Review of Panda Miner coming up.

[Eliovp]

of course bad cables would cause a melt down.  If they are too thin to handle the amps.  But an improper connection as in loose on the pins would cause the same thing.  I bought extra plugs to combat this lol.

well the 2 split cable are pulling more juice on less wire.

and if the pins are flawed in the least  it is a double stress test on 2 cables and 4 sets of pins.

So look for more of it to happen  as the summer heats up.

Or you:

1. Do NOT dual mine
2. Use a decent rom so the gpu's don't require a shitton of power

No issues whatsoever so far.

[1715345754]

1715345754

[1715345754]

1715345754

[1715345754]

1715345754

[vapourminer]

Or you:

1. Do NOT dual mine
2. Use a decent rom so the gpu's don't require a shitton of power

No issues whatsoever so far.

seems like a poor way to make a miner. stock it should be able to handle dual mining, or any other algo you toss at it.

its like buying a sports car and them telling you "oh yeah, dont drive over 75 mph and also you will need this special, extra cost engine computer to do it."

if i can dual mine on my home built rigs, i would think a professionally built miner could do the same.

[drsub]

Did anyone that purchase on Apri20-22 got their tracking number yet?

[dagarair]

of course bad cables would cause a melt down.  If they are too thin to handle the amps.  But an improper connection as in loose on the pins would cause the same thing.  I bought extra plugs to combat this lol.

well the 2 split cable are pulling more juice on less wire.

and if the pins are flawed in the least  it is a double stress test on 2 cables and 4 sets of pins.

So look for more of it to happen  as the summer heats up.

Or you:

1. Do NOT dual mine
2. Use a decent rom so the gpu's don't require a shitton of power

No issues whatsoever so far.

I am using your mod and NOT dual mining fool!  LOL 

It's 100% the heat.  Since Eliovp lives in the fookin ice he would never see this.

[philipma1957]

of course bad cables would cause a melt down.  If they are too thin to handle the amps.  But an improper connection as in loose on the pins would cause the same thing.  I bought extra plugs to combat this lol.

well the 2 split cable are pulling more juice on less wire.

and if the pins are flawed in the least  it is a double stress test on 2 cables and 4 sets of pins.

So look for more of it to happen  as the summer heats up.

Or you:

1. Do NOT dual mine
2. Use a decent rom so the gpu's don't require a shitton of power

No issues whatsoever so far.

I am using your mod and NOT dual mining fool!  LOL  

It's 100% the heat.  Since Eliovp lives in the fookin ice he would never see this.

yeah it is part of the reason I sold the first one and did not buy more.  I know I would over heat for the summer.

you have 240 power why not get the server psu and use 7 wires.  the 1200 model would work.

[VoskCoin]

http://www.mouser.com/ProductDetail/Molex/45732-0001/?qs=sGAEpiMZZMs%252bGHln7q6pm0yYNlAgQWB%2fw9pdNaIn3qc%3d

Mouser has them.  I just had to make a repair like that on one of my B1's.  FYI it's a total whore to fix, take your time.

were you using the POS  oem psu?

Phillip what PSU do you rec for these?

I had great success with this one

http://www.ebay.com/itm/Rosewill-TOKAMAK-1500W-Full-Modular-Power-Supply-80-PLUS-TITANIUM-Certified-/172455843785?

 evga 1600 t2
 rosewill tokamak 1500w titanium
 evga 1600 p2
 evga 1600 g2

all of the above are good the rosewill is very good value


evga 1300 g2 --------- do not max the gpus

https://www.amazon.com/Corsair-AX1500i-Modular-Titanium-Certified/dp/B00MFJ4OBA/ref=sr_1_6?ie=UTF8&qid=1495561251&sr=8-6&keywords=1600w+power+supply

would this work well ? it's on prime xD

[drsub]

PandaMiner are out of AMD GPU. Shipments will be delayed 

[philipma1957]

http://www.mouser.com/ProductDetail/Molex/45732-0001/?qs=sGAEpiMZZMs%252bGHln7q6pm0yYNlAgQWB%2fw9pdNaIn3qc%3d

Mouser has them.  I just had to make a repair like that on one of my B1's.  FYI it's a total whore to fix, take your time.

were you using the POS  oem psu?

Phillip what PSU do you rec for these?

I had great success with this one

http://www.ebay.com/itm/Rosewill-TOKAMAK-1500W-Full-Modular-Power-Supply-80-PLUS-TITANIUM-Certified-/172455843785?

 evga 1600 t2
 rosewill tokamak 1500w titanium
 evga 1600 p2
 evga 1600 g2

all of the above are good the rosewill is very good value


evga 1300 g2 --------- do not max the gpus

https://www.amazon.com/Corsair-AX1500i-Modular-Titanium-Certified/dp/B00MFJ4OBA/ref=sr_1_6?ie=UTF8&qid=1495561251&sr=8-6&keywords=1600w+power+supply

would this work well ? it's on prime xD

it is 100 more then the rosewill I linked.

but it will work.

Having used all the psu's above.

 I would get the evga 1300 g2 and not run the gear hard. >>>>>>
or get the rosewill i linked if I was looking to run a bit harder >>>>>

I would not get the evga 1600 t2 or the corsair simply due to the cost .  but if you have them on hand use them.

[Smuft]

Did anyone that purchase on Apri20-22 got their tracking number yet?

no, still waiting

they said they are waiting for power supplies to arrive and that the shipment will go out this week 100%

i'm not holding my breath

[VoskCoin]

Hey everyone I'm having a problem with my pandaminer b3+

It is only hashing at 215 mh/s

https://youtu.be/lOh6hgTRYBY here's a video showing my setup with it. . I know it's not ideal but it should still be working properly

[philipma1957]

I want to buy this product.

zzhttp://minezzhop.zet/bitcoin-miners?product_id=54 (PandaMiner) Do you recommend it?

I deleted this as I suspect it is a scam

[torontobitcoinmanager]

Did everyone get their shipment from April 14th or before?
I only got 20 units today out of 50 and should be praying to get the remaining shipped by the end of the month.
This is completely f..ked up. Hoping to get by Christmas when POS is done. Anyone else is in similar circumstances?

[VoskCoin]

Phil in your post here your pandaminer looks different than mine here in my pandaminer review
https://youtu.be/sefJNg8Bv5I

But it also looks different than the panda dagair has . .

It looks different than the panda that I just received


Any information on these different "models" of the same miner?

[torontobitcoinmanager]

Did everyone get their shipment from April 14th ?
I only got 20 units today out of 50 and should be praying to get the remaining shipped by the end of the month.
This is completely f..ked up. Hoping to get by Christmas when POS is done. Anyone else is in similar circumstances?

[VoskCoin]

Who is using an oem panda PSU

If you are on 240v or 220v?

[fullzero]

Did everyone get their shipment from April 14th ?
I only got 20 units today out of 50 and should be praying to get the remaining shipped by the end of the month.
This is completely f..ked up. Hoping to get by Christmas when POS is done. Anyone else is in similar circumstances?

Why are members still pre-ordering equipment? 

This kind of nonsense will continue until everyone stops pre-ordering. 

[bentcrypto]

Did everyone get their shipment from April 14th ?
I only got 20 units today out of 50 and should be praying to get the remaining shipped by the end of the month.
This is completely f..ked up. Hoping to get by Christmas when POS is done. Anyone else is in similar circumstances?

Why are members still pre-ordering equipment? 

This kind of nonsense will continue until everyone stops pre-ordering. 

Fullzero...that is an old post you are quoting(and good luck to torontoBTCmanager).
Given the video card shortage ATM no one is pre-ordering from Pandaminer. As far as I know they could not even sell the "new" NV1060 pandaminer model.

[fullzero]

Did everyone get their shipment from April 14th ?
I only got 20 units today out of 50 and should be praying to get the remaining shipped by the end of the month.
This is completely f..ked up. Hoping to get by Christmas when POS is done. Anyone else is in similar circumstances?

Why are members still pre-ordering equipment? 

This kind of nonsense will continue until everyone stops pre-ordering. 

Fullzero...that is an old post you are quoting(and good luck to torontoBTCmanager).
Given the video card shortage ATM no one is pre-ordering from Pandaminer. As far as I know they could not even sell the "new" NV1060 pandaminer model.

This thread announced itself to me yesterday; and I didn't look at the date.  Pre-order scams / excessively late shipments have been occurring over and over again in crypto since custom hardware began to be produced.

I hope torontoBTCmanager has already received the miners he ordered.

[Liquid71]

This thread announced itself to me yesterday; and I didn't look at the date.  Pre-order scams / excessively late shipments have been occurring over and over again in crypto since custom hardware began to be produced.

I hope torontoBTCmanager has already received the miners he ordered.

Giga Watt has panda miners and they are trustworthy. They are mining hosting company, you can check them out by searching CEO on coindesk for articles about his history in the industry https://www.coindesk.com/?s=dave+carlson
And Panda miner scheduled to go online sept 10 https://www.gigawatt.sg/product-category/gpu-miners/

You have to be a WTT token holder to buy, the tokens lock in 3.3c kwh. You only need one token and you could buy the miner then rent tokens from others or pay the retail rate for hosting. If you want to lock in the 3.3c kwh and avoid hosting fees 1375 WTT tokens. 1250 watts plus 10%, you know how miners say +/- 10% well you need the extra tokens to cover the 10%. The ICO is still going so you can still get tokens http://alturl.com/ugese
And their youtube and instagram pages show build out going fast https://www.instagram.com/gigawatt_mining/

If you are planning to mine ETH just know that the rx470 hashrate is dropping because it's 4GB not 8GB, still profitable especially when operating costs are 3.3c kwh but something to keep in mind, I know a lot of people are only interested in ETH even though there are a ton of profitable coins to mine.
Anyway that's the only reputable place I know selling panda miners. Everywhere else is scammers. Before I found giga watt had them in stock I was refreshing panda miners website ten times a day lol.

[philipma1957]

I think I have done the ENG pack but its still mostly Mandarin to me.

Guys - I missed major part on difficulties with Win 10 Ent and language packs.

But reading Russian forum I did not notice that.

They installed Russia language with no problem

Пoжaлyйтca пpишлитe ccылкy нa pyccкyю вeткy!!

I deleted this because I can not read it.  I quoted it and will get it translated.

it may mean please send a link to the russian branch