SRBPolaris V3.5 - BIOS editor for AMD RX4XX and RX5XX cards

[doktor83]

dang - my card is still unknown with 2.63

XFX 560 4GB

P/N 113-P21_XT_4G_D5_170217_HM_SF
BIOS C98121 Polaris21 XT A1 GDDR5 256Mx32 4GB 214e/300m

checksum 0x7B
FW Signature 4D4F5441
VendorID 1002
DeviceID 67FF
Sybsystem VendorID 1682

memory types:
Micron
SK Hynix

still... i am going to send you some coinage to say thanks for your work

Thanks for that
YOu could also send me your original bios, and will add support for it

[bond007taz]

dang - my card is still unknown with 2.63

XFX 560 4GB

P/N 113-P21_XT_4G_D5_170217_HM_SF
BIOS C98121 Polaris21 XT A1 GDDR5 256Mx32 4GB 214e/300m

checksum 0x7B
FW Signature 4D4F5441
VendorID 1002
DeviceID 67FF
Sybsystem VendorID 1682

memory types:
Micron
SK Hynix

still... i am going to send you some coinage to say thanks for your work

Thanks for that
YOu could also send me your original bios, and will add support for it

I sent you 2 PM's one with the XFX 560 bios and one for a Powercolor 560 bios that both come up as unknown card

note - not sure if you are getting my PM's - it shows me as a NOOB still

[bond007taz]

noob question - if i flash the bios and because it says unknown card, and the GPU and MEM frequencies are not showing a value and I update the bios and then flash it, will it brick my card?

[doktor83]

I got your bioses, will look into them today, sorry did not have time.

[doktor83]

V2.64

- Added support for PowerColor RX560 4G
- Added support for Xfx RX560 4G
- Added support for Msi RX560 4G

https://mega.nz/#F!TVgGHQZS!yfmtIvbF67iS4QrEJqb26g

[doktor83]

noob question - if i flash the bios and because it says unknown card, and the GPU and MEM frequencies are not showing a value and I update the bios and then flash it, will it brick my card?

When card is displayed as unknown, you still can edit everything that is not disabled, save the bios and flash it.
It shouldn't brick your card because the values that were not detected aren't touched/changed in bios at all.

[zidansz]

i also get unknown card
my bios here
https://www.techpowerup.com/vgabios/190113/190113

[cougarmaster]

Hi All,

   I am new to mining and have a few rigs. I just bought a couple of Saphhire Pulse with 6pin power connector RX560 4GB. In the initial use of the card was out of the box 11.xx MH/s and changed the bios by copying 1750 - > 1825 and 2000 and set max memory speed to 2200 all other untouched. This has gone up to 15.6 MH/s with power at about 45 - 50 watts. Already running for 12 hours and temp at 64 - 67c with 60% fan speed This is the bios maybe you can download to test. Also using Claymore miner 9.4.

https://files.2e-animate.com:8442/s/PSqbYDoGi7qWrR7

This link will not be here forever maybe max will be here for 2-3 days. Hope this will help you out.

[doktor83]

15.6mhs is very nice for rx560 card 

[cougarmaster]

Hi all,

    Just to update on the tuning of the cards running at 15.xx MH/s with GPU at 1000Mhz RAM at 1990Mhz Power limit set to -5 fan speed set to 60% temps are at about 57c at 40watts all using MSI Afterburner.

[sedde]

I am willing to pay someone to undervolt my cards to my specifications so i can run a cool linux rig.

Anyone interested even the op, hit me up.

[exofun]

Hello,
please can someone add support to bios editor for "Gigabyte Radeon RX 560 GAMING OC 4G"
http://imgur.com/l8To1gF
I can open bios file. But if i try to change memory clock and that flash bios something is wrong with drivers after reboot. There is a yellow exclamation mark in devices manager on Radeon rx560. GPU running like in safemode.

My original bios backup https://www.techpowerup.com/vgabios/193045/193045

Realy thanks for any solutions

[doktor83]

you don't have a problem with the bios editor, you have a problem with the video drivers you are using.

[exofun]

Thanks for reply man. But with original bios works all fine. This problem is only if i update edited bios.

[Branko]

Hi all,

    Just to update on the tuning of the cards running at 15.xx MH/s with GPU at 1000Mhz RAM at 1990Mhz Power limit set to -5 fan speed set to 60% temps are at about 57c at 40watts all using MSI Afterburner.

Sshot or it didn't happen

[zhangyx1]

@doktor83

new bios powercolor amd rx 5460 2g (hynix )

http://www.filedropper.com/dilan462hy

thx

[doktor83]

@doktor83

new bios powercolor amd rx 5460 2g (hynix )

http://www.filedropper.com/dilan462hy

thx

This is a red dragon 460 2g, not 560.
Will add support soon.

[doktor83]

V2.65

- Added support for PowerColor RX460 2G
- Fixed a bug with VDDC pointer change

https://mega.nz/#F!TVgGHQZS!yfmtIvbF67iS4QrEJqb26g

[blissz]

Great editor! I finally managed to set the correct voltage on my msi rx480 without having to set it in the claymore miner. This means I can now run my rig undervolted in linux (I guess). Will send some "support" when it runs ok in linux. Thanks for this!

hmmz cheered too early. Still got no succes: when I set 800mv as voltage it runs at about 880mv. (consumes upto 100watt more for 5 cards). Any idea howto fix this?

[Branko]

There is also Gigabyte RX 560 card with hynix memory, this is bios for it:

https://www.techpowerup.com/vgabios/192228/192228

Funny part is, it has strap for 2250, but you can't OC it that high
through Wattman

I wonder which version is better, one with micron, or hynix memory