[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[minerx117]

and another thing which is weird to me - I run 2 x 1070s and 2 x 1060 6GB.

I noticed that when zpool chooses c11 algo - the 1070s are way up there in the mh/s but the 1060's are only doing hk/s - do I have to set different intensities or something when I have different GPUs on the same rig?

i run both 1070's and 1060's with 1.7.2 have no issues 6x1070 rig 1x1060 pc ..
 

[newmz]

and another thing which is weird to me - I run 2 x 1070s and 2 x 1060 6GB.

I noticed that when zpool chooses c11 algo - the 1070s are way up there in the mh/s but the 1060's are only doing hk/s - do I have to set different intensities or something when I have different GPUs on the same rig?

i run both 1070's and 1060's with 1.7.2 have no issues 6x1070 rig 1x1060 pc ..
 

ok but I have 1 rig - it has both 2 1070's and 2 1060's on it - so I can't set accurate hashrates in the passwords because for example for equihash the 1070 will be 0.42 but the 1060 wil be 0.3. at all.

Another thing which is crazy right now is trying to use miningpoolhub - I think they might be getting ddos'd because I just can't log into them.

[JaredKaragen]

if they are same generation of cards;  it scales the same.

the scale of hashrate between 960-980ti is pretty linear when compared to the scale of a 1060-1080....   As long as you match generation; keep all the normalizations relative to the most present card in your system (if u have 2 1070, choose the 1070 normalization, etc).  I always pick the normalizations for the highest tiered card in the system.  My machine with a 960, and 980 gets the 980 norm.

I use my 1070 normalization on all of the 1080+ rigs I manage.

[minerx117]

ccminer-equihash tpruvot source code compiled by me:

Source Code: https://github.com/tpruvot/ccminer/tree/equihash

Windows Binary:  https://mega.nz/#F!hi4SUIrY!hqSSsMxCgXDJ_FjlgpDYNw

X64 Release compile from tpruvot source with vs2013 cuda 8.0 for compute 3.0-5.2

tested on gtx 1060 & 1070 100% stable no crashes

Best Regards
#Nemo

[PcChip]

Hi MinerX, 
 
for building a new rig, should I buy 2x 1080Ti's or 4x 1070's? 
 
they're roughly the same price brand new, although I don't know the performance/wattage on nvidia as well as I do the rx470/rx480 series

Thanks for any suggestions you have!

[minerx117]

i run 1070's i think they will have a better resale price wont lose as much compared to 1080ti.. gamers find it hard to pony up enough for a 1080ti most want the 1070.. in the end its up to you i believe there mhs per watt is similar..  

[merlinsbeard]

Really enjoying the program. Will donate once I break ROI

ccminer-equihash tpruvot source code compiled by me:

Source Code: https://github.com/tpruvot/ccminer/tree/equihash

Windows Binary:  https://mega.nz/#F!hi4SUIrY!hqSSsMxCgXDJ_FjlgpDYNw

X64 Release compile from tpruvot source with vs2013 cuda 8.0 for compute 3.0-5.2

tested on gtx 1060 & 1070 100% stable no crashes

Best Regards
#Nemo

So do you suggest we use this instead of zminer in nemosminer?

Also, do you think it's worth bothering with m7m, xevan, or hmq1725 (new) algorithms for pascal cards?

[minerx117]

Really enjoying the program. Will donate once I break ROI

ccminer-equihash tpruvot source code compiled by me:

Source Code: https://github.com/tpruvot/ccminer/tree/equihash

Windows Binary:  https://mega.nz/#F!hi4SUIrY!hqSSsMxCgXDJ_FjlgpDYNw

X64 Release compile from tpruvot source with vs2013 cuda 8.0 for compute 3.0-5.2

tested on gtx 1060 & 1070 100% stable no crashes

Best Regards
#Nemo

So do you suggest we use this instead of zminer in nemosminer?

no, EWBF is still the fastest for me and has 0% fee so i won't be changing to any version of ccminer for equihash anytime soon unless there is a speed improvement i simply compiled that version to help the development of ccminer-equihash..

Also, do you think it's worth bothering with m7m, xevan, or hmq1725 (new) algorithms for pascal cards?

m7m and xevan are cpu only algo's... im in the process of adding hmq1725 algo to 1.7.3-zpool atm will be uploaded later today..

Regards
Nemo

[merlinsbeard]

Really enjoying the program. Will donate once I break ROI

ccminer-equihash tpruvot source code compiled by me:

Source Code: https://github.com/tpruvot/ccminer/tree/equihash

Windows Binary:  https://mega.nz/#F!hi4SUIrY!hqSSsMxCgXDJ_FjlgpDYNw

X64 Release compile from tpruvot source with vs2013 cuda 8.0 for compute 3.0-5.2

tested on gtx 1060 & 1070 100% stable no crashes

Best Regards
#Nemo

So do you suggest we use this instead of zminer in nemosminer?

no, EWBF is still the fastest for me and has 0% fee so i won't be changing to any version of ccminer for equihash anytime soon unless there is a speed improvement i simply compiled that version to help the development of ccminer-equihash..

Also, do you think it's worth bothering with m7m, xevan, or hmq1725 (new) algorithms for pascal cards?

m7m and xevan are cpu only algo's... im in the process of adding hmq1725 algo to 1.7.3-zpool atm will be uploaded later today..

Regards
Nemo

You are the best! I look forward to 1.7.3 

[minerx117]

NemoMiner-v1.7.3-ZPOOL

replaced ccminerTanguy with ccminerTanguy : https://github.com/tpruvot/ccminer/releases    v2.0 Final version

added support for hmq1725 thanks to Tanguy

Regards
#Nemo

[sky62]

Thank you very good !!!

[xxtatooxx]

thanks man , i love this program ! I no longer need to take my head, it's so cool !

[merlinsbeard]

Working well, thank you.

I did a small mod to the .bat which lets you choose which GPU devices you want to utilize. Just put "-d 0,1", ect at DEV=

Code:

@echo off
SETLOCAL EnableExtensions
SET ADDY=
SET DEV=-d 1
SET A=ccminerAlexis78.exe
SET B=ccminerTanguy.exe
SET C=zminer.exe
SET D=ccminerAlexis78blakecoin
SET E=ccminerbitcore
SET POOL=mine.zpool.ca
REM SET A01=equihash
REM SET A02=lyra2z
SET A03=myr-gr
REM SET A04=x15
SET A05=lyra2v2
SET A06=neoscrypt
SET A07=decred
SET A08=blakecoin
SET A09=c11
SET A10=groestl
SET A11=blake2s
REM SET A12=x14
SET A13=x17
SET A14=nist5
SET A15=skein
SET A16=sib
REM SET A17=x11evo
SET A18=lbry
SET A19=timetravel
SET A20=veltor
SET A21=timetravel
SET A22=hmq1725
SET PASS=c=BTC,myr-gr=67,lyra2v2=37,neoscrypt=1.13,blakecoin=4.7,c11=16.4,groestl=32,blake2s=3.73,x17=10.9,nist5=46.3,skein=512.3,sib=11.8,lbry=272,timetravel=26,decred=2.6,veltor=30,bitcore=16,hmq1725=4.58,stats
:start
ECHO Starting NemosMiner-v1.7.2 if this helped you please donate #Nemo....
REM %C% --server %A01%.%POOL% --port 2142 --fee 0 --eexit 2 --user %ADDY% --pass %PASS% %DEV%
REM %B% -r 0 -a %A02% -o stratum+tcp://%A02%.%POOL%:4553 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A03% -o stratum+tcp://%A03%.%POOL%:5433 -u %ADDY% -p %PASS% %DEV%
REM %A% -r 0 -a %A04% -o stratum+tcp://%A04%.%POOL%:3733 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A05% -o stratum+tcp://%A05%.%POOL%:4533 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A06% -o stratum+tcp://%A06%.%POOL%:4233 -u %ADDY% -p %PASS% -i 15 %DEV%
%B% -r 0 -a %A07% -o stratum+tcp://%A07%.%POOL%:5744 -u %ADDY% -p %PASS% %DEV%
%D% -r 0 -a %A08% -o stratum+tcp://%A08%.%POOL%:5743 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A09% -o stratum+tcp://%A09%.%POOL%:3573 -u %ADDY% -p %PASS% %DEV%
%B% -r 0 -a %A10% -o stratum+tcp://%A10%.%POOL%:5333 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A11% -o stratum+tcp://%A11%.%POOL%:5766 -u %ADDY% -p %PASS% %DEV%
REM %A% -r 0 -a %A12% -o stratum+tcp://%A12%.%POOL%:3933 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A13% -o stratum+tcp://%A13%.%POOL%:3737 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A14% -o stratum+tcp://%A14%.%POOL%:3833 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A15% -o stratum+tcp://%A15%.%POOL%:4933 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A16% -o stratum+tcp://%A16%.%POOL%:5033 -u %ADDY% -p %PASS% %DEV%
REM %B% -r 0 -a %A17% -o stratum+tcp://%A17%.%POOL%:3553 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A18% -o stratum+tcp://%A18%.%POOL%:3334 -u %ADDY% -p %PASS% %DEV%
%B% -r 0 -a %A19% -o stratum+tcp://%A19%.%POOL%:3555 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A20% -o stratum+tcp://%A20%.%POOL%:5034 -u %ADDY% -p %PASS% %DEV%
%E% -r 0 -a %A21% -o stratum+tcp://bitcore.%POOL%:3556 -u %ADDY% -p %PASS% %DEV%
%B% -r 0 -a %A22% -o stratum+tcp://%A22%.%POOL%:3747 -u %ADDY% -p %PASS% %DEV%
ECHO Starting NemosMiner-v1.7.2 if this helped you please donate #Nemo....
GOTO start

[flminer]

Great miner! Is there a way to set the number of threads per gpu? Thanks!

edit: nevermind....got it

[minerx117]

Working well, thank you.

I did a small mod to the .bat which lets you choose which GPU devices you want to utilize. Just put "-d 0,1", ect at DEV=

Code:

@echo off
SETLOCAL EnableExtensions
SET ADDY=
SET DEV=-d 1
SET A=ccminerAlexis78.exe
SET B=ccminerTanguy.exe
SET C=zminer.exe
SET D=ccminerAlexis78blakecoin
SET E=ccminerbitcore
SET POOL=mine.zpool.ca
REM SET A01=equihash
REM SET A02=lyra2z
SET A03=myr-gr
REM SET A04=x15
SET A05=lyra2v2
SET A06=neoscrypt
SET A07=decred
SET A08=blakecoin
SET A09=c11
SET A10=groestl
SET A11=blake2s
REM SET A12=x14
SET A13=x17
SET A14=nist5
SET A15=skein
SET A16=sib
REM SET A17=x11evo
SET A18=lbry
SET A19=timetravel
SET A20=veltor
SET A21=timetravel
SET A22=hmq1725
SET PASS=c=BTC,myr-gr=67,lyra2v2=37,neoscrypt=1.13,blakecoin=4.7,c11=16.4,groestl=32,blake2s=3.73,x17=10.9,nist5=46.3,skein=512.3,sib=11.8,lbry=272,timetravel=26,decred=2.6,veltor=30,bitcore=16,hmq1725=4.58,stats
:start
ECHO Starting NemosMiner-v1.7.2 if this helped you please donate #Nemo....
REM %C% --server %A01%.%POOL% --port 2142 --fee 0 --eexit 2 --user %ADDY% --pass %PASS% %DEV%
REM %B% -r 0 -a %A02% -o stratum+tcp://%A02%.%POOL%:4553 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A03% -o stratum+tcp://%A03%.%POOL%:5433 -u %ADDY% -p %PASS% %DEV%
REM %A% -r 0 -a %A04% -o stratum+tcp://%A04%.%POOL%:3733 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A05% -o stratum+tcp://%A05%.%POOL%:4533 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A06% -o stratum+tcp://%A06%.%POOL%:4233 -u %ADDY% -p %PASS% -i 15 %DEV%
%B% -r 0 -a %A07% -o stratum+tcp://%A07%.%POOL%:5744 -u %ADDY% -p %PASS% %DEV%
%D% -r 0 -a %A08% -o stratum+tcp://%A08%.%POOL%:5743 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A09% -o stratum+tcp://%A09%.%POOL%:3573 -u %ADDY% -p %PASS% %DEV%
%B% -r 0 -a %A10% -o stratum+tcp://%A10%.%POOL%:5333 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A11% -o stratum+tcp://%A11%.%POOL%:5766 -u %ADDY% -p %PASS% %DEV%
REM %A% -r 0 -a %A12% -o stratum+tcp://%A12%.%POOL%:3933 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A13% -o stratum+tcp://%A13%.%POOL%:3737 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A14% -o stratum+tcp://%A14%.%POOL%:3833 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A15% -o stratum+tcp://%A15%.%POOL%:4933 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A16% -o stratum+tcp://%A16%.%POOL%:5033 -u %ADDY% -p %PASS% %DEV%
REM %B% -r 0 -a %A17% -o stratum+tcp://%A17%.%POOL%:3553 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A18% -o stratum+tcp://%A18%.%POOL%:3334 -u %ADDY% -p %PASS% %DEV%
%B% -r 0 -a %A19% -o stratum+tcp://%A19%.%POOL%:3555 -u %ADDY% -p %PASS% %DEV%
%A% -r 0 -a %A20% -o stratum+tcp://%A20%.%POOL%:5034 -u %ADDY% -p %PASS% %DEV%
%E% -r 0 -a %A21% -o stratum+tcp://bitcore.%POOL%:3556 -u %ADDY% -p %PASS% %DEV%
%B% -r 0 -a %A22% -o stratum+tcp://%A22%.%POOL%:3747 -u %ADDY% -p %PASS% %DEV%
ECHO Starting NemosMiner-v1.7.2 if this helped you please donate #Nemo....
GOTO start

nice thanks i did have this feature in previous version's but usually i always wanted to run all gpu's any way... so left it out,  i will add it to future builds it does come in handy..

[minerx117]

Great miner! Is there a way to set the number of threads per gpu? Thanks!

edit: nevermind....got it

how did you get on with this? was it worth it did you achieve higher hash rate?

[kopija]

Just started using your baby, works great so far!
Have you given up on Linux version?
I love Nemos miner but I love Linux also, so there exists a problem.

[minerx117]

i'll get on to it asap linux ftw : )

[kopija]

i'll get on to it asap linux ftw : )

You just made my day!
Good luck compiling, you will need it

[JaredKaragen]

Working well, thank you.

I did a small mod to the .bat which lets you choose which GPU devices you want to utilize. Just put "-d 0,1", ect at DEV=

don't forget that intensity works in the same way for rigs with different cards:

I.E.
%A% -r 0 -a -i 12,14 %A16% -o stratum+tcp://%A16%.%POOL%:5033 -u %ADDY% -p %PASS% %DEV%