sypher9
Newbie
Offline
Activity: 30
Merit: 0
|
|
June 10, 2017, 10:21:21 PM |
|
%B% -r 0 -a %A06% -o stratum+tcp://%A06%.%POOL%:4233 -u %ADDY% -p %PASS% -15 Swtiching to "B" did not work on it's own, but switching to "B" and ALSO removing the -i 15 DID!!! %B% -r 0 -a %A06% -o stratum+tcp://%A06%.%POOL%:4233 -u %ADDY% -p %PASS% Went from ~500 kH/s to 1445 kH/s Starting NemosMiner-v1.7.4 if this helped you please donate #Nemo.... *** ccminer alexis-1.0 for nVidia GPUs from alexis78@github *** *** Built with VC++ 2013 and nVidia CUDA SDK 7.5 (Recommended)
*** Based on tpruvot@github ccminer *** Originally based on Christian Buchner and Christian H. project *** Include some of the work of djm34, sp, tsiv and klausT.
[2017-06-10 18:19:03] Starting on stratum+tcp://myr-gr.mine.zpool.ca:5433 [2017-06-10 18:19:03] NVML GPU monitoring enabled. [2017-06-10 18:19:03] 1 miner thread started, using 'myr-gr' algorithm. [2017-06-10 18:19:03] ...terminating workio thread *** ccminer alexis-1.0 for nVidia GPUs from alexis78@github *** *** Built with VC++ 2013 and nVidia CUDA SDK 7.5 (Recommended)
*** Based on tpruvot@github ccminer *** Originally based on Christian Buchner and Christian H. project *** Include some of the work of djm34, sp, tsiv and klausT.
[2017-06-10 18:19:03] Starting on stratum+tcp://lyra2v2.mine.zpool.ca:4533 [2017-06-10 18:19:03] NVML GPU monitoring enabled. [2017-06-10 18:19:03] 1 miner thread started, using 'lyra2v2' algorithm. [2017-06-10 18:19:04] ...terminating workio thread *** ccminer 2.0 for nVidia GPUs by tpruvot@github *** Built with VC++ 2013 and nVidia CUDA SDK 8.0 64-bits
Originally based on Christian Buchner and Christian H. project Include some algos from alexis78, djm34, sp, tsiv and klausT.
BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)
[2017-06-10 18:19:04] Starting on stratum+tcp://neoscrypt.mine.zpool.ca:4233 [2017-06-10 18:19:04] NVML GPU monitoring enabled. [2017-06-10 18:19:04] NVAPI GPU monitoring enabled. [2017-06-10 18:19:04] 1 miner thread started, using 'neoscrypt' algorithm. [2017-06-10 18:19:04] Stratum difficulty set to 16 (0.00024) [2017-06-10 18:19:04] neoscrypt block 1403251, diff 0.246 [2017-06-10 18:19:05] GPU #0: Intensity set to 16 (+5), 65536 cuda threads [2017-06-10 18:19:06] GPU #0: MSI GTX 1080 Ti, 1467.94 kH/s [2017-06-10 18:19:06] accepted: 1/1 (diff 0.001), 1467.94 kH/s yes! [2017-06-10 18:19:06] neoscrypt block 828155, diff 0.169 [2017-06-10 18:19:08] accepted: 2/2 (diff 0.001), 1471.63 kH/s yes! [2017-06-10 18:19:08] accepted: 3/3 (diff 0.000), 1474.37 kH/s yes! [2017-06-10 18:19:09] accepted: 4/4 (diff 0.001), 1471.73 kH/s yes! [2017-06-10 18:19:09] accepted: 5/5 (diff 0.002), 1469.97 kH/s yes! [2017-06-10 18:19:10] GPU #0: MSI GTX 1080 Ti, 1447.89 kH/s [2017-06-10 18:19:10] accepted: 6/6 (diff 0.001), 1465.55 kH/s yes! [2017-06-10 18:19:11] accepted: 7/7 (diff 0.000), 1466.64 kH/s yes! [2017-06-10 18:19:11] accepted: 8/8 (diff 0.000), 1467.09 kH/s yes! [2017-06-10 18:19:11] accepted: 9/9 (diff 0.002), 1465.27 kH/s yes! [2017-06-10 18:19:12] accepted: 10/10 (diff 0.000), 1462.07 kH/s yes! [2017-06-10 18:19:12] accepted: 11/11 (diff 0.000), 1462.20 kH/s yes! [2017-06-10 18:19:12] accepted: 12/12 (diff 0.000), 1461.54 kH/s yes! [2017-06-10 18:19:13] accepted: 13/13 (diff 0.000), 1459.25 kH/s yes! Much thanks!
|
|
|
|
Walrusbonzo
|
|
June 10, 2017, 11:05:43 PM |
|
%B% -r 0 -a %A06% -o stratum+tcp://%A06%.%POOL%:4233 -u %ADDY% -p %PASS% -15 Swtiching to "B" did not work on it's own, but switching to "B" and ALSO removing the -i 15 DID!!! %B% -r 0 -a %A06% -o stratum+tcp://%A06%.%POOL%:4233 -u %ADDY% -p %PASS% Went from ~500 kH/s to 1445 kH/s Starting NemosMiner-v1.7.4 if this helped you please donate #Nemo.... *** ccminer alexis-1.0 for nVidia GPUs from alexis78@github *** *** Built with VC++ 2013 and nVidia CUDA SDK 7.5 (Recommended)
*** Based on tpruvot@github ccminer *** Originally based on Christian Buchner and Christian H. project *** Include some of the work of djm34, sp, tsiv and klausT.
[2017-06-10 18:19:03] Starting on stratum+tcp://myr-gr.mine.zpool.ca:5433 [2017-06-10 18:19:03] NVML GPU monitoring enabled. [2017-06-10 18:19:03] 1 miner thread started, using 'myr-gr' algorithm. [2017-06-10 18:19:03] ...terminating workio thread *** ccminer alexis-1.0 for nVidia GPUs from alexis78@github *** *** Built with VC++ 2013 and nVidia CUDA SDK 7.5 (Recommended)
*** Based on tpruvot@github ccminer *** Originally based on Christian Buchner and Christian H. project *** Include some of the work of djm34, sp, tsiv and klausT.
[2017-06-10 18:19:03] Starting on stratum+tcp://lyra2v2.mine.zpool.ca:4533 [2017-06-10 18:19:03] NVML GPU monitoring enabled. [2017-06-10 18:19:03] 1 miner thread started, using 'lyra2v2' algorithm. [2017-06-10 18:19:04] ...terminating workio thread *** ccminer 2.0 for nVidia GPUs by tpruvot@github *** Built with VC++ 2013 and nVidia CUDA SDK 8.0 64-bits
Originally based on Christian Buchner and Christian H. project Include some algos from alexis78, djm34, sp, tsiv and klausT.
BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)
[2017-06-10 18:19:04] Starting on stratum+tcp://neoscrypt.mine.zpool.ca:4233 [2017-06-10 18:19:04] NVML GPU monitoring enabled. [2017-06-10 18:19:04] NVAPI GPU monitoring enabled. [2017-06-10 18:19:04] 1 miner thread started, using 'neoscrypt' algorithm. [2017-06-10 18:19:04] Stratum difficulty set to 16 (0.00024) [2017-06-10 18:19:04] neoscrypt block 1403251, diff 0.246 [2017-06-10 18:19:05] GPU #0: Intensity set to 16 (+5), 65536 cuda threads [2017-06-10 18:19:06] GPU #0: MSI GTX 1080 Ti, 1467.94 kH/s [2017-06-10 18:19:06] accepted: 1/1 (diff 0.001), 1467.94 kH/s yes! [2017-06-10 18:19:06] neoscrypt block 828155, diff 0.169 [2017-06-10 18:19:08] accepted: 2/2 (diff 0.001), 1471.63 kH/s yes! [2017-06-10 18:19:08] accepted: 3/3 (diff 0.000), 1474.37 kH/s yes! [2017-06-10 18:19:09] accepted: 4/4 (diff 0.001), 1471.73 kH/s yes! [2017-06-10 18:19:09] accepted: 5/5 (diff 0.002), 1469.97 kH/s yes! [2017-06-10 18:19:10] GPU #0: MSI GTX 1080 Ti, 1447.89 kH/s [2017-06-10 18:19:10] accepted: 6/6 (diff 0.001), 1465.55 kH/s yes! [2017-06-10 18:19:11] accepted: 7/7 (diff 0.000), 1466.64 kH/s yes! [2017-06-10 18:19:11] accepted: 8/8 (diff 0.000), 1467.09 kH/s yes! [2017-06-10 18:19:11] accepted: 9/9 (diff 0.002), 1465.27 kH/s yes! [2017-06-10 18:19:12] accepted: 10/10 (diff 0.000), 1462.07 kH/s yes! [2017-06-10 18:19:12] accepted: 11/11 (diff 0.000), 1462.20 kH/s yes! [2017-06-10 18:19:12] accepted: 12/12 (diff 0.000), 1461.54 kH/s yes! [2017-06-10 18:19:13] accepted: 13/13 (diff 0.000), 1459.25 kH/s yes! Much thanks! Same here. Blakecoin is also faster on 1080ti using tanguy.
|
|
|
|
lankyman
|
|
June 10, 2017, 11:14:41 PM |
|
Any AMD development perhaps? or is the Mars payload mission going to be first?
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
June 10, 2017, 11:20:18 PM |
|
Any AMD development perhaps? or is the Mars payload mission going to be first?
still gota get to the moon before mars... no amd support sorry (its possible but i don't own any amd cards so i could do it but can't test it).....
|
NemosMiner-v3.8.1.3
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
June 11, 2017, 08:10:30 AM |
|
|
NemosMiner-v3.8.1.3
|
|
|
Walrusbonzo
|
|
June 11, 2017, 08:21:26 AM Last edit: June 11, 2017, 10:50:44 AM by Walrusbonzo |
|
Updated my performance table so that Neoscrypt and Blakecoin use the Tanguy binary %B%. Every other algo is default as per Nemominer 1.7.4 | Nemo 1070 - 70% TDP | Walrusbonzo - 1080ti - 80% TDP | Percentage Increase | Power/Card | 125w | 200w | 60% | myr-gr | 67 | 115 | 71.64% | lyra2v2 | 37 | 66 | 78.38% | neoscrypt | 1.13 | 1.35 | 19.46% | decred | 2.6 | 4.3 | 65.38% | blakecoin | 4.7 | 7.2 | 53.19% | c11 | 16.4 | 27.9 | 70.12% | groestl | 32 | 58 | 81.25% | blake2s | 3.73 | 6.6 | 76.94% | x17 | 10.9 | 18.25 | 67.43% | nist5 | 46.3 | 78.2 | 68.90% | skein | 512.3 | 895 | 74.70% | sib | 11.8 | 20.5 | 73.73% | lbry | 272 | 468 | 72.06% | timetravel | 26 | 36 | 38.46% | veltor | 30 | 54.9 | 83.00% | bitcore | 16 | 25.1 | 56.88% | hmq1725 | 4.58 | 7.2 | 57.21% |
SET PASS=c=BTC,myr-gr=115,lyra2v2=66,neoscrypt=1.35,decred=4.3,blakecoin=7.2,c11=27.9,groestl=58,blake2s=6.6,x17=18.2,nist5=78.2,skein=895,sib=20.5,lbry=468,timetravel=36,veltor=55,bitcore=25.1,hmq1725=7.2,stats
|
|
|
|
notsure85
Member
Offline
Activity: 139
Merit: 10
|
|
June 11, 2017, 08:29:26 AM |
|
anyone else got the problem that -eexit 2 is not working on ewbf? Just not quitting after disconnect from mph because of algo switch.
|
|
|
|
boo50
Sr. Member
Offline
Activity: 472
Merit: 250
lux8.net
|
|
June 11, 2017, 09:12:12 AM |
|
I've a problem, which seems to be usual for alexis miner only 3-4 out 6 gpu's start, what solutions?
|
|
|
|
yslyung
Legendary
Offline
Activity: 1500
Merit: 1002
Mine Mine Mine
|
|
June 11, 2017, 10:15:42 AM |
|
new version coming out soon ? i run the multi miner auto switch, 6x1080 ti rig does hang often, no issues on single mining ...
fixed the %B% on neo much better
thx op for helping the community ! high 5 !!!
|
|
|
|
shotgun1969
|
|
June 11, 2017, 11:33:49 PM |
|
new version coming out soon ? i run the multi miner auto switch, 6x1080 ti rig does hang often, no issues on single mining ...
fixed the %B% on neo much better
thx op for helping the community ! high 5 !!!
Update coming will be uploaded later today: NemosMiner-v1.7.5-ZPOOLupdate to EWBF +2%speed (equihash) added separate .bat file for 1050ti,1060,1070,1080ti more accurate speeds.. add sp-mod to the miners so users have the option instead of alexis78.. NemosMiner-v1.7.2-MPHupdate to EWBF +2%speed (equihash) add sp-mod to the miners so users have the option instead of alexis78.. update to ccminercryptonight open to any other improvements let me know before i upload... ohh you are the man cant wait to try it. thankyou
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
June 11, 2017, 11:54:41 PM |
|
I've a problem, which seems to be usual for alexis miner only 3-4 out 6 gpu's start, what solutions?
what solutions? wait... it take 20-60secs to get all gpus hashing wih alexis78 once they all start it doesnt drop them just takes a bit longer to get them all going usually starts 3 gpus then adds the other 3 in after 20-60secs... i will still be using alexis78 over sp-mod but you will have the option if you don't like it....
|
NemosMiner-v3.8.1.3
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
June 11, 2017, 11:57:57 PM |
|
Update coming will be uploaded later today:
NemosMiner-v1.7.5-ZPOOL
update to EWBF +2%speed (equihash) added separate .bat file for 1050ti,1060,1070,1080ti more accurate speeds.. add sp-mod to the miners so users have the option instead of alexis78.. add Device Command to select certain gpus NemosMiner-v1.7.2-MPH
update to EWBF +2%speed (equihash) add sp-mod to the miners so users have the option instead of alexis78.. update to ccminercryptonight add Device Command to select certain gpus
open to any other improvements let me know before i upload...
|
NemosMiner-v3.8.1.3
|
|
|
Storx
|
|
June 12, 2017, 06:06:03 AM |
|
Is there some way to benchmark the algos easier, seen .txt file above that had specific numbers listed as benchmarks for each algo.. how did yall do that? im linking what im talking about [2017-06-08 15:44:54] blakecoin : 8304139.4 kH/s, -10999 MB, 67108864 thr.[0m [2017-06-08 15:44:54] blake : 4767552.0 kH/s, 2 MB, 67108864 thr.[0m [2017-06-08 15:44:54] blake2s : 6717441.6 kH/s, 2 MB, 33554432 thr.[0m [2017-06-08 15:44:54] bmw : 2876996.4 kH/s, 66 MB, 2097152 thr.[0m [2017-06-08 15:44:54] bastion : 19386.4 kH/s, 234 MB, 1048576 thr.[0m [2017-06-08 15:44:54] deep : 66240.6 kH/s, 34 MB, 524288 thr.[0m [2017-06-08 15:44:54] decred : 4961711.2 kH/s, 2 MB, 33554432 thr.[0m [2017-06-08 15:44:54] fresh : 25065.3 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] fugue256 : 723228.2 kH/s, 130 MB, 4194304 thr.[0m [2017-06-08 15:44:54] groestl : 68094.8 kH/s, 2 MB, 524288 thr.[0m [2017-06-08 15:44:54] heavy : 64930.8 kH/s, 166 MB, 524032 thr.[0m [2017-06-08 15:44:54] hmq1725 : 7810.9 kH/s, 644 MB, 524288 thr.[0m [2017-06-08 15:44:54] keccak : 1026037.0 kH/s, 130 MB, 2097152 thr.[0m [2017-06-08 15:44:54] jackpot : 18548.2 kH/s, 108 MB, 1048576 thr.[0m [2017-06-08 15:44:54] jha : 25728.4 kH/s, 134 MB, 1048576 thr.[0m [2017-06-08 15:44:54] lbry : 492183.5 kH/s, 2 MB, 8388608 thr.[0m [2017-06-08 15:44:54] luffa : 549619.1 kH/s, 130 MB, 2097152 thr.[0m [2017-06-08 15:44:54] lyra2 : 5103.1 kH/s, 12 MB, 65536 thr.[0m [2017-06-08 15:44:54] lyra2v2 : 64216.9 kH/s, 1570 MB, 1048576 thr.[0m [2017-06-08 15:44:54] lyra2z : 2651.5 kH/s, 12 MB, 65536 thr.[0m [2017-06-08 15:44:54] myr-gr : 124930.4 kH/s, 66 MB, 1048576 thr.[0m [2017-06-08 15:44:54] neoscrypt : 1475.3 kH/s, 306 MB, 65536 thr.[0m [2017-06-08 15:44:54] nist5 : 83465.4 kH/s, 66 MB, 1048576 thr.[0m [2017-06-08 15:44:54] penta : 26863.5 kH/s, 34 MB, 524288 thr.[0m [2017-06-08 15:44:54] qubit : 32965.1 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] sha256d : 1846864.9 kH/s, 2 MB, 33554432 thr.[0m [2017-06-08 15:44:54] sha256t : 1066858.2 kH/s, 2 MB, 8388608 thr.[0m [2017-06-08 15:44:54] sia : 3129930.5 kH/s, 2 MB, 67108864 thr.[0m [2017-06-08 15:44:54] sib : 15462.1 kH/s, 1218 MB, 1048576 thr.[0m [2017-06-08 15:44:54] skein : 706579.5 kH/s, 2 MB, 1048576 thr.[0m [2017-06-08 15:44:54] skein2 : 640114.9 kH/s, 34 MB, 524288 thr.[0m [2017-06-08 15:44:54] s3 : 66537.9 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] timetravel : 21979.2 kH/s, 34 MB, 524288 thr.[0m [2017-06-08 15:44:54] bitcore : 27810.0 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] x11evo : 12635.2 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] x11 : 16460.0 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] x13 : 17518.1 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] x14 : 17889.2 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] x15 : 17076.3 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] x17 : 16736.9 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] vanilla : 6290462.1 kH/s, 2 MB, 16777216 thr.[0m [2017-06-08 15:44:54] veltor : 39056.8 kH/s, 130 MB, 2097152 thr.[0m [2017-06-08 15:44:54] whirlpool : 78090.1 kH/s, 2 MB, 524288 thr.[0m [2017-06-08 15:44:54] zr5 : 6622.8 kH/s, 88 MB, 262144 thr.[0m [2017-06-08 15:44:54] GPU #1: Intensity set to 18, 262144 cuda threads[0m
|
- GPUs Mining : 128 (Updated 3/7/18) // CPUs Mining : 19 (Updated 2/23/18)
|
|
|
newmz
Sr. Member
Offline
Activity: 372
Merit: 250
The road of excess leads to the palace of wisdom
|
|
June 12, 2017, 06:16:28 AM |
|
Update coming will be uploaded later today:
NemosMiner-v1.7.5-ZPOOL
update to EWBF +2%speed (equihash) added separate .bat file for 1050ti,1060,1070,1080ti more accurate speeds.. add sp-mod to the miners so users have the option instead of alexis78.. add Device Command to select certain gpus NemosMiner-v1.7.2-MPH
update to EWBF +2%speed (equihash) add sp-mod to the miners so users have the option instead of alexis78.. update to ccminercryptonight add Device Command to select certain gpus
open to any other improvements let me know before i upload...
Looking forward to trying the new version, but I have a question: it sounds like you will have specific .bat files for different GPUs or something right? What is the best strategy for someone like me who has a mixed rig, i.e. I have 2 x 1070s & 2 x 1060 6GB? ....and is it ready yet?
|
Crypto currency enthusiast and miner since 2015. Mined approx 200 ETH during 2016 and 2017 and sold it at approximately $US40 each. Then I watched it reach $1000+ each. If anyone bothers to read this stuff pay attention to this: HODL HODL HODL HODL HODL HODL
I started mining with 1 AMD 7950 and 1 R9-280X. Then I gradually built my AMD operation into 12 R9-290s. Awesome ETH hash but ridiculous power consumption and heat. Over the last year I defected to the Nvidia team. I now use GTX 1070s. They were expensive to buy (probably a bargain now) but awesome hash rate vs. power consumption. blah blah blah blah
|
|
|
chrysophylax
Legendary
Offline
Activity: 2898
Merit: 1091
--- ChainWorks Industries ---
|
|
June 12, 2017, 06:17:37 AM |
|
I've a problem, which seems to be usual for alexis miner only 3-4 out 6 gpu's start, what solutions?
what solutions? wait... it take 20-60secs to get all gpus hashing wih alexis78 once they all start it doesnt drop them just takes a bit longer to get them all going usually starts 3 gpus then adds the other 3 in after 20-60secs... i will still be using alexis78 over sp-mod but you will have the option if you don't like it.... this is due to the default intensity settings ... and the way it handles it - on the ccminer-alexis78 fork ... #crysx
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
June 12, 2017, 06:32:29 AM |
|
Update coming will be uploaded later today:
NemosMiner-v1.7.5-ZPOOL
update to EWBF +2%speed (equihash) added separate .bat file for 1050ti,1060,1070,1080ti more accurate speeds.. add sp-mod to the miners so users have the option instead of alexis78.. add Device Command to select certain gpus NemosMiner-v1.7.2-MPH
update to EWBF +2%speed (equihash) add sp-mod to the miners so users have the option instead of alexis78.. update to ccminercryptonight add Device Command to select certain gpus
open to any other improvements let me know before i upload...
Looking forward to trying the new version, but I have a question: it sounds like you will have specific .bat files for different GPUs or something right? What is the best strategy for someone like me who has a mixed rig, i.e. I have 2 x 1070s & 2 x 1060 6GB? ....and is it ready yet? buy more cards and build 2 separate rigs.. : ) not yet testing it now on my testrig.. still finishing 1050ti and 1060 benchmarks.. 20 algos (equihash,neoscrypt,blake2s,blakecoin,lyra2z,hmq1725,decred,x17,sib,c11,lyra2v2,bitcore,veltor,groestl,x11evo,myr-gr,nist5,lbry,timetravel,skein)
|
NemosMiner-v3.8.1.3
|
|
|
sreg0r
Newbie
Offline
Activity: 34
Merit: 0
|
|
June 12, 2017, 07:07:48 AM |
|
Is there some way to benchmark the algos easier, seen .txt file above that had specific numbers listed as benchmarks for each algo.. how did yall do that? im linking what im talking about [2017-06-08 15:44:54] blakecoin : 8304139.4 kH/s, -10999 MB, 67108864 thr.[0m [2017-06-08 15:44:54] blake : 4767552.0 kH/s, 2 MB, 67108864 thr.[0m [2017-06-08 15:44:54] blake2s : 6717441.6 kH/s, 2 MB, 33554432 thr.[0m [2017-06-08 15:44:54] bmw : 2876996.4 kH/s, 66 MB, 2097152 thr.[0m [2017-06-08 15:44:54] bastion : 19386.4 kH/s, 234 MB, 1048576 thr.[0m [2017-06-08 15:44:54] deep : 66240.6 kH/s, 34 MB, 524288 thr.[0m [2017-06-08 15:44:54] decred : 4961711.2 kH/s, 2 MB, 33554432 thr.[0m [2017-06-08 15:44:54] fresh : 25065.3 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] fugue256 : 723228.2 kH/s, 130 MB, 4194304 thr.[0m [2017-06-08 15:44:54] groestl : 68094.8 kH/s, 2 MB, 524288 thr.[0m [2017-06-08 15:44:54] heavy : 64930.8 kH/s, 166 MB, 524032 thr.[0m [2017-06-08 15:44:54] hmq1725 : 7810.9 kH/s, 644 MB, 524288 thr.[0m [2017-06-08 15:44:54] keccak : 1026037.0 kH/s, 130 MB, 2097152 thr.[0m [2017-06-08 15:44:54] jackpot : 18548.2 kH/s, 108 MB, 1048576 thr.[0m [2017-06-08 15:44:54] jha : 25728.4 kH/s, 134 MB, 1048576 thr.[0m [2017-06-08 15:44:54] lbry : 492183.5 kH/s, 2 MB, 8388608 thr.[0m [2017-06-08 15:44:54] luffa : 549619.1 kH/s, 130 MB, 2097152 thr.[0m [2017-06-08 15:44:54] lyra2 : 5103.1 kH/s, 12 MB, 65536 thr.[0m [2017-06-08 15:44:54] lyra2v2 : 64216.9 kH/s, 1570 MB, 1048576 thr.[0m [2017-06-08 15:44:54] lyra2z : 2651.5 kH/s, 12 MB, 65536 thr.[0m [2017-06-08 15:44:54] myr-gr : 124930.4 kH/s, 66 MB, 1048576 thr.[0m [2017-06-08 15:44:54] neoscrypt : 1475.3 kH/s, 306 MB, 65536 thr.[0m [2017-06-08 15:44:54] nist5 : 83465.4 kH/s, 66 MB, 1048576 thr.[0m [2017-06-08 15:44:54] penta : 26863.5 kH/s, 34 MB, 524288 thr.[0m [2017-06-08 15:44:54] qubit : 32965.1 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] sha256d : 1846864.9 kH/s, 2 MB, 33554432 thr.[0m [2017-06-08 15:44:54] sha256t : 1066858.2 kH/s, 2 MB, 8388608 thr.[0m [2017-06-08 15:44:54] sia : 3129930.5 kH/s, 2 MB, 67108864 thr.[0m [2017-06-08 15:44:54] sib : 15462.1 kH/s, 1218 MB, 1048576 thr.[0m [2017-06-08 15:44:54] skein : 706579.5 kH/s, 2 MB, 1048576 thr.[0m [2017-06-08 15:44:54] skein2 : 640114.9 kH/s, 34 MB, 524288 thr.[0m [2017-06-08 15:44:54] s3 : 66537.9 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] timetravel : 21979.2 kH/s, 34 MB, 524288 thr.[0m [2017-06-08 15:44:54] bitcore : 27810.0 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] x11evo : 12635.2 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] x11 : 16460.0 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] x13 : 17518.1 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] x14 : 17889.2 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] x15 : 17076.3 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] x17 : 16736.9 kH/s, 610 MB, 524288 thr.[0m [2017-06-08 15:44:54] vanilla : 6290462.1 kH/s, 2 MB, 16777216 thr.[0m [2017-06-08 15:44:54] veltor : 39056.8 kH/s, 130 MB, 2097152 thr.[0m [2017-06-08 15:44:54] whirlpool : 78090.1 kH/s, 2 MB, 524288 thr.[0m [2017-06-08 15:44:54] zr5 : 6622.8 kH/s, 88 MB, 262144 thr.[0m [2017-06-08 15:44:54] GPU #1: Intensity set to 18, 262144 cuda threads[0m
I don't know about all versions, but the tpruvot fork you can run with `--benchmark`
|
|
|
|
newmz
Sr. Member
Offline
Activity: 372
Merit: 250
The road of excess leads to the palace of wisdom
|
|
June 12, 2017, 07:22:33 AM |
|
Update coming will be uploaded later today:
NemosMiner-v1.7.5-ZPOOL
update to EWBF +2%speed (equihash) added separate .bat file for 1050ti,1060,1070,1080ti more accurate speeds.. add sp-mod to the miners so users have the option instead of alexis78.. add Device Command to select certain gpus NemosMiner-v1.7.2-MPH
update to EWBF +2%speed (equihash) add sp-mod to the miners so users have the option instead of alexis78.. update to ccminercryptonight add Device Command to select certain gpus
open to any other improvements let me know before i upload...
Looking forward to trying the new version, but I have a question: it sounds like you will have specific .bat files for different GPUs or something right? What is the best strategy for someone like me who has a mixed rig, i.e. I have 2 x 1070s & 2 x 1060 6GB? ....and is it ready yet? buy more cards and build 2 separate rigs.. : ) yeah I know right? I actually have 6 power hungry AMD 290s which I really should sell to fund some new 1060s or 1070s, but some of them are too modified (watercooling, non factory fans, etc) to sell. I have an MSI 290x Lightning which I should sell because it paid for itself long ago and it's a great gaming card - but for mining it's just a power hog.
|
Crypto currency enthusiast and miner since 2015. Mined approx 200 ETH during 2016 and 2017 and sold it at approximately $US40 each. Then I watched it reach $1000+ each. If anyone bothers to read this stuff pay attention to this: HODL HODL HODL HODL HODL HODL
I started mining with 1 AMD 7950 and 1 R9-280X. Then I gradually built my AMD operation into 12 R9-290s. Awesome ETH hash but ridiculous power consumption and heat. Over the last year I defected to the Nvidia team. I now use GTX 1070s. They were expensive to buy (probably a bargain now) but awesome hash rate vs. power consumption. blah blah blah blah
|
|
|
newmz
Sr. Member
Offline
Activity: 372
Merit: 250
The road of excess leads to the palace of wisdom
|
|
June 12, 2017, 01:13:19 PM |
|
So is it ready yet?
|
Crypto currency enthusiast and miner since 2015. Mined approx 200 ETH during 2016 and 2017 and sold it at approximately $US40 each. Then I watched it reach $1000+ each. If anyone bothers to read this stuff pay attention to this: HODL HODL HODL HODL HODL HODL
I started mining with 1 AMD 7950 and 1 R9-280X. Then I gradually built my AMD operation into 12 R9-290s. Awesome ETH hash but ridiculous power consumption and heat. Over the last year I defected to the Nvidia team. I now use GTX 1070s. They were expensive to buy (probably a bargain now) but awesome hash rate vs. power consumption. blah blah blah blah
|
|
|
DaniRC
Newbie
Offline
Activity: 17
Merit: 0
|
|
June 12, 2017, 01:15:15 PM |
|
I'm newbie, What miner do you recomend for 1080 ti?
|
|
|
|
|