teek
|
|
May 03, 2013, 08:27:42 PM |
|
anyone elses shipment "on hold" ? also i signed up for e-mail notification and did not receive a more detailed e-mail as some are saying..
were is your shipment on hold? You got 10 blades, right. Is it been shipped in single box? e-mail notifications - waste of time, it will not provide more detailed info then you can see on web site. yeah friedcat confirmed there is some customs issue and he is dealing with it.. hope it gets moving asap! actually i just checked again, he must have got it sorted out because it appears to be on the move now
|
|
|
|
desired_username
|
|
May 03, 2013, 08:36:38 PM |
|
I think it would be benefical if we don't pursue this matter further. It's just pointless noise.
Can anyone please confirm the dimensions of the block erupters?
Did you find out the dimensions? i too would like to know before they arrive Thanks! That's what I found: Hasher size: 233mm x 116mm with a 227mm x 100mm x 19mm heat sink attached to its back Power module size: 192mm x 89mm Ethernet controller size: 86mm x 40mm
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
May 03, 2013, 11:45:09 PM |
|
Mine is on a plane from HK to Europe as we speak, but won't be in my hands until Tuesday?! [I called to ask] All the cabling and wiring ready, I can be up and running in 2 minutes once I have my blades.
|
|
|
|
Caesium
|
|
May 03, 2013, 11:56:48 PM |
|
Yeah, they'll land in Germany or something first I guess, move to the UK over the weekend with some luck, but then Bank Holiday on Monday, so Tuesday is the earliest we can hope for. What number did you call for info, I'll check too
|
|
|
|
Noitev
|
|
May 04, 2013, 12:18:49 AM |
|
Mine is on a plane from HK to Europe as we speak, but won't be in my hands until Tuesday?! [I called to ask] All the cabling and wiring ready, I can be up and running in 2 minutes once I have my blades. For some awesome reason, I'm getting mine on monday. Strange considering I'm literally as far away from china as you can be...
|
|
|
|
radiumsoup
|
|
May 04, 2013, 12:40:07 AM |
|
For some awesome reason, I'm getting mine on monday. Strange considering I'm literally as far away from china as you can be...
Argentina? (The Moon?)
|
PGP fingerprint: 0x85beeabd110803b93d408b502d39b8875b282f86
|
|
|
Noitev
|
|
May 04, 2013, 12:47:11 AM |
|
For some awesome reason, I'm getting mine on monday. Strange considering I'm literally as far away from china as you can be...
Argentina? (The Moon?) I'd answer, but the light won't reach you until tomorrow.
|
|
|
|
bclcjunkie
|
|
May 04, 2013, 01:19:58 AM |
|
Thanks! Appreciate the answer! hey guys, can anyone point me in the right direction in terms of electrically wiring this board? https://docs.google.com/document/d/1VMO3VfIBy3KIwUaaQ8XhKrSVEbXeeMEqsVhhk6Bz9io/edit?pli=1so the doc says this: 1. The two poles for the positive polarity are identical when cabling from the PSU, so are those for the negative polarity. i'll be getting myself a psu with 12v/10a output so when i bare the wires, how will i know which wire goes into which hole? the picture below belongs to LainZ and i'm trying to figure out how to wire the board when it arrives... look at another side of the blade. You will see "+ + - -" marks. So + goes to + and - to -.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
|
May 04, 2013, 01:23:39 AM |
|
Yeah, they'll land in Germany or something first I guess, move to the UK over the weekend with some luck, but then Bank Holiday on Monday, so Tuesday is the earliest we can hope for. What number did you call for info, I'll check too http://www.dhl.co.uk/en/contact_centre/contact_express.html
|
|
|
|
drlatino999
|
|
May 04, 2013, 03:22:27 AM |
|
Mine will be hear monday afternoon, called DHL Customer Service and got my shipping information corrected.
|
Sappers clear the way
|
|
|
drlatino999
|
|
May 04, 2013, 03:22:53 AM |
|
Mine will be hear monday afternoon, called DHL Customer Service and got my shipping information corrected.
Damn it, now the world will see I can't choose the correct here/hear.
|
Sappers clear the way
|
|
|
michelet
Full Member
Offline
Activity: 170
Merit: 100
www.easyha.sh
|
|
May 04, 2013, 06:11:05 AM |
|
Mine is on a plane from HK to Europe as we speak, but won't be in my hands until Tuesday?! [I called to ask] All the cabling and wiring ready, I can be up and running in 2 minutes once I have my blades. Same to me, they say it will arrive Tuesday. I am in Europe too.
|
|
|
|
michelet
Full Member
Offline
Activity: 170
Merit: 100
www.easyha.sh
|
|
May 04, 2013, 06:20:02 AM |
|
Thanks! Appreciate the answer! hey guys, can anyone point me in the right direction in terms of electrically wiring this board? https://docs.google.com/document/d/1VMO3VfIBy3KIwUaaQ8XhKrSVEbXeeMEqsVhhk6Bz9io/edit?pli=1so the doc says this: 1. The two poles for the positive polarity are identical when cabling from the PSU, so are those for the negative polarity. i'll be getting myself a psu with 12v/10a output so when i bare the wires, how will i know which wire goes into which hole? the picture below belongs to LainZ and i'm trying to figure out how to wire the board when it arrives... look at another side of the blade. You will see "+ + - -" marks. So + goes to + and - to -. Take a look here: https://bitcointalk.org/index.php?topic=178275.msg1928057#msg1928057
|
|
|
|
candoo
|
|
May 04, 2013, 11:47:50 AM |
|
Its in germany! Saturday, May 04, 2013 Location Time 12 Customs status updated LEIPZIG - GERMANY 10:12 11 Departed Facility in HONG KONG - HONG KONG HONG KONG - HONG KONG 04:34 10 Processed at HONG KONG - HONG KONG HONG KONG - HONG KONG 04:05 Friday, May 03, 2013 Location Time 9 Clearance processing complete at HONG KONG - HONG KONG HONG KONG - HONG KONG 12:43 8 Processed at HONG KONG - HONG KONG HONG KONG - HONG KONG 12:43 7 Arrived at Sort Facility HONG KONG - HONG KONG HONG KONG - HONG KONG 12:38 6 Customs status updated HONG KONG - HONG KONG 11:05 5 Departed Facility in SHENZHEN - CHINA, PEOPLES REPUBLIC SHENZHEN - CHINA, PEOPLES REPUBLIC 10:37 4 Processed at SHENZHEN - CHINA, PEOPLES REPUBLIC SHENZHEN - CHINA, PEOPLES REPUBLIC 10:36 3 Customs status updated LEIPZIG - GERMANY 04:03 2 Arrived at Sort Facility SHENZHEN - CHINA, PEOPLES REPUBLIC SHENZHEN - CHINA, PEOPLES REPUBLIC 09:29 Thursday, May 02, 2013 Location Time 1 Shipment picked up SHENZHEN - CHINA, PEOPLES REPUBLIC 21:58
|
Einer trage des andern Last, so werdet ihr das Gesetz Christi erfüllen.
|
|
|
phiz
Newbie
Offline
Activity: 21
Merit: 0
|
|
May 04, 2013, 11:53:22 AM |
|
Is it really necessary to loop back both terminals like this? I thought friedcat had said these were for chaining boards (ie. are connected already on the PCB). My plan was to use a 6 pin PCIe connector from an ATX PSU and simply twist the three wires together to connect just one +ve and -ve input.
|
|
|
|
Pinwheel
|
|
May 04, 2013, 02:37:28 PM |
|
Is it really necessary to loop back both terminals like this? I thought friedcat had said these were for chaining boards (ie. are connected already on the PCB). My plan was to use a 6 pin PCIe connector from an ATX PSU and simply twist the three wires together to connect just one +ve and -ve input. 2 wires will work the same, I connected first all 4 points, but now changed to two wires
|
Tom Waits: We should just start as soon as possible cause we might catch a rabbit before we have our pants on. (Juxtapoz)
|
|
|
bclcjunkie
|
|
May 05, 2013, 02:47:20 AM |
|
awesome! thanks michelet!
|
|
|
|
bclcjunkie
|
|
May 05, 2013, 02:49:30 AM |
|
pinwheel, has it been working well for you so far? so we just need to use 2 wires right? Is it really necessary to loop back both terminals like this? I thought friedcat had said these were for chaining boards (ie. are connected already on the PCB). My plan was to use a 6 pin PCIe connector from an ATX PSU and simply twist the three wires together to connect just one +ve and -ve input. 2 wires will work the same, I connected first all 4 points, but now changed to two wires
|
|
|
|
Noitev
|
|
May 05, 2013, 04:57:00 AM |
|
Is it ironic that each bitcoin I mine with this will be used to buy asicminer shares? lol
|
|
|
|
Pinwheel
|
|
May 05, 2013, 07:42:17 AM |
|
pinwheel, has it been working well for you so far? so we just need to use 2 wires right? Is it really necessary to loop back both terminals like this? I thought friedcat had said these were for chaining boards (ie. are connected already on the PCB). My plan was to use a 6 pin PCIe connector from an ATX PSU and simply twist the three wires together to connect just one +ve and -ve input. 2 wires will work the same, I connected first all 4 points, but now changed to two wires yes, two wires working perfect, what I have is very strong wires, no any temperature rise have been observed on wires iteself. I'm mining and testing it for about a week now. Also fixed 3 USB fans for cooling. Weather is really hot here. Miining around 10200 mhs on one blade and 9800 mhs on another. Probably will do some overclocking next week. All well, working perfect. One thing is, it seems miner talking to stratum proxy on http and there is no way to change it, maybe in proxy it self there is some way around, but I doubt that. It is important task to get ASICminer work with stratum proxy. Perhaps friedcat can bring so clarification. Most pools moving on stratum now and charging higher comission for those who mine on getwrok servers.
|
Tom Waits: We should just start as soon as possible cause we might catch a rabbit before we have our pants on. (Juxtapoz)
|
|
|
|