jsays
Jr. Member
Offline
Activity: 78
Merit: 7
|
|
September 24, 2018, 09:55:35 PM |
|
Hello, noob here just pointed a T9 to ckpool yesterday morning. I have a full 24hrs in but there seems to be a difference in the reporting.
My miner is reporting AVG 6.5 but the pool is reporting 4.5 up to 5.0 Hashrate.
Is there an additional config needed for the T9
Thank you
1) Is your T9 damaged, only 6.5TH? 2) And you are only looking at Hashrate (1d / 1hr/ 5min / 1min), correct? Don't think it is damaged pops sometimes over 7TH on BTC or antpool. Yes on the 1d. Welcome Edhhr127, studio_mining was right to ask about the state of your device. A T9 with proper power should be pulling ~10.5TH, and I have seen some reported up toward 12.5TH. So, regardless of what you getting on BTC or Antpool, it seems something is amiss with your miner. Were I to speculate wildly, I would guess that only two of your hashboards are working. The next couple questions I would ask are: -Are all hashboards connected and showing on your miner's 'Miner Status' page? Are all showing all of their ASICs? -What power supply are you using? -On your miner, same 'Miner Status' page, do you have a significant number of Rejected shares, versus Accepted? If the former is more than say 1% of the later, then there is certainly something to investigate. Happy hashing!
|
|
|
|
edhhr127
Newbie
Offline
Activity: 8
Merit: 0
|
|
September 24, 2018, 10:20:41 PM Last edit: September 24, 2018, 10:54:38 PM by edhhr127 |
|
Hello, noob here just pointed a T9 to ckpool yesterday morning. I have a full 24hrs in but there seems to be a difference in the reporting.
My miner is reporting AVG 6.5 but the pool is reporting 4.5 up to 5.0 Hashrate.
Is there an additional config needed for the T9
Thank you
1) Is your T9 damaged, only 6.5TH? 2) And you are only looking at Hashrate (1d / 1hr/ 5min / 1min), correct? Don't think it is damaged pops sometimes over 7TH on BTC or antpool. Yes on the 1d. Welcome Edhhr127, studio_mining was right to ask about the state of your device. A T9 with proper power should be pulling ~10.5TH, and I have seen some reported up toward 12.5TH. So, regardless of what you getting on BTC or Antpool, it seems something is amiss with your miner. Were I to speculate wildly, I would guess that only two of your hashboards are working. The next couple questions I would ask are: -Are all hashboards connected and showing on your miner's 'Miner Status' page? Are all showing all of their ASICs? -What power supply are you using? -On your miner, same 'Miner Status' page, do you have a significant number of Rejected shares, versus Accepted? If the former is more than say 1% of the later, then there is certainly something to investigate. Happy hashing! Thank you for the Welcome, I am using bitmain recommended PSU I am below 1% but maybe a bit high at 0.6% All boards running. Did the firmware update when I first got the unit. So just if other come up with an issues; Right now powered down and an resetting. (Edit) Thank you for the help, replaced power supply. Fault must have just shown after power down and reboot to new pool.
|
|
|
|
jsays
Jr. Member
Offline
Activity: 78
Merit: 7
|
|
September 24, 2018, 10:23:32 PM |
|
Hello, noob here just pointed a T9 to ckpool yesterday morning. I have a full 24hrs in but there seems to be a difference in the reporting.
My miner is reporting AVG 6.5 but the pool is reporting 4.5 up to 5.0 Hashrate.
Is there an additional config needed for the T9
Thank you
1) Is your T9 damaged, only 6.5TH? 2) And you are only looking at Hashrate (1d / 1hr/ 5min / 1min), correct? Don't think it is damaged pops sometimes over 7TH on BTC or antpool. Yes on the 1d. Welcome Edhhr127, studio_mining was right to ask about the state of your device. A T9 with proper power should be pulling ~10.5TH, and I have seen some reported up toward 12.5TH. So, regardless of what you getting on BTC or Antpool, it seems something is amiss with your miner. Were I to speculate wildly, I would guess that only two of your hashboards are working. The next couple questions I would ask are: -Are all hashboards connected and showing on your miner's 'Miner Status' page? Are all showing all of their ASICs? -What power supply are you using? -On your miner, same 'Miner Status' page, do you have a significant number of Rejected shares, versus Accepted? If the former is more than say 1% of the later, then there is certainly something to investigate. Happy hashing! Thank you for the Welcome, I am using bitmain recommended PSU I am below 1% but maybe a bit high at 0.6% All boards running. Did the firmware update when I first got the unit. So just if other come up with an issues; Right now powered down and an resetting. One more quick follow-up question...are you running that on 110V power (or 220V)?
|
|
|
|
edhhr127
Newbie
Offline
Activity: 8
Merit: 0
|
|
September 24, 2018, 10:57:21 PM |
|
Hello, noob here just pointed a T9 to ckpool yesterday morning. I have a full 24hrs in but there seems to be a difference in the reporting.
My miner is reporting AVG 6.5 but the pool is reporting 4.5 up to 5.0 Hashrate.
Is there an additional config needed for the T9
Thank you
1) Is your T9 damaged, only 6.5TH? 2) And you are only looking at Hashrate (1d / 1hr/ 5min / 1min), correct? Don't think it is damaged pops sometimes over 7TH on BTC or antpool. Yes on the 1d. Welcome Edhhr127, studio_mining was right to ask about the state of your device. A T9 with proper power should be pulling ~10.5TH, and I have seen some reported up toward 12.5TH. So, regardless of what you getting on BTC or Antpool, it seems something is amiss with your miner. Were I to speculate wildly, I would guess that only two of your hashboards are working. The next couple questions I would ask are: -Are all hashboards connected and showing on your miner's 'Miner Status' page? Are all showing all of their ASICs? -What power supply are you using? -On your miner, same 'Miner Status' page, do you have a significant number of Rejected shares, versus Accepted? If the former is more than say 1% of the later, then there is certainly something to investigate. Happy hashing! Thank you for the Welcome, I am using bitmain recommended PSU I am below 1% but maybe a bit high at 0.6% All boards running. Did the firmware update when I first got the unit. So just if other come up with an issues; Right now powered down and an resetting. One more quick follow-up question...are you running that on 110V power (or 220V)? 110V must have toasted that power supply and the fault shown after reboot to new pool. Replaced the Power and all is fine now. will see how the next 24hr goes now. Thank you so very much for the Help. Ed
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
September 25, 2018, 04:18:36 AM |
|
Yea, having the desktop psu's are nice. Already set up an s7 in the house down clocked with fans at 20% for heat at night. Though it's supposed to warm up to 80 this week.
|
|
|
|
pavesi
Member
Offline
Activity: 83
Merit: 12
|
|
September 26, 2018, 07:14:33 PM Merited by frodocooper (1) |
|
I like the fact that my derp is up, but come on! Block #!?$#%%^*{}
|
|
|
|
MrMaxwell
Jr. Member
Offline
Activity: 71
Merit: 2
|
|
September 27, 2018, 03:56:21 AM |
|
lets go block!
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
September 27, 2018, 07:54:32 PM |
|
Yea, derp is looking good here. %? block beer.
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
September 28, 2018, 06:10:03 AM |
|
Well I've had the beer. ?% Block.
|
|
|
|
edhhr127
Newbie
Offline
Activity: 8
Merit: 0
|
|
September 28, 2018, 10:32:04 PM |
|
Am I missing something coz this test is a fail so far.
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
September 29, 2018, 01:53:50 PM |
|
Am I missing something coz this test is a fail so far.
Test? Still troubleshooting the T9+?
|
|
|
|
edhhr127
Newbie
Offline
Activity: 8
Merit: 0
|
|
September 29, 2018, 02:10:23 PM |
|
Am I missing something coz this test is a fail so far.
Test? Still troubleshooting the T9+? No T9 is fine, kinda meant the 7 days for a block.
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
September 29, 2018, 02:13:26 PM |
|
Computer Genie put a tool together to help with block find "expectation" a number of pages back. We should be due here soon I think. Be a nice payout for everyone thats been around a while.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4200
Merit: 8223
'The right to privacy matters'
|
|
September 29, 2018, 02:15:24 PM |
|
We are under 50ph. Vs over 200ph. So every eight days maybe I will check.
40ph should hit a block in 9 days with normal 100% luck
We are at day 7.
|
|
|
|
gcanelson
Member
Offline
Activity: 110
Merit: 56
|
|
September 29, 2018, 07:45:45 PM Merited by frodocooper (5) |
|
Am I missing something coz this test is a fail so far.
Here is The Test: This is a Human Machine Interface (HMI) test. I shall assume that you are the `H'. Things that can be tested are: Your equipment - you affirm that it is working well. This Pool - it is working well. It operates near the 100% luck rate. You are paid 100% for all the hashing you do. When the Pool has 200PH hashrate, you will be paid less, but more often. Less because you will have done a much smaller percentage of the Pool's overall work. When the Pool is slower, like now, you will be paid more, but less often. The only thing you need to know is that you get paid for all the work that you (and your miners) do.The Pool takes no percentage of your work... That leaves the `H' in the interface... the Machines are working well. Now it is only a test of the Human. We Humans like and look for patterns. The mining of Bitcoin is random. So while we continue to look for patterns that we can use to interpolate and extrapolate the future, it is somewhat of a futile execise. It is a test of your patience. You can probably go find another pool hashing away at a faster rate, but realize immediately that you will be an even smaller percentage of that pool, and most often, the pool operator will happily take a portion of your hashing power as a fee. You are at the right Pool and will be paid for all the work you do. If it takes a little longer than you were hoping, that is the test - the test of your patience... Being human, many of us look for patterns that we think will somehow `influence' the `block gods'. For example, many on this forum seem to think writing several non-alpha-numeric characters with the word `block' may have some magic. I, on the other hand think that if I go outside and do `forestry' related work, it somehow helps the `mining'. I `know' that it has no infuence, I just `believe' that it does...that's what we humans do! So I went out this morning and moved some of last years cut wood to one of the woodsheds that will provide wood for this winter... and coming in this afternoon, the Pool rate has jumped from 32PH to 56PH...Coincidence??? Anyways, you have found the best pool, with lots of helpful people - most of whom have a ritual celebration involving some form of alcohol... we are having fun, and I hope you do, too! A block will only reveal itself when it is ready, and when you are ready... This will Test your Patience, Grasshopper...
|
The block, an obstacle in the path of the weak, became a stepping-stone in the path of the strong.
|
|
|
pavesi
Member
Offline
Activity: 83
Merit: 12
|
|
September 29, 2018, 08:07:51 PM Merited by frodocooper (1) |
|
Am I missing something coz this test is a fail so far.
Here is The Test: This is a Human Machine Interface (HMI) test. I shall assume that you are the `H'. Things that can be tested are: Your equipment - you affirm that it is working well. This Pool - it is working well. It operates near the 100% luck rate. You are paid 100% for all the hashing you do. When the Pool has 200PH hashrate, you will be paid less, but more often. Less because you will have done a much smaller percentage of the Pool's overall work. When the Pool is slower, like now, you will be paid more, but less often. The only thing you need to know is that you get paid for all the work that you (and your miners) do.The Pool takes no percentage of your work... That leaves the `H' in the interface... the Machines are working well. Now it is only a test of the Human. We Humans like and look for patterns. The mining of Bitcoin is random. So while we continue to look for patterns that we can use to interpolate and extrapolate the future, it is somewhat of a futile execise. It is a test of your patience. You can probably go find another pool hashing away at a faster rate, but realize immediately that you will be an even smaller percentage of that pool, and most often, the pool operator will happily take a portion of your hashing power as a fee. You are at the right Pool and will be paid for all the work you do. If it takes a little longer than you were hoping, that is the test - the test of your patience... Being human, many of us look for patterns that we think will somehow `influence' the `block gods'. For example, many on this forum seem to think writing several non-alpha-numeric characters with the word `block' may have some magic. I, on the other hand think that if I go outside and do `forestry' related work, it somehow helps the `mining'. I `know' that it has no infuence, I just `believe' that it does...that's what we humans do! So I went out this morning and moved some of last years cut wood to one of the woodsheds that will provide wood for this winter... and coming in this afternoon, the Pool rate has jumped from 32PH to 56PH...Coincidence??? Anyways, you have found the best pool, with lots of helpful people - most of whom have a ritual celebration involving some form of alcohol... we are having fun, and I hope you do, too! A block will only reveal itself when it is ready, and when you are ready... This will Test your Patience, Grasshopper... Anyone getting the same idea I am... Lets all drink lots of beer/whisky, take gcanelson and tie him to a tree and paint all the non-alpha chars to his chest.. Ya.. that should surly bring a block our way
|
|
|
|
gcanelson
Member
Offline
Activity: 110
Merit: 56
|
|
September 29, 2018, 09:00:50 PM |
|
Anyone getting the same idea I am... Lets all drink lots of beer/whisky, take gcanelson and tie him to a tree and paint all the non-alpha chars to his chest.. Ya.. that should surly bring a block our way Anyone getting the same idea I am? That pavesi needs the patience test more than ed... Also... Does raking leaves count as `forestry related' work # ? BTC Block?
|
The block, an obstacle in the path of the weak, became a stepping-stone in the path of the strong.
|
|
|
philipma1957
Legendary
Offline
Activity: 4200
Merit: 8223
'The right to privacy matters'
|
|
September 30, 2018, 12:18:42 AM |
|
we are well under 100% so no complaints that it is too long are to be tolerated!!
edit we are at 112% {"runtime": 5270355, "lastupdate": 1538267025, "Users": 324, "Workers": 4533, "Idle": 605, "Disconnected": 429} {"hashrate1m": "56.7P", "hashrate5m": "56.6P", "hashrate15m": "56.6P", "hashrate1hr": "56.5P", "hashrate6hr": "50.7P", "hashrate1d": "44P", "hashrate7d": "70.9P"} {"SPS1m": 1.05e3, "SPS5m": 1.06e3, "SPS15m": 1.06e3, "SPS1h": 1.06e3} {"diff": "112.3", "accepted": 8029662191161, "rejected": 318395150489, "lns": 35763166759532.0, "herp": 35763166759532.0, "reward": 12.73714287} So we can be inventive about the complaints. Here is an inventive complaint: I drove to six flags great adventure today it is only 13 miles from my house.
It was soooo crowded it took 90 minutes to drive the 13 miles and enter the parking lot only to be turned away for no open spots. took 20 minutes to leave the lot and 15 more to drive home so about 2 hours and 5 minutes to do nothing at all.
and that is still 90x faster then we have been waiting for this mofo block!!
|
|
|
|
gcanelson
Member
Offline
Activity: 110
Merit: 56
|
|
September 30, 2018, 12:34:24 AM Merited by frodocooper (1) |
|
Here is an inventive complaint: I drove to six flags great adventure today it is only 13 miles from my house.
It was soooo crowded it took 90 minutes to drive the 13 miles and enter the parking lot only to be turned away for no open spots. took 20 minutes to leave the lot and 15 more to drive home so about 2 hours and 5 minutes to do nothing at all.
and that is still 90x faster then we have been waiting for this mofo block!!
Gold Star for the inventive complaint - but I must ask... While you were doing nothing for 2 hours and 5 minutes, weren't your miners hashing shares? . . . Touchdown Miners! \o/
|
The block, an obstacle in the path of the weak, became a stepping-stone in the path of the strong.
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
September 30, 2018, 06:31:17 AM |
|
Complain? Why? I probably need a steak and not be drinking all this bread. Beer block % ?
|
|
|
|
|