jackcantrell
Newbie
Offline
Activity: 28
Merit: 0
|
|
January 24, 2017, 03:13:59 AM |
|
Here's a video I made today showing comparison of T-9 11.5 vs. S-9 12.0 variable frequency power draw at the wall. Uses more power, but runs cooler. At 210 VAC T-9 uses 1352 W, hashes at 11.5, highest chip temp 80C S-9 uses 1329 W, hashes at 12.0, highest chip temp 94C https://www.youtube.com/watch?v=yHJzo7A312cThanks for the video Jack. How strange the S9 is using so much more power than the stated specs on the web site. I think they quoted something like 1079w for the 12th S9 so that is significantly above the spec. Really looks like the T9 may be a winner then just based on the cooler temps and the power use looks like it isn't as bad as was stated in the spec for that unit. Good to know! The T9 may turn out to be a good unit! Please keep us posted. Well, in the first video I made I compared it to a 550 fixed frequency S-9 at 11.85 TH. The older 550 speed S-9 used only 1178 watts. I think when Bitmain changed to variable frequency they didn't update the specs on the S-9
|
|
|
|
mamiakimo
|
|
January 24, 2017, 09:24:17 AM |
|
Here's a video I made today showing comparison of T-9 11.5 vs. S-9 12.0 variable frequency power draw at the wall. Uses more power, but runs cooler. At 210 VAC T-9 uses 1352 W, hashes at 11.5, highest chip temp 80C S-9 uses 1329 W, hashes at 12.0, highest chip temp 94C https://www.youtube.com/watch?v=yHJzo7A312cwhats is you room temp ? and S9 batch ? because latest batches have less temp than earlier one
|
|
|
|
Danimore
Full Member
Offline
Activity: 294
Merit: 123
The World’s First Blockchain Core
|
|
January 24, 2017, 09:30:37 AM |
|
I have just watched this miner. I feel very impressive with this batch of antminer. I will buy it in next month after I got my salary.
|
|
|
|
jackcantrell
Newbie
Offline
Activity: 28
Merit: 0
|
|
January 24, 2017, 01:43:17 PM |
|
Here's a video I made today showing comparison of T-9 11.5 vs. S-9 12.0 variable frequency power draw at the wall. Uses more power, but runs cooler. At 210 VAC T-9 uses 1352 W, hashes at 11.5, highest chip temp 80C S-9 uses 1329 W, hashes at 12.0, highest chip temp 94C https://www.youtube.com/watch?v=yHJzo7A312cwhats is you room temp ? and S9 batch ? because latest batches have less temp than earlier one It was the S9 batch 16 available in about November 2016. Room temp was about 60 deg F
|
|
|
|
kurbeks
|
|
January 24, 2017, 03:12:23 PM |
|
yup really looks like realiabilty is finally fixed. Instea dof trying to push to limits and then dying like flies
|
|
|
|
NotFuzzyWarm
Legendary
Offline
Activity: 3780
Merit: 2681
Evil beware: We have waffles!
|
|
January 24, 2017, 04:19:40 PM |
|
yup really looks like reliability is finally fixed. Instead of trying to push to limits and then dying like flies
Ah the time frames of Youth... A few miners with a few days of run time on them does not equal better reliability than a s9. Most folks have zero trouble with the s9's at the start (and minimal issues during its lifetime). Out of the 16 s9's starting from batch-1 that I have, only 2 bad boards to date. At least give them a week, preferably > a month and THEN make that call... Now better than the latest R4's -- based on my 1 bad out of 3, so far I'll give ya that one.
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
|
January 24, 2017, 05:39:37 PM |
|
Just lit up a pair of T9 on DPS1200 PSUs. Meter estimates 2850W for the pair and one-hour reading of 23.43TH between 'em for an average of 0.121J/GH.
|
|
|
|
Colohub
|
|
January 24, 2017, 10:34:02 PM |
|
We went ahead and purchased 15 R4's and 20 of the T9's for our own operation. We will keep you guys updated and post some pics when they come in hopefully this week!
T9's and R4's have been since Friday/Monday! Here are a few pics of them http://imgur.com/a/vYxSj
|
|
|
|
takagari
Legendary
Offline
Activity: 1050
Merit: 1000
|
|
January 26, 2017, 01:35:59 AM |
|
We went ahead and purchased 15 R4's and 20 of the T9's for our own operation. We will keep you guys updated and post some pics when they come in hopefully this week!
T9's and R4's have been since Friday/Monday! Here are a few pics of them http://imgur.com/a/vYxSjVery clean and nice looking setup!
|
|
|
|
fanatic26
|
|
January 26, 2017, 01:45:27 AM |
|
We went ahead and purchased 15 R4's and 20 of the T9's for our own operation. We will keep you guys updated and post some pics when they come in hopefully this week!
T9's and R4's have been since Friday/Monday! Here are a few pics of them http://imgur.com/a/vYxSjLooks great. My question is why would you buy R4's for a datacenter installation where noise is not an issue? The cost per gh on the R4 is 30% higher than on an S9.
|
Stop buying industrial miners, running them at home, and then complaining about the noise.
|
|
|
Colohub
|
|
January 26, 2017, 03:22:57 PM |
|
We went ahead and purchased 15 R4's and 20 of the T9's for our own operation. We will keep you guys updated and post some pics when they come in hopefully this week!
T9's and R4's have been since Friday/Monday! Here are a few pics of them http://imgur.com/a/vYxSjLooks great. My question is why would you buy R4's for a datacenter installation where noise is not an issue? The cost per gh on the R4 is 30% higher than on an S9. At the time of purchasing the R4 was the only miner in stock. we picked up 10 of the 7.5's and 5 of the 8.7's. We were just itching to get some more miners/hashrate since before we bought these it had been roughly a month and a half since our last purchase.
|
|
|
|
eduardo_rc
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 27, 2017, 02:43:19 PM |
|
I received a T9 with what seems to be a defective fan. It starts hashing and soon it overheats. One of the fans does not go above 1900rpm.
|
|
|
|
kurbeks
|
|
January 27, 2017, 09:08:29 PM |
|
o boy and that is biggest ASIC manufacturer in world. If that comapny would be in EU or USA. it would have been shut down alredy, assets stripped, property confiscated.
|
|
|
|
in2tactics
|
|
January 30, 2017, 10:48:17 AM |
|
We went ahead and purchased 15 R4's and 20 of the T9's for our own operation. We will keep you guys updated and post some pics when they come in hopefully this week!
T9's and R4's have been since Friday/Monday! Here are a few pics of them http://imgur.com/a/vYxSjLooking nice!
|
Current HW: 2x Apollo, 2x Apollo BTC, 2x Apollo II Retired HW: 3x 2PAC, 3x Moonlander 2, 2x AntMiner S7-LN, 5x AntMiner U1, 2x ASICMiner Block Erupter Cube, 4x AntMiner S3, 4x AntMiner S1, GAW Black Widow, and ZeusMiner Thunder X6
|
|
|
johnnyc
Newbie
Offline
Activity: 26
Merit: 0
|
|
January 30, 2017, 01:40:28 PM |
|
T9s installed Saturday. So far so good.
|
|
|
|
cybermods
Member
Offline
Activity: 65
Merit: 10
Jack of all trades, master of none.
|
|
January 31, 2017, 01:10:58 AM |
|
My 3 T9s have been running 24/7 since the 23rd. No problems to report.
|
Keep calm and carry on mining.
|
|
|
eduardo_rc
Newbie
Offline
Activity: 21
Merit: 0
|
|
February 01, 2017, 08:02:34 PM |
|
Through week #1 today. So far so good. I wish i could change frequencies and fan speeds though.
Only complain was a "slow" fan wich was causing a miner to overheat. I had spare fans from a few S7 lying around, so problem was quickly fixed.
|
|
|
|
AriesIV10
Legendary
Offline
Activity: 1260
Merit: 1006
Mine for a Bit
|
|
February 08, 2017, 02:31:58 PM |
|
I think this forum topic is meeting its demise.
|
|
|
|
VRobb
|
|
February 08, 2017, 03:01:50 PM |
|
Funny, the tread is pretty dead because there aren't tons of us complaining about the high failure rate of our new miner (S9 or R4 thread anyone?)
Much like at a dinner table, if there's not a lot of talking the food is good!
|
I don't believe in superstition because it's bad luck: 13thF1oor6CAwyzyxXPNnRvu3nhhYeqZdc These aren't the Droids you're looking for: S5 & S7 (Sold), R4B2, R4B4 (RIP), 2x S9 obsolete, 2xS15-28, S17-56, S17-70 Pushing a whopping 1/5 PH! Oh The SPEED!!!
|
|
|
Longsnowsm
|
|
February 08, 2017, 04:02:47 PM |
|
I agree it seems like the T9 thread has been very quiet which really does imply that it addresses the S9/R4 issues. No one complaining yet so this is a good sign. But then again when the S9 first started shipping people were happy too.
So maybe another 30 days and we should probably have a good idea if there is going to be any fallout.
|
|
|
|
|