minerstat: mining OS + ASIC monitoring + Windows mining

[JFoxOne]

Orders
Due to frequency of such requests, we have decreased minimum number of workers per order from 5 to 3 workers.

ASIC HUB (Non-SSH)
Raspberry PI supported from now.

minerstat Console
For better security, remote SSH tunnel is now established only on request (when clicked on Remote IP) and disconnected after 60 minutes.

[coinscrow]

Windows Miner Update
claymore-eth v14.5

Windows Node Update
Improved Error Handling for MSI Afterburner (ClockTune) integration:
Corrects an issue when minerstat Windows crashed if AfterBurner v4.6 version were installed.  
Latest AfterBurner version still not supported because API access is Read-only.

To Update reinstall minerstat Windows or remove daemon.exe and start minerstat.exe to get the latest version.

Note: Silent update, no auto-update going to happen.

[coinscrow]

mOS Update
• Corrects an issue when DHCP was used instead of static IP configuration when static IP was selected in network.txt
• Updated wifi script to patch "found.o" issue
• Major benchmark corrections for AMD GPUs

Single Vega64 Benchmark with Medium OC on msOS:
https://minerstat.com/benchmark/dnldib5ve6

[JFoxOne]

Worker's profile

You can now apply ClockTune profile directly from worker's profile page.

[Dennicex]

Windows Miner Update
claymore-eth v14.5

Windows Node Update
Improved Error Handling for MSI Afterburner (ClockTune) integration:
Corrects an issue when minerstat Windows crashed if AfterBurner v4.6 version were installed.  
Latest AfterBurner version still not supported because API access is Read-only.

To Update reinstall minerstat Windows or remove daemon.exe and start minerstat.exe to get the latest version.

Note: Silent update, no auto-update going to happen.

I correctly understood that automatic updates should not wait? Why it happens? Is this an official update? How safe is it to update manually?

[coinscrow]

I correctly understood that automatic updates should not wait? Why it happens? Is this an official update? How safe is it to update manually?

What is the question?
Updates happen automatically, this means the version not changed so nodes will not auto update.
This for users who wanted to try minerstat, but they had v4.6 afterburner. Because afterburner/drivers are read-only not it is crashed, now it is protected.
But for ClockTune support need v4.5 afterburner to use.

We can answer your questions faster on our Discord

[coinscrow]

msOS Miner Update
trex v0.11.0 [CUDA 10.0]
trex v0.11.0 [CUDA 9.2]
gminer v1.43

Windows Miner Update
trex v0.11.0 [CUDA 10.0]
gminer v1.43

[coinscrow]

ASIC HUB Non-SSH (v0.3)
• Validate JSON before applying to the machine to avoid rare cases when miner pool settings were blank.

[coinscrow]

Greetings there everyone. I am pretty new to the industry, but aware that there are some product that are on the market to make the process easier. Bur is anyone around today to help me to get a bit deeper? Would highly appreciate some kind of assistance in here

Feel free to join our Discord. We are available to help in our work hours. (GMT+3)

[JFoxOne]

Have you noticed our simpler way to edit the config?

https://medium.com/@minerstat/mining-configuration-simple-vs-advanced-16447a132fad

[coinscrow]

msOS Update
Updated AMD Memory Tweak by Eliovp to the latest version.

To gain some speed (Similar effect to Claymore's RXBOOST) for your RX 4xx/5xx models (1-9%) you can set REF value to about 30.
You can change straps directly from https://my.minerstat.com/memory-tweak or by calling a command on msOS

Code:

amdmemtool --REF 30

If you discover any good value. Please, share with the developer and the community on his thread:
https://bitcointalk.org/index.php?topic=5123724.0

[coinscrow]

VEGA64, PHOENIX-ETH, ETH MINING - SOLID 45MH

Core clock: 1030Mhz
Memory clock: 1030Mhz
VDDC: 800mV

Straps on the picture, but most key values for speed:

Code:

amdmemtool --REF 7000 --CL 14 --FAW 12 --RP 10 --RFC 300 --RCDRD 16 --RCDWR 5

** EDIT: Increase --REF 7000 results in additional 0.6MH
(Who are trying REF values for RX560, 570, 580 seems --REF 30 were the best for me)

[coinscrow]

ASIC HUB (SSH)
Check miner config before applying to the machine to avoid rare cases when miner pool settings were blank because of a network timeout.

msOS Update
Better Error handling for any server outages
The agent from now will show a message on authentication error (Invalid Worker / AccessKey)
Shows more debug output (e.g: starting miner, killing ports ..)
Adjusted sync loop to start only after miner started.

[JFoxOne]

Benchmark

Added two new options - to delete individual benchmark row and to clear individual result.

Delete is helpful if benchmark keeps failing or if specific client is crashing your rig.
Clear result is helpful if you want to re-benchmark only few algos and you don't want to redo the whole list again.


Check all minerstat features.

[coinscrow]

Change of terms
We have made a change regarding expired paying accounts. Grace period is now 30 days (previously 3 days).
Workers will switch to offline mode after 3 days and get deleted along with account relevant data after 30 days.

[coinscrow]

msOS Update
New command: mswap
With this tool, you can increase your system Total memory with Virtual memory easily.

e.g to create 8GB of swap space Enter: mswap 8192

Note: Recommended for SSD / HDD.

msOS miner Update
gminer v1.44
wildrig-multi v0.17.0-beta

Windows Miner Update
gminer v1.44
wildrig-multi v0.17.0-beta

[JFoxOne]

Benchmark

We have added estimated time to benchmark so you can see how long benchmark will take to complete.

[coinscrow]

msOS Miner Update
claymore-eth v14.6
wildrig-multi v0.17.2-beta
z-enemy v2.0 [CUDA 9.2]
z-enemy v2.0  [CUDA 10.0]

Windows Miner Update
claymore-eth v14.6
wildrig-multi v0.17.2-beta
z-enemy v2.0  [CUDA 10.0]

[JFoxOne]

We are first to add (much hyped) VDS - VOLLAR mining calculator.

[coinscrow]

Windows Node Update (v4.1.2)
• Corrects a possible issue with Afterburner when every value was "skip" external profile still got applied.
• Benchmarking now saving states, so no need to click on  [Continue Benchmark]. If for some reason the Node restart itself.
• miniZ miner is fully supported from now (from v4.1.1)

This minor update currently not forced due to the impact were low on users.  Next auto-updating version will be the v4.2.  
If you want to get the latest changes:  remove "daemon.exe" after start "minerstat.exe".