[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[richdmz]

I haven't seen a new version released for a while, should we just be downloading the master from github as I see changed have been made.

Thanks!

[Nickie001]

Used to mine Litecoin on ASIC. Frankly, the yield per day did not exceed 12 $, and taking into account the cost of electricity -  8 $, not thick!
Now I'm thinking about the mastenodes, i've been watching the news about them for a while now. I'm trying to choose from three: GoByte, Zest and LUX.

Still, I'm looking towards the first coin - it's too tempting to hear the latest news about the decline in the cost of the transaction and the increase in profits for the owners of masternodes, which is not the case with other coins - they promise 70% of the award against 30% to the miners. It sounds attractive, and GoByte is not just another scam project - they've already collected the funds and the product is working. Guys, I need you help! Which coin would you prefer from these three and why?

[oddity2505]

minerx117
I see in the master branch commits that you listed Delos miner as the fastest for several algorithms. I have tried it for on phi algo for half a day myself - in the terminal window it reports almost 15% higher hashrate than enemy 1.11 or sp-mod, however on the pool side I have never seen any proofs of improvements. In fact the hashrate actually dropped compared to those two miners. The average stabilized around 11-12 Mhs per 1060 3GB pl80 (whereas the miner reported 14Mhs per card). Moreover, it mines on dev pool every 30 minutes, and the first dev mining period starts only a couple minutes after you start the miner. So if you use current profit zergpool/blazepool etc. that stays on phi for just several minutes, half of that time you would be mining on Delos miner's dev.

[LDPinch]

Is there any way to manually choose what algos to be mined from each pool?
I tried to tweek some files inside the config folder but even though I deleted some algos from the list under the pool's name, it kept loading those algos when I start Nemos.

Maybe it's taking the list in a dynamic way when it connects to each pool. Does anyone in which file is this coded? I could try manually change the code in order to read the pool-algos file.

same here, modifying PoolsAlgos.json does nothing.

[Etherion]

There hase been 555 commits sins the Apr 13 release.

Should one wait for the release or can one clone the master?

Same question as

I haven't seen a new version released for a while, should we just be downloading the master from github as I see changed have been made.

Thanks!

[Etherion]

"Nist5, and skein algo estimates are changed to mBTC/GH/day instead of mBTC/MH/day. Update miner software accordingly or use API/status parameter to reflect on multiplier" Zergpool

how to update?

[minerx117]

Making some tests in last 3 days:
blazepool is better than ahashpool
nicehash is better than blazepool ...
Maybe its up to per day stats because I use 1 rig mining for 24h.

zergpool is better than nicehash ...

[minerx117]

I have to add that the GPU monitor stops running after several hours, it just closes without apparent reason.

This happens to me too. I tried to make the .bat restart itself if the monitor closes with Windows Task Scheduler, but I can't seem to make it work properly.

i don't use the Monitor its not needed as long as you rig is stable....

@ no spam pls

Best Regards
Nemo

[minerx117]

"Nist5, and skein algo estimates are changed to mBTC/GH/day instead of mBTC/MH/day. Update miner software accordingly or use API/status parameter to reflect on multiplier" Zergpool

how to update?

Already done ...

Latest Source Code: https://github.com/nemosminer/NemosMiner/archive/master.zip

Best Regards
Nemo

[minerx117]

There hase been 555 commits sins the Apr 13 release.

Should one wait for the release or can one clone the master?

Same question as

I haven't seen a new version released for a while, should we just be downloading the master from github as I see changed have been made.

Thanks!

I'd recommend Using the Latest Source Code.. there has been alot of miner and algo changes since last Release..

Updated 19/06/18  : https://github.com/nemosminer/NemosMiner/archive/master.zip  

Best Regards
Nemo

[minerx117]

Any chance that you'll add support for these?
- ETHlargement tool --> supposed to boost ETH mining
- DelosMiner --> performs very good on Phi, Skunk, and some more

i use ETHlargement tool on my 1080ti rigs i just have it start on startup along with nemosminer..

you can do this yourself i don't need to add ETHlargement tool to Nemosminer..

DelosMiner is already added and fully tested "OptionalMiners"

Best Regards
Nemo

[minerx117]

ccminerx16r-x16s

Shame those just cause errors and reboots on 6*1080ti rigs
something about memory, before ccminer throws a wobbly, and if not manually terminated will crash sys

Tried latest, and then master, same issue.

Works fine when those are deleted from the list.

i have a few 6x1080ti rigs ccminerx16r and ccminerx16s run great... problem is at your end
(cuda 9.2 maybe requires Geforce driver 397.44 or newer..) its in the ReadMe

[minerx117]

minerx117
I see in the master branch commits that you listed Delos miner as the fastest for several algorithms. I have tried it for on phi algo for half a day myself - in the terminal window it reports almost 15% higher hashrate than enemy 1.11 or sp-mod, however on the pool side I have never seen any proofs of improvements. In fact the hashrate actually dropped compared to those two miners. The average stabilized around 11-12 Mhs per 1060 3GB pl80 (whereas the miner reported 14Mhs per card). Moreover, it mines on dev pool every 30 minutes, and the first dev mining period starts only a couple minutes after you start the miner. So if you use current profit zergpool/blazepool etc. that stays on phi for just several minutes, half of that time you would be mining on Delos miner's dev.

i recommend to Not use DelosMiner... i persoanlly do not use it thats why its in "OptionalMiners"

its up to you if you want to add it to "Miners"

By default DelosMiner is Disabled in NemosMiner

Best Regards
Nemo

[muilfa]

I'd recommend Using the Latest Source Code.. there has been alot of miner and algo changes since last Release..

Updated 19/06/18  : https://github.com/nemosminer/NemosMiner/archive/master.zip  

Best Regards
Nemo


I write No mining running,if you run a benchmark

[minerx117]

@muilfa

close and re run..

 Run NemosMiner-v3.1.bat
  1. Config tab
  2. Set your Wallet address and Username
  3. Select your pool/s and load default Algos button. (Remove any algos you do not want to mine)
  4. "Save Config"
  5. Close
  Run NemosMiner-v3.1.bat
  6."Start"
 
  note: 2. you only need to change Username if you are using Miningpoolhub

[skablast]

Nemo, is Nplus also based on Nemosminer ?

the latest one doesn't work: I selected Ahashpool and Zergpool.


ALL THE ALGO in the Benchmark are from Ahashpool , noone from zergpool.


The latest version doesn' divide by 1000 the info coming from Zergpool, it divide  by 1000. 000 ALL the algos

[muilfa]

@muilfa

close and re run..

 Run NemosMiner-v3.1.bat
  1. Config tab
  2. Set your Wallet address and Username
  3. Select your pool/s and load default Algos button. (Remove any algos you do not want to mine)
  4. "Save Config"
  5. Close
  Run NemosMiner-v3.1.bat
  6."Start"
  
  note: 2. you only need to change Username if you are using Miningpoolhub





I do the same, on previous versions it works

[k2laci]

I have 6x1070 rig.

This Benchmark (Bminer - Equihash - Miningpoolhub) not real !!!

https://ibb.co/jrUu0J

Miner               Algorithm           Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
-----               ---------           ----- -------- ------- ------- ---------- ----
Bminer              Equihash      268,77 KH/s   96,720 0,09672 642,241  359,85756 miningpoolhub-Zcash
ccminerKlausT       NeoScrypt       6,81 MH/s    1,232 0,00123   8,181    0,18102 zergpoolplus-39
EthashClaymore      Ethash        181,39 MH/s    1,140 0,00114   7,568    0,00628 miningpoolhub-Ethereum
ccminerx16r         X16R           66,14 MH/s    1,081 0,00108   7,176    0,01634 zergpoolplus-3
ccminerAlexis78     X17            66,96 MH/s    1,009 0,00101   6,703    0,01508 zergpoolplus-3

[MrPlus]

Nemo, is Nplus also based on Nemosminer ?

the latest one doesn't work: I selected Ahashpool and Zergpool.


ALL THE ALGO in the Benchmark are from Ahashpool , noone from zergpool.


The latest version doesn' divide by 1000 the info coming from Zergpool, it divide  by 1000. 000 ALL the algos

NPlusMiner And NemosMiner share the same code.

There was an issue in 2.2.1 for zergpool and zergpool24hr which has been corrected.
Please re-download the release.

[minerx117]

GTX 1180 - Release Date, Specs & Price

https://www.youtube.com/watch?v=UBbyACygmAs

start saving... 5 weeks to go...