|
doktor83 (OP)
|
 |
June 20, 2017, 05:09:38 AM |
|
dang - my card is still unknown with 2.63  XFX 560 4GB P/N 113-P21_XT_4G_D5_170217_HM_SF BIOS C98121 Polaris21 XT A1 GDDR5 256Mx32 4GB 214e/300m checksum 0x7B FW Signature 4D4F5441 VendorID 1002 DeviceID 67FF Sybsystem VendorID 1682 memory types: Micron SK Hynix still... i am going to send you some coinage to say thanks for your work Thanks for that  YOu could also send me your original bios, and will add support for it  |
|
|
|
|
|
|
|
|
|
|
|
|
"Your bitcoin is secured in a way that is physically impossible for others to access, no matter for what reason, no matter how good the excuse, no matter a majority of miners, no matter what." -- Greg Maxwell
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
bond007taz
Newbie
 Offline
Activity: 26
Merit: 0
|
|
June 21, 2017, 12:12:51 AM |
|
dang - my card is still unknown with 2.63 XFX 560 4GB P/N 113-P21_XT_4G_D5_170217_HM_SF BIOS C98121 Polaris21 XT A1 GDDR5 256Mx32 4GB 214e/300m checksum 0x7B FW Signature 4D4F5441 VendorID 1002 DeviceID 67FF Sybsystem VendorID 1682 memory types: Micron SK Hynix still... i am going to send you some coinage to say thanks for your work Thanks for that YOu could also send me your original bios, and will add support for it I sent you 2 PM's one with the XFX 560 bios and one for a Powercolor 560 bios that both come up as unknown card note - not sure if you are getting my PM's - it shows me as a NOOB still |
|
|
|
|
bond007taz
Newbie
Offline
Activity: 26
Merit: 0
|
|
June 21, 2017, 03:21:14 AM |
|
noob question - if i flash the bios and because it says unknown card, and the GPU and MEM frequencies are not showing a value and I update the bios and then flash it, will it brick my card?
|
|
|
|
|
|
doktor83 (OP)
|
|
June 21, 2017, 05:16:00 AM |
|
I got your bioses, will look into them today, sorry did not have time.
|
|
|
|
|
|
|
doktor83 (OP)
|
|
June 21, 2017, 01:24:31 PM |
|
noob question - if i flash the bios and because it says unknown card, and the GPU and MEM frequencies are not showing a value and I update the bios and then flash it, will it brick my card?
When card is displayed as unknown, you still can edit everything that is not disabled, save the bios and flash it. It shouldn't brick your card because the values that were not detected aren't touched/changed in bios at all. |
|
|
|
|
|
cougarmaster
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 25, 2017, 03:39:02 AM
Last edit: June 25, 2017, 03:56:00 AM by cougarmaster |
|
Hi All, I am new to mining and have a few rigs. I just bought a couple of Saphhire Pulse with 6pin power connector RX560 4GB. In the initial use of the card was out of the box 11.xx MH/s and changed the bios by copying 1750 - > 1825 and 2000 and set max memory speed to 2200 all other untouched. This has gone up to 15.6 MH/s with power at about 45 - 50 watts. Already running for 12 hours and temp at 64 - 67c with 60% fan speed This is the bios maybe you can download to test. Also using Claymore miner 9.4. https://files.2e-animate.com:8442/s/PSqbYDoGi7qWrR7This link will not be here forever maybe max will be here for 2-3 days. Hope this will help you out. |
|
|
|
|
|
doktor83 (OP)
|
|
June 25, 2017, 06:25:13 AM |
|
15.6mhs is very nice for rx560 card |
|
|
|
cougarmaster
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 25, 2017, 12:16:25 PM |
|
Hi all,
Just to update on the tuning of the cards running at 15.xx MH/s with GPU at 1000Mhz RAM at 1990Mhz Power limit set to -5 fan speed set to 60% temps are at about 57c at 40watts all using MSI Afterburner.
|
|
|
|
|
sedde
Newbie
Offline
Activity: 43
Merit: 0
|
|
June 25, 2017, 08:58:10 PM |
|
I am willing to pay someone to undervolt my cards to my specifications so i can run a cool linux rig.
Anyone interested even the op, hit me up.
|
|
|
|
|
exofun
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 27, 2017, 03:36:01 PM
Last edit: June 27, 2017, 04:15:16 PM by exofun |
|
Hello, please can someone add support to bios editor for "Gigabyte Radeon RX 560 GAMING OC 4G" http://imgur.com/l8To1gF I can open bios file. But if i try to change memory clock and that flash bios something is wrong with drivers after reboot. There is a yellow exclamation mark in devices manager on Radeon rx560. GPU running like in safemode. My original bios backup https://www.techpowerup.com/vgabios/193045/193045Realy thanks for any solutions |
|
|
|
|
|
doktor83 (OP)
|
|
June 27, 2017, 06:39:33 PM |
|
you don't have a problem with the bios editor, you have a problem with the video drivers you are using.
|
|
|
|
exofun
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 27, 2017, 07:10:14 PM |
|
Thanks for reply man. But with original bios works all fine. This problem is only if i update edited bios. |
|
|
|
|
|
Branko
|
|
June 28, 2017, 06:28:17 AM |
|
Hi all,
Just to update on the tuning of the cards running at 15.xx MH/s with GPU at 1000Mhz RAM at 1990Mhz Power limit set to -5 fan speed set to 60% temps are at about 57c at 40watts all using MSI Afterburner.
Sshot or it didn't happen |
|
|
|
|
|
|
|
doktor83 (OP)
|
|
June 28, 2017, 01:26:16 PM |
|
This is a red dragon 460 2g, not 560. Will add support soon. |
|
|
|
|
|
|
blissz
|
|
June 29, 2017, 11:24:42 AM
Last edit: June 29, 2017, 02:46:44 PM by blissz |
|
Great editor! I finally managed to set the correct voltage on my msi rx480 without having to set it in the claymore miner. This means I can now run my rig undervolted in linux (I guess). Will send some "support" when it runs ok in linux. Thanks for this!
hmmz cheered too early. Still got no succes: when I set 800mv as voltage it runs at about 880mv. (consumes upto 100watt more for 5 cards). Any idea howto fix this?
|
|
|
|
|
|
Branko
|
|
June 29, 2017, 05:31:58 PM |
|
There is also Gigabyte RX 560 card with hynix memory, this is bios for it: https://www.techpowerup.com/vgabios/192228/192228Funny part is, it has strap for 2250, but you can't OC it that high through Wattman I wonder which version is better, one with micron, or hynix memory |
|
|
|
|
|
