frodocooper
|
|
February 17, 2018, 05:10:30 AM |
|
Perhaps there is a misunderstanding here. I did not release "Litecoin and Bitcoin Cash P2pool forks". I only released one fork...
Understood. My bad on that part, then. Frodocooper, everyone in this thread except you agrees that splitting this into two separate threads -- one for Bitcoin, and one for everything else -- is unnecessary and would make it harder to participate in the p2pool community...
Nevertheless, this thread, and everyone in this thread, exists on a privately owned and operated forum with its own set of rules. This thread, and everyone in this thread, is therefore subject to those rules, of which it is my job to enforce. This is the core of the issue. Bitcoin's market dominance used to be 95% or more. At that time, it might have made sense to segregate off non-Bitcoin discussions into their own sideshows. Now, Bitcoin's market dominance is only 35%, and so the distinction between Bitcoin and non-Bitcoin has become less important. Nowadays, Bitcoin is just one of many cryptocurrencies. As such, it no longer makes sense to give Bitcoin privileged status.
Splitting the discussion into Bitcoin and non-Bitcoin does not make sense. Moving the discussion entirely into the Altcoin forum doesn't make sense either, as Bitcoin is still the largest p2pool community.
This forum's structure was designed around a hierarchy that no longer exists. This forum topic should perhaps be in a forum titled "Cryptocurrency Mining" to encompass both Bitcoin and Altcoin. Unless you're planning on creating that forum, I suggest you just leave things as they are, since it seems to be working as it is.
Point taken. Nevertheless, it is not within my power nor authority to decide whether this forum should be named the Bitcoin Forum or the Cryptocurrency Forum, or whether the forum as a whole should encompass all coins under one umbrella. That's theymos' role. My job is merely to enforce the rules as they are. If you would like to have these rules changed to acknowledge and accommodate your requests, then I suggest you contact theymos about it. If you'd also like to discuss this further in public, then feel free to post about it on the Meta board. This discussion is already off-topic in this thread as it is. Therefore, until theymos says otherwise, my stance remains: all further altcoin-related discussions in this thread will be deleted without notice. Also, all further discussion regarding this should be taken to the Meta board.
|
|
|
|
nreal
Full Member
Offline
Activity: 932
Merit: 100
arcs-chain.com
|
|
February 17, 2018, 06:00:18 AM |
|
So how do you start a node in that forked jtoomin network? -w 9334 or what? Where is readme or something? It is very bad to split small p2pool in two small networks - ill hope it doesent go any smaller from this :O I think that share diff should be increased 10x at least.
|
|
|
|
jtoomim
|
|
February 17, 2018, 07:19:00 AM Last edit: February 17, 2018, 01:58:05 PM by jtoomim |
|
Installation instructions for p2pool (both jtoomimnet and mainnet) can be found in the second post of this thread: https://forum.bitcoin.com/pools/p2pool-decentralized-dos-resistant-trustless-censorship-resistant-pool-t69932.htmlI recommend that all subsequent discussion of p2pool be done in that thread, as it seems that the majority of p2pool-related discussion is now being considered off-topic in this thread. That forum's software is better, too. And, unlike bitcointalk, it's not blocked by the Great Firewall of China.
|
Hosting bitcoin miners for $65 to $80/kW/month on clean, cheap hydro power. http://Toom.im
|
|
|
nreal
Full Member
Offline
Activity: 932
Merit: 100
arcs-chain.com
|
|
February 17, 2018, 08:33:27 AM |
|
Thank You
|
|
|
|
crypto_curious
|
|
March 17, 2018, 11:35:35 AM Last edit: March 17, 2018, 11:47:36 AM by crypto_curious |
|
2) I connected to someone's node (because I do not know how to create one) that has an average ping time of 75 ms, is this good?
75 ms is fine. The network latency to the node is a lot less important than the CPU speed of the node. A node with a slow CPU might take 3000 ms to hand out new work to your workers, whereas a node with a fast CPU might only take 500 ms. Whether you're adding 1 ms or 200 ms of network latency to that is nearly (but not quite) irrelevant. looking at the nodes' scanner page, is there anything can tell us about CPU speed of a node? I think you mean hashrate, and yes this is JT's currently: Local rate: 58.1TH/s (2.1% DOA) Expected time to share: 2.1 minutes http://ml.toom.im:9332/static/Hi guys, I have few questions:) 1. Where I can find information, when blocks have been found by jtomim fork? Historical data and current data from last few months? I am considering to mine on p2pool. 2. Is anyone still mining on forrestv branch? EDIT: I've just read about jtomim plans to merge both branches. When is that going to happen? 3. Is jtomim fork supporting BECH32 addresses, native segwit? Can I mine there with bc1 Bitcoin address?
|
|
|
|
Bitcoinpoolextremadura
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 23, 2018, 07:26:20 PM |
|
Hello, In the last few days, has the hash power of 2PH been reduced to less than 1PH, who knows why more than 50% of the miners have left? Thanks.
|
|
|
|
bimmylee
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 24, 2018, 04:22:42 PM Last edit: March 27, 2018, 03:13:05 AM by frodocooper |
|
First I am sorry if this was asked but I thought we get a payout when a block has been found. There has been two blocks found by p2pool this week, screenshot is from BlockTrail https://image.ibb.co/f8wjLS/Blocktrail.jpgI have been mining with the pool for times the blocks were found with expected payouts https://image.ibb.co/bMwqun/Pool.jpgI still haven't received any payout. Do I have to wait 3 days for the payout? Any info will be greatly appreciated. Moderator's note: This post was edited by frodocooper to remove inline image tags.
|
|
|
|
sawa
Legendary
Offline
Activity: 1308
Merit: 1011
|
|
March 24, 2018, 11:36:45 PM Last edit: March 27, 2018, 03:14:27 AM by frodocooper |
|
...
The last blocks were found in the network jtoomimnet Here is the scanner of the nodes of this network: http://p2pool.top/scanner/btc-j/ Moderator's note: This post was edited by frodocooper to trim the quote from bimmylee.
|
|
|
|
moharni
Newbie
Offline
Activity: 35
Merit: 0
|
|
March 25, 2018, 01:22:59 PM Last edit: March 27, 2018, 03:15:24 AM by frodocooper |
|
So is jtoomimnet's network separate from the old network? Also, is there a website for jtoomimnet's network in which we can monitor activities and connect to nodes? I know only this website: p2pool.org Moderator's note: This post was edited by frodocooper to remove a nested quote.
|
|
|
|
bimmylee
Newbie
Offline
Activity: 2
Merit: 0
|
|
March 27, 2018, 04:12:52 AM |
|
So if I switch to jtoomimnet's node I lose all the work I put into the p2pool.org node?
|
|
|
|
crypto_curious
|
|
March 27, 2018, 05:17:21 PM |
|
Yes. You start from zero again.
|
|
|
|
moharni
Newbie
Offline
Activity: 35
Merit: 0
|
|
March 27, 2018, 10:38:34 PM |
|
Yes. You start from zero again.
Currently, I am not running a local node. Do you know how to connect to a public node of jtoomimnet's network? Like in the old P2pool nerwork, there is this website http://p2pool.org/stats/node_scanner.php
|
|
|
|
tubexc
|
|
March 28, 2018, 10:10:19 AM |
|
|
|
|
|
moharni
Newbie
Offline
Activity: 35
Merit: 0
|
|
March 28, 2018, 03:15:34 PM |
|
Thank you, this is what I was looking for
|
|
|
|
Rabinovitch
Legendary
Offline
Activity: 2030
Merit: 1076
A humble Siberian miner
|
|
April 07, 2018, 08:00:36 AM |
|
Is there any news about the current attack to Jtoomim's p2pool network?
|
|
|
|
jtoomim
|
|
April 07, 2018, 09:12:32 AM |
|
Is there any news about the current attack to Jtoomim's p2pool network?
The majority of p2pool discussion is no longer performed in this thread. It has moved to forum.bitcoin.com, since bitcointalk's moderators wanted only BTC-related discussion in this thread, and most of p2pool's users wanted to be able to discuss everything p2pool related in the same thread instead of having one thread for BTC and a different thread for everyone else. Information on the current *bug* on the jtoomimnet BTC p2pool can be found in the following thread, along with most other p2pool discussion: https://forum.bitcoin.com/pools/p2pool-decentralized-dos-resistant-trustless-censorship-resistant-pool-t69932-120.htmlI currently believe that this is a compound bug in both bmminer 2.0 and p2pool. Older S9s (bmminer 1.0) seem to be working fine, and newer S9s are also working fine on different pools, but new S9s don't work on BTC p2pool right now as long as the BTC p2pool is the primary pool, in which case bmminer crashes on startup.
|
Hosting bitcoin miners for $65 to $80/kW/month on clean, cheap hydro power. http://Toom.im
|
|
|
smewnoi
Newbie
Offline
Activity: 11
Merit: 0
|
|
May 24, 2018, 06:45:55 AM Last edit: May 24, 2018, 09:28:05 AM by smewnoi |
|
On may 5, 2018, p2pool-vip was launched with port: 19343 p2pool with port 9334 as well as 9332 continue to work
At the moment: Actual hashrate: 29.29 PH/s Global: 39.48 PH/s Found 3 Block: 11, 17, 22 on may. We got rid of the problem of disconnecting devices from Bitman and other manufacturers ! Lists of nodes that support this pool: http://p2pool.top/scanner/btc-vip/http://www.p2pool.site/btcv.htmlTo connect, you can write to telegram: https://t.me/p2pool any of the admins above will tell you in what direction to move. System for admission: prior to confirmation of the hashrate. We are against: 1. Rent2. PalheiroFor 1 or 2 point in ban. If you are a single manner and you do not have the required 500TH +, just on the channel in telegram: https://t.me/p2pool you can find someone to combine your hashrate and come to us on the remote. We are all waiting !!! Block: 2018-05-11 18:44:14 https://bitinfocharts.com/bitcoin/block/522202/00000000000000000002726e0d79a257667d1794a064001659db77a1a2415e002018-05-17 14:24:43 https://bitinfocharts.com/bitcoin/block/523089/0000000000000000002be8b6954f6930c1d9d1d1e436cdb7db5f1e613c7463772018-05-22 18:45:22 https://bitinfocharts.com/bitcoin/block/523859/0000000000000000003f0560cee18301fec384fb8b0ab0516dbd44c707833bf0VIP p2pool was created after many devices have problems with the inability to process work with a large number of workers in coinbase. The goal is to gather in a single holder of large capacity. This will minimize on a merged pool, the number of worker using p2pool software, to minimize losses through most nearest server to the capacity of miners and of course to combine large power. This was done by adding verification of the workers to their BTC address.
|
|
|
|
ramsis
Newbie
Offline
Activity: 5
Merit: 0
|
|
May 24, 2018, 07:04:55 AM Last edit: May 24, 2018, 07:16:51 AM by ramsis |
|
All my miners Antminer S9 /Ebit 9+/ Bitfury miner - are working perfectly! The port 19343 is constantly monitored by the number of connected miners.
|
|
|
|
scopus
Newbie
Offline
Activity: 15
Merit: 0
|
|
May 24, 2018, 07:22:03 AM |
|
Seven days of work without a break.
|
|
|
|
smewnoi
Newbie
Offline
Activity: 11
Merit: 0
|
|
May 24, 2018, 07:30:37 AM |
|
Seven days of work without a break.
http://p2pool.ru/img/3213.jpgWell, not 7 days, and on may 5th the start was
|
|
|
|
|