How can I factory reset it? Is there a download to flash it back to stock and wipe out all of the config that's on it?
When I find the IP on the network and go into it with the IP and everything I get an error.
'Error while getting info from device'

There is no factory reset feature (no need for that).
Please write to admin@simplemining.net - i will help you debugging whats wrong via Team Viewer.
But first be sure you have LAN connection (not Wifi

So on my main computer, I can no longer see the SRR. But I made a new rig running windows and it sees the device fine. Why is that the case?

I'd like to see it on the computer I use to monitor all my rigs and do my main work on.

Also if someone can make a guide on how to host it to the web so I can access it from anywhere I will pay for your time!

Emailed. Hoping to get this figured out.

[tytanick]

Enter activation key:



When I go to the IP address of the device. What is the activation key?

Lol what ?
I see that first time in my life.
Its not SRR feature.
Meaning its not mine, where do yo usee that ?