[DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!!

[philipma1957]

great! i am really happy to see your product will start shipping!

Look forward to some demos of it.

I need to decide what I am going to do with my setup.

What do you mean by deciding about your setup ? i dont understand ?

I will give a longer explanation
In the morning

[1715056019]

1715056019

[1715056019]

1715056019

[1715056019]

1715056019

[1715056019]

1715056019

[1715056019]

1715056019

[dance191]

Ok guys.
Today i received first batch if RigResetters (i cant tell exact number but below is photo with some of it
Next days i wil be informing more fequent about status and start shipping  date

Any update on when you might start shipping?  Say I placed an order today for SRR and a few cables.  Any estimate on when it would ship?

Thanks, this looks like a great product!

[tytanick]

Ok guys.
Today i received first batch if RigResetters (i cant tell exact number but below is photo with some of it
Next days i wil be informing more fequent about status and start shipping  date

Any update on when you might start shipping?  Say I placed an order today for SRR and a few cables.  Any estimate on when it would ship?

Thanks, this looks like a great product!

Yes. I am planning to start packing on tuesday by rule first in first out.
Anyway i had unplanned problem. I Ordered from two different warehouses Quoltec power supplies and there is bad part of those power suppies.
50% of them are like this: https://www.youtube.com/watch?v=YA-cF3Aym7M
I wont be sending quolted power supplies then and i will return all of the.
Anyway on monday.tuesday i will have totally different product and lets hope ewerything will be smooth so i could start shipping
Anyway those power supplies are little more expensive but its on me. So we are on finish

[citronick]

Ok guys.
Today i received first batch if RigResetters (i cant tell exact number but below is photo with some of it
Next days i wil be informing more fequent about status and start shipping  date

Any update on when you might start shipping?  Say I placed an order today for SRR and a few cables.  Any estimate on when it would ship?

Thanks, this looks like a great product!

Yes. I am planning to start packing on tuesday by rule first in first out.
Anyway i had unplanned problem. I Ordered from two different warehouses Quoltec power supplies and there is bad part of those power suppies.
50% of them are like this: https://www.youtube.com/watch?v=YA-cF3Aym7M
I wont be sending quolted power supplies then and i will return all of the.
Anyway on monday.tuesday i will have totally different product and lets hope ewerything will be smooth so i could start shipping
Anyway those power supplies are little more expensive but its on me. So we are on finish

my order did not require any power supplies, because I will provide my own power supply.

So my order can ship first? 

[tytanick]

Ok guys.
Today i received first batch if RigResetters (i cant tell exact number but below is photo with some of it
Next days i wil be informing more fequent about status and start shipping  date

Any update on when you might start shipping?  Say I placed an order today for SRR and a few cables.  Any estimate on when it would ship?

Thanks, this looks like a great product!

Yes. I am planning to start packing on tuesday by rule first in first out.
Anyway i had unplanned problem. I Ordered from two different warehouses Quoltec power supplies and there is bad part of those power suppies.
50% of them are like this: https://www.youtube.com/watch?v=YA-cF3Aym7M
I wont be sending quolted power supplies then and i will return all of the.
Anyway on monday.tuesday i will have totally different product and lets hope ewerything will be smooth so i could start shipping
Anyway those power supplies are little more expensive but its on me. So we are on finish

my order did not require any power supplies, because I will provide my own power supply.

So my order can ship first? 

Will see

[cuongtn]

My simpler solution, just cost $20 in my country with arduino module and 30 mins read document and do code, can reset 45+ rigs, can extend to unlimited rigs with register shift.
Have webserver and api too.
https://i.imgur.com/Yfw3G0T.jpg

[tytanick]

My simpler solution, just cost $20 in my country with arduino module and 30 mins read document and do code, can reset 45+ rigs, can extend to unlimited rigs with register shift.
Have webserver and api too.

Yah but its dangerous solution.
If one rig will have power problem like shor curcuit, all your rigs will burn (motherboards). Just for you to know.

[cuongtn]

Yah but its dangerous solution.
If one rig will have power problem like shor curcuit, all your rigs will burn (motherboards). Just for you to know.
[/quote]

I think you don't understand what this thing does.
Everyone one can do same, just little time research about arduino + ethernet module + optocouplers + few hours to learn to code from begin, it connected direct to mainboard on power/reset pin.
I used it for my webserver to manager ~ 120 rigs already 6 month, then possible 300+ in this year without problem.

[tytanick]

Yah but its dangerous solution.
If one rig will have power problem like shor curcuit, all your rigs will burn (motherboards). Just for you to know.

I think you don't understand what this thing does.
Everyone one can do same, just little time research about arduino + ethernet module + optocouplers + few hours to learn to code from begin, it connected direct to mainboard on power/reset pin.
I used it for my webserver to manager ~ 120 rigs already 6 month, then possible 300+ in this year without problem.
[/quote]
I know exactly what i am talking about
That why we use opto transistors and not cheap ones for "shorting pins".

[citronick]

Tytanick -- is it possible to show reset counter per rig in the GUI?

I would like to know which rig has high reset count.

This will give me some idea on which rig needs HW troubleshooting (riser, power issues, etc.).

By doing this, I can prevent PSU going bad if reset is triggered too many times OR loops indefinitely.

Thanks

[cuongtn]

Yah but its dangerous solution.
If one rig will have power problem like shor curcuit, all your rigs will burn (motherboards). Just for you to know.

I think you don't understand what this thing does.
Everyone one can do same, just little time research about arduino + ethernet module + optocouplers + few hours to learn to code from begin, it connected direct to mainboard on power/reset pin.
I used it for my webserver to manager ~ 120 rigs already 6 month, then possible 300+ in this year without problem.

I know exactly what i am talking about
That why we use opto transistors and not cheap ones for "shorting pins".

[/quote]

Sorry for make you disappointed.
https://i.imgur.com/PDfTgLZg.png
They cheap and fast, easy to deploy. It's time for IoT, don't make thing hard when it's not big deal.

[kemo6600]

Where are you shipping from , i am located in EGYPT and will ship to PO box , i have some located in Europe , USA , ASIA , what would be the cheapest country for you to ship to ?

[tytanick]

Tytanick -- is it possible to show reset counter per rig in the GUI?
I would like to know which rig has high reset count.
This will give me some idea on which rig needs HW troubleshooting (riser, power issues, etc.).
By doing this, I can prevent PSU going bad if reset is triggered too many times OR loops indefinitely.
Thanks

This would be SimpleMining OS feature, and yes, it is good idea. Meaby even history of resets.
Anyway now you can check from time to time "uptime status" - if you often see some rig that has <1h uptime then you know

Sorry for make you disappointed.
They cheap and fast, easy to deploy. It's time for IoT, don't make thing hard when it's not big deal.

OK, good luck then.

Where are you shipping from , i am located in EGYPT and will ship to PO box , i have some located in Europe , USA , ASIA , what would be the cheapest country for you to ship to ?

I am from Poland and i am shipping from there. From cheapest to more expensive:
Poland
Slovakia and Czech Republic
Europe Union

Anyway be fast. I will be closing pre-order prices very soon as i am start sending some packages today.
So the normal price will be +20$ from this price.

Anyway way i have good news about those Extension Packs that i am developing now.
I dont have it confirmed ( i will when we check it in production) but most propably you could connect not 2 but even 10 Extension Boards to ONE RigResetter (
It will lower costs for big farms

[deadsix]

My simpler solution, just cost $20 in my country with arduino module and 30 mins read document and do code, can reset 45+ rigs, can extend to unlimited rigs with register shift.
Have webserver and api too.

I'm working on something exactly like this right now But we owe the orignal idea to tytanick. Ofcource it will be cheaper to do it on your own, but then not everyone has the time/energy/aptitude to build an arduino module for this purpose, which is where an easy to order easy to use module like this one from tytanick comes in.

[tytanick]

I'm working on something exactly like this right now But we owe the orignal idea to tytanick. Ofcource it will be cheaper to do it on your own, but then not everyone has the time/energy/aptitude to build an arduino module for this purpose, which is where an easy to order easy to use module like this one from tytanick comes in.

Exactly. You can make smartphone by yourself if you know how to, and it wil be cheaper, yet still people are buying iPhones

[tytanick]

UPDATE.
Today first packages went to my polish friends to check if i didnt forgot anything.
Tomorrow i will be making VAT Invoices for orders placed in January and sending them to people who ordered SRR.
Next i will try to ship some packages to Rest of the World to see if shipping process to World is ok and i didnt miss anything.
Then i will start writing instructions, howtos and videos (meaby videos later).
Anyway i have all cables, power supplies and resetters prepared so now sending process will be smooth.
Also i will email to everyone who ordered status and tracking link (if possible ofcourse).

[citronick]

UPDATE.
Today first packages went to my polish friends to check if i didnt forgot anything.
Tomorrow i will be making VAT Invoices for orders placed in January and sending them to people who ordered SRR.
Next i will try to ship some packages to Rest of the World to see if shipping process to World is ok and i didnt miss anything.
Then i will start writing instructions, howtos and videos (meaby videos later).
Anyway i have all cables, power supplies and resetters prepared so now sending process will be smooth.
Also i will email to everyone who ordered status and tracking link (if possible ofcourse).

congratulations Tytanick and thanks for sharing this project to mining community -- looking forward to get my package soon.

[vlcmstne]

Exciting lol

[xleejohnx]

UPDATE.
Today first packages went to my polish friends to check if i didnt forgot anything.
Tomorrow i will be making VAT Invoices for orders placed in January and sending them to people who ordered SRR.
Next i will try to ship some packages to Rest of the World to see if shipping process to World is ok and i didnt miss anything.
Then i will start writing instructions, howtos and videos (meaby videos later).
Anyway i have all cables, power supplies and resetters prepared so now sending process will be smooth.
Also i will email to everyone who ordered status and tracking link (if possible ofcourse).

cant wait to do a full review for you over this product!!!!

[tytanick]

cant wait to do a full review for you over this product!!!!

Me too