[1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool

[nreal]

So how do you start a node in that forked jtoomin network? -w 9334 or what? Where is readme or something? It is very bad to split small p2pool in two small networks - ill hope it doesent go any smaller from this :O I think that share diff should be increased 10x at least.

[jtoomim]

Installation instructions for p2pool (both jtoomimnet and mainnet) can be found in the second post of this thread:

https://forum.bitcoin.com/pools/p2pool-decentralized-dos-resistant-trustless-censorship-resistant-pool-t69932.html

I recommend that all subsequent discussion of p2pool be done in that thread, as it seems that the majority of p2pool-related discussion is now being considered off-topic in this thread. That forum's software is better, too. And, unlike bitcointalk, it's not blocked by the Great Firewall of China.

[nreal]

Installation instructions for p2pool (both jtoomimnet and mainnet) can be found in the second post of this thread:

https://forum.bitcoin.com/pools/p2pool-decentralized-dos-resistant-trustless-censorship-resistant-pool-t69932.html

I recommend that all subsequent discussion of p2pool be done in that thread, as it seems that the majority of p2pool-related discussion is now being considered off-topic in this thread. That forum's software is better, too.

Thank You

[crypto_curious]

2) I connected to someone's node (because I do not know how to create one) that has an average ping time of 75 ms, is this good?

75 ms is fine. The network latency to the node is a lot less important than the CPU speed of the node. A node with a slow CPU might take 3000 ms to hand out new work to your workers, whereas a node with a fast CPU might only take 500 ms. Whether you're adding 1 ms or 200 ms of network latency to that is nearly (but not quite) irrelevant.

looking at the nodes' scanner page, is there anything can tell us about CPU speed of a node?

I think you mean hashrate, and yes this is JT's currently:
Local rate: 58.1TH/s (2.1% DOA) Expected time to share: 2.1 minutes
http://ml.toom.im:9332/static/

Hi guys, I have few questions:)

1. Where I can find information, when blocks have been found by jtomim fork? Historical data and current data from last few months? I am considering to mine on p2pool.
2. Is anyone still mining on forrestv branch? EDIT: I've just read about jtomim plans to merge both branches. When is that going to happen?
3. Is jtomim fork supporting BECH32 addresses, native segwit? Can I mine there with bc1 Bitcoin address?

[Bitcoinpoolextremadura]

Hello,
In the last few days, has the hash power of 2PH been reduced to less than 1PH, who knows why more than 50% of the miners have left?
Thanks.

[bimmylee]

First I am sorry if this was asked but I thought we get a payout when a block has been found. There has been two blocks found by p2pool this week, screenshot is from BlockTrail
https://image.ibb.co/f8wjLS/Blocktrail.jpg


I have been mining with the pool for times the blocks were found with expected payouts
https://image.ibb.co/bMwqun/Pool.jpg

I still haven't received any payout. Do I have to wait 3 days for the payout? Any info will be greatly appreciated.


Moderator's note: This post was edited by frodocooper to remove inline image tags.

[sawa]

...

The last blocks were found in the network jtoomimnet
Here is the scanner of the nodes of this network: http://p2pool.top/scanner/btc-j/


Moderator's note: This post was edited by frodocooper to trim the quote from bimmylee.

[moharni]

The last blocks were found in the network jtoomimnet
Here is the scanner of the nodes of this network: http://p2pool.top/scanner/btc-j/

So is jtoomimnet's network separate from the old network?

Also, is there a website for jtoomimnet's network in which we can monitor activities and connect to nodes? I know only this website: p2pool.org


Moderator's note: This post was edited by frodocooper to remove a nested quote.

[bimmylee]

So if I switch to jtoomimnet's node I lose all the work I put into the p2pool.org node?

[crypto_curious]

Yes. You start from zero again.

[moharni]

Yes. You start from zero again.

Currently, I am not running a local node. Do you know how to connect to a public node of jtoomimnet's network?
Like in the old P2pool nerwork, there is this website http://p2pool.org/stats/node_scanner.php

[tubexc]

 Try this web site https://p2pool.coinpool.pw/

[moharni]

Try this web site https://p2pool.coinpool.pw/

Thank you, this is what I was looking for

[Rabinovitch]

Is there any news about the current attack to Jtoomim's p2pool network?

[jtoomim]

Is there any news about the current attack to Jtoomim's p2pool network?

The majority of p2pool discussion is no longer performed in this thread. It has moved to forum.bitcoin.com, since bitcointalk's moderators wanted only BTC-related discussion in this thread, and most of p2pool's users wanted to be able to discuss everything p2pool related in the same thread instead of having one thread for BTC and a different thread for everyone else.

Information on the current *bug* on the jtoomimnet BTC p2pool can be found in the following thread, along with most other p2pool discussion:

https://forum.bitcoin.com/pools/p2pool-decentralized-dos-resistant-trustless-censorship-resistant-pool-t69932-120.html

I currently believe that this is a compound bug in both bmminer 2.0 and p2pool. Older S9s (bmminer 1.0) seem to be working fine, and newer S9s are also working fine on different pools, but new S9s don't work on BTC p2pool right now as long as the BTC p2pool is the primary pool, in which case bmminer crashes on startup.

[smewnoi]

On may 5, 2018, p2pool-vip was launched with port: 19343
p2pool with port 9334 as well as 9332 continue to work

At the moment:
Actual hashrate: 29.29 PH/s
Global: 39.48 PH/s
Found 3 Block: 11, 17, 22 on may.

We got rid of the problem of disconnecting devices from Bitman and other manufacturers !

Lists of nodes that support this pool:

http://p2pool.top/scanner/btc-vip/
http://www.p2pool.site/btcv.html

To connect, you can write to telegram: https://t.me/p2pool any of the admins above will tell you in what direction to move.

System for admission: prior to confirmation of the hashrate.

We are against:

1. Rent

2. Palheiro

For 1 or 2 point in ban.

If you are a single manner and you do not have the required 500TH +, just on the channel in telegram: https://t.me/p2pool you can find someone to combine your hashrate and come to us on the remote.

We are all waiting !!!

Block:
2018-05-11 18:44:14
https://bitinfocharts.com/bitcoin/block/522202/00000000000000000002726e0d79a257667d1794a064001659db77a1a2415e00
2018-05-17 14:24:43
https://bitinfocharts.com/bitcoin/block/523089/0000000000000000002be8b6954f6930c1d9d1d1e436cdb7db5f1e613c746377
2018-05-22 18:45:22
https://bitinfocharts.com/bitcoin/block/523859/0000000000000000003f0560cee18301fec384fb8b0ab0516dbd44c707833bf0

VIP p2pool was created after many devices have problems with the inability to process work with a large number of workers in coinbase.
The goal is to gather in a single holder of large capacity. This will minimize on a merged pool, the number of worker using p2pool software, to minimize losses through most nearest server to the capacity of miners and of course to combine large power.
This was done by adding verification of the workers to their BTC address.

[ramsis]

All my miners Antminer S9 /Ebit 9+/ Bitfury miner  - are working perfectly!      The port 19343 is constantly monitored by the number of connected miners.

[scopus]

Seven days of work without a break.

[smewnoi]

Seven days of work without a break.

http://p2pool.ru/img/3213.jpg

Well, not 7 days, and on may 5th the start was

[sawa]

Seven days of work without a break.

Well, not 7 days, and on may 5th the start was

This p2pool network runs for more than 7 days. It was launched on May 5