Hashrate RX 570

[vince212]

Exactly, the powersave bios from Anorak.  

CjMapope...

THANKS TO BOTH OF YOU! That is exactly the issue, I just tried putting +10% power... went from 20.6-21.6 to  24.3,  the second card is running at 26 mh

110watts/card.  

I'll be off for the day but I will try pimping a little bit, just to reach the best balance between performance and power usage :DD

THANKS again!!  



Edit: I just tried +14...  cards now runs at 114watts but getting  25.5 to 26 for first card and 26.4 for second ! I'm Lovin' It

That's what you get from those bioses download on the internet... My cards had 25MH/s stock Now 29-31MH/s RX 470/480.

can i use a gigabyte gb elpida bios in xfx 4gb elpida bios? basically different just different brand

it's mainly dependant on the MEMORY type, but the brand has to match tho as well for Anorak's bios's
Honestly, you should just grab that 500 series easy editor someone posted it allows you to copy straps SO easy, and editing a bios custom yourself SEEMS daunting, but its really not, just stick to easy stuff, mem straps, TDP.

Also, don't fear TRYING one of Anorak's on a different brand, if the "sub-system id" is not an EXACT match ATIWinFlash wont do it anyways (well not by GUI,
 and don't FORCE it in CMD or you will regret it! lol)    and ALWAYS back up the original BIOS's first!

i edited my bios copied 1:1500 up to 1:2000 just like what the guides say. i got it up to 25.3mh/s. sadly an oc to the mem clock of even just +50mhz causes gpu errors.
so im stuck at 1100 core clock -96 voltage and stock mem clocks
i saw someone using elpida rams go up to 27 but i would be happy even at 26mh

[CjMapope]

Exactly, the powersave bios from Anorak.  

CjMapope...

THANKS TO BOTH OF YOU! That is exactly the issue, I just tried putting +10% power... went from 20.6-21.6 to  24.3,  the second card is running at 26 mh

110watts/card.  

I'll be off for the day but I will try pimping a little bit, just to reach the best balance between performance and power usage :DD

THANKS again!!  



Edit: I just tried +14...  cards now runs at 114watts but getting  25.5 to 26 for first card and 26.4 for second ! I'm Lovin' It

That's what you get from those bioses download on the internet... My cards had 25MH/s stock Now 29-31MH/s RX 470/480.

can i use a gigabyte gb elpida bios in xfx 4gb elpida bios? basically different just different brand

it's mainly dependant on the MEMORY type, but the brand has to match tho as well for Anorak's bios's
Honestly, you should just grab that 500 series easy editor someone posted it allows you to copy straps SO easy, and editing a bios custom yourself SEEMS daunting, but its really not, just stick to easy stuff, mem straps, TDP.

Also, don't fear TRYING one of Anorak's on a different brand, if the "sub-system id" is not an EXACT match ATIWinFlash wont do it anyways (well not by GUI,
 and don't FORCE it in CMD or you will regret it! lol)    and ALWAYS back up the original BIOS's first!

i edited my bios copied 1:1500 up to 1:2000 just like what the guides say. i got it up to 25.3mh/s. sadly an oc to the mem clock of even just +50mhz causes gpu errors.
so im stuck at 1100 core clock -96 voltage and stock mem clocks
i saw someone using elpida rams go up to 27 but i would be happy even at 26mh

I blame these 570 armor, they are trickier then the rest i swear haha
ya either find a matching Anorak Bios, or just sell them to a pro, or let them mine as is i guess, 2-3 mh/s+ is NICE, but ROI is so good on AMD its not too bad to NOT have it on ONE card (hope you never bought 12 ;p )

its nice you have them at -96 undervolt, at 25.5 is not bad man, prob 8o watts cant complain, try increasing that for stability on clock changes as well

[Mattthev]

I can write it milion times
Do not use those basic straps... Almost no added performance and you are not even able to OC.
My RX 470 Elpida has 30MH/s, Samsung has 30+MH/s.

[matix2711]

I can write it milion times
Do not use those basic straps... Almost no added performance and you are not even able to OC.
My RX 470 Elpida has 30MH/s, Samsung has 30+MH/s.

How u did it? I have ASUS RX570 STRIX 4GB modded bios 1500->2000 GPU 1300->1112 Memory 1750->1850 and i have 26MH/s per card stable and 850W power use. How can I do 27~ MH/s per card stability and lower power use?

[vince212]

I can write it milion times
Do not use those basic straps... Almost no added performance and you are not even able to OC.
My RX 470 Elpida has 30MH/s, Samsung has 30+MH/s.

hi do you know any guides on how to properly edit a bios? i can only see guides saying copy 1500 to 2000 or 1750-2000 etc

saw in anorak they have a lot of bios for each card oc,memshift,power saver. any guides to do those? thanks

[Mattthev]

hi do you know any guides on how to properly edit a bios? i can only see guides saying copy 1500 to 2000 or 1750-2000 etc

saw in anorak they have a lot of bios for each card oc,memshift,power saver. any guides to do those? thanks

I like how people can't searched anything
Do you see my signature? There is a link to my bios mod guide. I think it's easy to understand for everyone.

[Mattthev]

Anorak just copies shit from one box to another in PBE - to do it properly, you need several things.

OhGodADecode, written by my owner and I, will be useful: https://github.com/OhGodACompany/OhGodADecode
You'll want the JEDEC GDDR5 Specification, as you'll need a working knowledge of how GDDR5 functions.
On VBIOS structure, this file is invaluable: http://elixir.free-electrons.com/linux/latest/source/drivers/gpu/drm/amd/include/atombios.h
And this thread should help with general VBIOS structure, as well: http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx

I would love to add something.
OhGodADecode is good tool but SRB Polaris can do it too and it's more easy to use.

[Mattthev]

No it can't.... it can display the actual timing values (tRP, tRFC, etc) from the blob of hex?

Right, from HEX no :/

[luiggybit]

Zero on most, 1 every 10 minutes or so on a couple

Is that the dorrymills moded strap? Can you please check if you get any errors at 2050 MHz?

Yea, and I just said I dont get any errors at 2100 for most of the cards.

@Apnel

I have the same cards, but I'm a bit scared to run the memory at 2100Mhz.

U think this is safe? Whats ur memory mV?

Can't change mem mV, higher voltages is what will really decrease life of an electronic not higher clocks so the only thing you gotta worry about is stability

Can you elaborate a bit on "modified 1425 strap" or point me in the right direction?  I am working with a batch of 570 Sapphire ITX (Elpida).  

ETH: GPU0 27.811 Mh/s, GPU1 30.827 Mh/s, GPU2 29.126 Mh/s, GPU3 30.816 Mh/s, GPU4 30.805 Mh/s

I am running on copy+paste 1500 straps.  GPU0 is the highest ASIC  (78.5%) but won't run stable past 1925mhz.  GPU2 is my lowest ASIC (68.5%) and is stable @ 2000mhz.  The rest are  70%+ and fine @2100.

It bugs me when I can't get 30 out of a card.  I'm willing to learn but having a time finding info.

Like someone else said, ASIC quality doesnt have jack to do with memory. There's batches of memory that simply can't run over 27MH regardless of strap or mods

Can one of u guys, point me where to find that "dorrymills moded strap" for hynnix, cause I searched and cant find it. ty guys!

[luiggybit]

Exactly, the powersave bios from Anorak.  

CjMapope...

THANKS TO BOTH OF YOU! That is exactly the issue, I just tried putting +10% power... went from 20.6-21.6 to  24.3,  the second card is running at 26 mh

110watts/card.  

I'll be off for the day but I will try pimping a little bit, just to reach the best balance between performance and power usage :DD

THANKS again!!  



Edit: I just tried +14...  cards now runs at 114watts but getting  25.5 to 26 for first card and 26.4 for second ! I'm Lovin' It

That's what you get from those bioses download on the internet... My cards had 25MH/s stock Now 29-31MH/s RX 470/480.

Can u share those BIOSes of u?

[luiggybit]

  mmmm hahaha

[CjMapope]

mmmm hahaha

haha before you lose your money let me assure you Wolf can do better than ANY thing you download off the internet.
You will be pressed to find someone in the community that has had more experience in being deep inside AMD GPUs then he
it's true,Noobs just find bios's, copy straps, every PRO miner should learn to make these cards bend to their will themselves

[treasure9]

What powertune number do you use for RX 570 ?
Search didn't return any results.

[Mattthev]

mmmm hahaha

haha before you lose your money let me assure you Wolf can do better than ANY thing you download off the internet.
You will be pressed to find someone in the community that has had more experience in being deep inside AMD GPUs then he
it's true,Noobs just find bios's, copy straps, every PRO miner should learn to make these cards bend to their will themselves

Agree, I haven't seen better bios than Wolf0's one.

BTW can I bet too?

[Mattthev]

I'll do 5% odds on him sharing it, 95% on him not. 1% fee for managing the betting pool! :3

OK will see how it goes, than I might or might not share it

BTW I don't even know which bios are we talking about
I can share some bios... I heard Anoraks have great ones

[noreither]

I'll do 5% odds on him sharing it, 95% on him not. 1% fee for managing the betting pool! :3

OK will see how it goes, than I might or might not share it

BTW I don't even know which bios are we talking about
I can share some bios... I heard Anoraks have great ones

LOL, yeah. But, seriously, one thing I do have to say for Anorak (in a non-joking manner): He does have a well-kept DB. Quality ain't there, but you get what you pay for.

Wolf0,  What would be the aiming hashrate range for a MSI Armor 4gb (hynix memory) and how many watts of power?  

I'll try to play using Matthew's guide (https://bitcointalk.org/index.php?topic=1954245.0)

Thank you =)

[Mattthev]

Wolf0,  What would be the aiming hashrate range for a MSI Armor 4gb (hynix memory) and how many watts of power?  

I'll try to play using Matthew's guide (https://bitcointalk.org/index.php?topic=1954245.0)

Thank you =)

You forget to say what GPU is that.

I wrote it very easy for newbies so you should be able to understand. No magic in there!

[noreither]

doh!

Rx 570

[vince212]

Zero on most, 1 every 10 minutes or so on a couple

Is that the dorrymills moded strap? Can you please check if you get any errors at 2050 MHz?

Yea, and I just said I dont get any errors at 2100 for most of the cards.

@Apnel

I have the same cards, but I'm a bit scared to run the memory at 2100Mhz.

U think this is safe? Whats ur memory mV?

Can't change mem mV, higher voltages is what will really decrease life of an electronic not higher clocks so the only thing you gotta worry about is stability

Can you elaborate a bit on "modified 1425 strap" or point me in the right direction?  I am working with a batch of 570 Sapphire ITX (Elpida).  

ETH: GPU0 27.811 Mh/s, GPU1 30.827 Mh/s, GPU2 29.126 Mh/s, GPU3 30.816 Mh/s, GPU4 30.805 Mh/s

I am running on copy+paste 1500 straps.  GPU0 is the highest ASIC  (78.5%) but won't run stable past 1925mhz.  GPU2 is my lowest ASIC (68.5%) and is stable @ 2000mhz.  The rest are  70%+ and fine @2100.

It bugs me when I can't get 30 out of a card.  I'm willing to learn but having a time finding info.

Like someone else said, ASIC quality doesnt have jack to do with memory. There's batches of memory that simply can't run over 27MH regardless of strap or mods

Can one of u guys, point me where to find that "dorrymills moded strap" for hynnix, cause I searched and cant find it. ty guys!

I never found an RX {4,5}{7,8}0 card I couldn't get to 30. Now... some won't do 30 *stable* because of shit GDDR5 cooling, but that's hardly the RAM's fault.

i have an rx 570 4gb elpida ram. right now i have a noob bios mod just copied 1500 until 2000. i have gpu memory errors even at plus 100 mhz mem clock. mining now at 25mh haha think you can make that hashrate higher?

[treasure9]

My hashrate on nanopool looks like waves, up and down. What could be the reason for that?

https://ibb.co/mR3iSa