[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[minerx117]

Working well, thank you.

I did a small mod to the .bat which lets you choose which GPU devices you want to utilize. Just put "-d 0,1", ect at DEV=

don't forget that intensity works in the same way for rigs with different cards:

I.E.
%A% -r 0 -a -i 12,14 %A16% -o stratum+tcp://%A16%.%POOL%:5033 -u %ADDY% -p %PASS% %DEV%

what does puting 2 numbers after -i do? i usually only add a single number eg -i  21 or -i  17  

 for example  -i 12,14 which intensity would it use 12 or 14 ?

Regards Nemo

[JaredKaragen]

Working well, thank you.

I did a small mod to the .bat which lets you choose which GPU devices you want to utilize. Just put "-d 0,1", ect at DEV=

don't forget that intensity works in the same way for rigs with different cards:

I.E.
%A% -r 0 -a -i 12,14 %A16% -o stratum+tcp://%A16%.%POOL%:5033 -u %ADDY% -p %PASS% %DEV%

what does puting 2 numbers after -i do? i usually only add a single number eg -i  21 or -i  17  

 for example  -i 12,14 which intensity would it use 12 or 14 ?

Regards Nemo

That's the intensity selection per-card.

so for a:  -d 0,1,2      (3 video cards)
you can trim intensity per card:  -i 16,26,23 (respectively)

To ID GPU in the system, run nvidiainspector, and it shows gpu number at bottom per gpu.

*edit*

in your case, probably add this up top with the variables:

INT=-i 23,24,25

and add to the string at the end to utilize: ...%A16%.%POOL%:5033 -u %ADDY% -p %PASS% %DEV% %INT%

This is solely for the people with mixed density systems that have an old ass gpu in the mix that won't hash with the high intensity.  Up north I have a few machines with mixed 9 and 6 series.

[minerx117]

thanks JaredKaragen im with you

[phila]

I've had the cmd window go stuck 3 more times like this, nothing after ...terminating workio thread, need to close the cmd window and run NemosMiner again, about every second morning when I wake up it's stuck.  Am I the only one this happens to?  Any way I can circumvent this?

[2017-05-23 04:00:16] bitcore block 4319, diff 561.238
[2017-05-23 04:01:16] GPU #1: Zotac GTX 1060 3GB, 8460.15 kH/s
[2017-05-23 04:01:16] GPU #1: 1609 MHz 136.46 kH/W 62W 58C FAN 64%
[2017-05-23 04:01:40] accepted: 562/570 (diff 0.467), 35.51 MH/s yes!
[2017-05-23 04:02:00] Stratum connection interrupted
[2017-05-23 04:02:01] ...terminating workio thread

[minerx117]

my 1.7.3-zpool test rig is still running fine with out any problems been running for weeks..

h81 pro btc
g1820t 2.4ghz 35watt cpu
2gb ddr3 1333mhz
120gb ssd
1000watt seasonic gold psu
6x gtx 1070 (@120watt each)
win10

problem must be with your pc  

[minerx117]

NemosMiner-v1.7.3 if you have errors coming up=to fix
CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784
CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145


NemosMiner-v1.7.3  (REMEMBER TO INCREASE YOUR VIRTUAL MEMORY/SWAP FILE to 32gb-40gb some algos such as SIB(x11ghost) use it (i run 64000-68000mb) virtual mem on my test rig thats 64-68gb

Regards
#Nemo

p.s if none of that helps you can try installing visual studio: https://www.visualstudio.com/thank-you-downloading-visual-studio/?sku=Community&rel=15

[kopija]

Howdy fellas,
is there any downside for using Cuda 8.0 with Pascal cards and ccminer?
Should I downgrade to 7.5?
Thanks.

[JaredKaragen]

Howdy fellas,
is there any downside for using Cuda 8.0 with Pascal cards and ccminer?
Should I downgrade to 7.5?
Thanks.

I never found issues with 8.0 myself;  just on using it with the older cards.

Pascal cards worked fine so far for me with it.

[enochi]

thanks a lot ,just what I'm looking.
multiPoolMiner seems do the same job,but it is complicated and failed sometimes.yours are simple enough.

[minerx117]

hey.
how --cuda-schedule works? what parameters are here and what the result? in short...

its integers (cuda constants) 0 1 2 ..

are they related to

      0 -  spin 
      1 - yield
      2 - sync  ?

something like that, i dont use it

well. i didn't too but with alexis miner+skein it's an essential.miner didn't start properly all cards time after time when --cuda-schedule 'auto' chooses 'sync'. 'spin' is working fine!yay!=)

i'll do some testing on my test rig with --cuda-schedule spin         see if there is any improvement i did notice with blake2s and skein it does take a little while to get all 6 cards up and running sometimes like 30-60secs  then they finally all decide to start mining..

[cheet]

Hey thank you for this! Is there any miner monitoring software that is compatible with this?

[JaredKaragen]

Hey thank you for this! Is there any miner monitoring software that is compatible with this?

I personally am presently unaware of any monitoring app that has the API support for all the different miner versions used in this package....

That's the thing;  each miner app has its own API format and its rather annoying.

[kopija]

also need to add speed to password 1070=420sols  "equihash=0.42"

Hi minerx,
are you sure its 0.42 that needs to be added for equihash?
And any ideas why Zcash is greyed-out on Zpool?

[minerx117]

also need to add speed to password 1070=420sols  "equihash=0.42"

Hi minerx,
are you sure its 0.42 that needs to be added for equihash?
And any ideas why Zcash is greyed-out on Zpool?

yes im sure.. it disabled because it would take over a week for zpool to find a zcash block..

[crackfoo]

also need to add speed to password 1070=420sols  "equihash=0.42"

Hi minerx,
are you sure its 0.42 that needs to be added for equihash?
And any ideas why Zcash is greyed-out on Zpool?

yes im sure.. it disabled because it would take over a week for zpool to find a zcash block..

yeah, if we can sustain 1M/sol I'll flip it on

[kopija]

also need to add speed to password 1070=420sols  "equihash=0.42"

Hi minerx,
are you sure its 0.42 that needs to be added for equihash?
And any ideas why Zcash is greyed-out on Zpool?

yes im sure.. it disabled because it would take over a week for zpool to find a zcash block..

Thanks, no use then, disabling.

[minerx117]

working on
NemosMiner-v1.7.4-YiiMP (http://yiimp.ccminer.org) & NemosMiner-v1.7.4-hashrefinery (http://pool.hashrefinery.com/site/mining)

[kopija]

working on
NemosMiner-v1.7.4-YiiMP (http://yiimp.ccminer.org) & NemosMiner-v1.7.4-hashrefinery (http://pool.hashrefinery.com/site/mining)

I just installed Windows 10 on my miners.
Because of Nemos I had to say goodbye to Linux.
That automatic drivers update feature is pure horror:)
Hoping you will start working on Linux version soon.

[Akkim]

Sorry for the trouble, I downloaded the files, set up my wallet and started off.
How does payout work? How much can I see the earnings on my account? Is there a way to monitor this?

[kopija]

Sorry for the trouble, I downloaded the files, set up my wallet and started off.
How does payout work? How much can I see the earnings on my account? Is there a way to monitor this?

Put your btc address in here
http://zpool.ca/?address=