cingibi
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 23, 2018, 09:30:26 AM |
|
|
|
|
|
Cyric78
Newbie
Offline
Activity: 6
Merit: 0
|
|
January 23, 2018, 04:23:07 PM |
|
Hey guys.. I picked up a couple Asus Radeon RX 560 4gb Evo Oc edition cards, and am getting about 13Mh/s each just with wattman..
My question is, when I try to mod the bios, the memory only goes to 1500, and apparently there is on 14cus..
Is there anything I can do to get the memory past 2000, or should I just smile with what I've gotten?
If you upload your VBIOS, I can try to unlock the 16 CU´s. Here is my original bios.. https://drive.google.com/open?id=1FYrVYZh47zfT3MVqlPcot4RlTBDJxWZcI appreciate it man! Any ideas on ways to get the mem above 1500? Flashing a bios from a similar card by chance? Here is the modded BIOS: http://www46.zippyshare.com/v/U8tUsqXA/file.htmlPlease report the result. Good luck Well, it looks like Windows doesn't like it.. Its not seen in claymore, i've got billions of memory errors, and negative core power according to HWinfo64.. lol Don't know what went wrong, but I'll reflash the stock one and keep chugging along! Thanks again man! I also modded your memory strap before . That´s the reason why claymore gets crazy ... maybe. Do you saw the 1024 shaders in GPU-Z or HWInfo ? This version only has unlocked shaders...maybe it works. http://www33.zippyshare.com/v/VgaoRzk9/file.htmlGood luck I'll give that one a shot.. I couldn't get the card to recognize as a 560, just a generic display, so something wasn't happy, but I'll try this one also and let you know I hope you use the newest AMD/ATI Pixel Clock Patcher to run the modded BIOS: https://www.monitortests.com/atikmdag-patcher-1.4.6.zipI did.. but I may not have been giving windows enough time to load the drivers properly.. lol I've been getting very impatient with this rig..As it turns out, building a mining rig from mostly scrap parts, and making it run as fast and as stable as possible is quite a bit more difficult than building most anything else out of scrap parts... hahahaha I'll give the bios a try again later, now that I've gotten 4 570's running at 28.5, and these 560's running at 11.5 stable for almost 24 hrs.. lets see if I can mess it up later.. hahaha
|
|
|
|
Xmanek
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 23, 2018, 06:39:12 PM |
|
Hello, i have 6x rx 560 4 gb this type : https://www.asus.com/us/Graphics-Cards/RX560-O4G-EVO/specifications/i have stable 11,4 mh with standard bios and my qestion is can i have more hs/s with moded bios ? and is there moded bios for my card ?? if yes pls can you post here link to download sorry for my english thanks for you reply
|
|
|
|
Branko
|
|
January 23, 2018, 10:11:50 PM |
|
Theres always possibility that there are 2 or more revisions of the same card, or different memory even for same revision, so its wise to both check all your cards, and also to post original bios if you want someone to help you
|
|
|
|
Xmanek
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 24, 2018, 07:19:24 AM |
|
Theres always possibility that there are 2 or more revisions of the same card, or different memory even for same revision, so its wise to both check all your cards, and also to post original bios if you want someone to help you Hello, ok i post original bios after to return home from work but you want to post all bios of my card but only one ?? i buy all card in one time and all have same pakage thanks for you reply sorry for my english
|
|
|
|
Branko
|
|
January 24, 2018, 10:56:09 AM |
|
Hello,
ok i post original bios after to return home from work but you want to post all bios of my card but only one ??
i buy all card in one time and all have same pakage
thanks for you reply
sorry for my english
You should use GPU-Z to check if all of your cards have same memory (hynix, micron, elpida or samsung), thats all that matters...memory straps are different...only need 1 bios if all 6 cards have same memory type
|
|
|
|
Amkolino
Newbie
Offline
Activity: 42
Merit: 0
|
|
January 24, 2018, 11:17:20 AM |
|
Hello Gents.
I'm thinking to buy 2GB versions of RX 560 for mining new ETH coins without DAG problem like Ubiq, Expanse, Ellaism etc..
So may you advise me one of below vendors please ;
Sapphire RX560 2G D5 PULSE 11267-19-20G - Single Fan ASUS Radeon RX 560 2GB GDDR5 OC - Dual Fan Gigabyte AMD RX 560 OC 2GB - Single Fan
I need your advise between that cards..
Thank you Best Regards
I'd rather pick up some 1050 ti 4gb. So you can mine everything out there. And if Eth is not fine (its like 14-15 mh/s after oc), you can still mine something else.
|
|
|
|
|
tufanv
Member
Offline
Activity: 66
Merit: 14
|
|
January 24, 2018, 04:00:52 PM |
|
I think , rx series for eth is no more profitable. It shows around $2 profit / day, 1080ti is much more valuable now. But We can't find it anywhere in our country or even in Amazon.
|
|
|
|
Xmanek
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 24, 2018, 05:23:29 PM |
|
Hello,
ok i post original bios after to return home from work but you want to post all bios of my card but only one ??
i buy all card in one time and all have same pakage
thanks for you reply
sorry for my english
You should use GPU-Z to check if all of your cards have same memory (hynix, micron, elpida or samsung), thats all that matters...memory straps are different...only need 1 bios if all 6 cards have same memory type Hello, i watch witch gpuz all of my card have micron memory and there is my original bios http://www100.zippyshare.com/v/Ubo6i4Fq/file.htmlwith new driver i can take 13,1 with original bios with overclock and this is stable pls can mod my original bios to take more mh and one more qestion when i flash bios i do this with only one card in same time not more gpu in motherboard ? thx for help me
|
|
|
|
ChunkySoup
Newbie
Offline
Activity: 19
Merit: 0
|
|
January 25, 2018, 01:42:10 AM |
|
A noob looking for a little guidance if you could.
I picked up the ASUS Rx 560 OC Edition and threw it into an old spare PC with intention of learning more about mining and figured it was relatively cheap so if it doesn't work out or I fry the card I am not out too much money. I am using Claymores dual miner and the August edition of the AMD mining drivers on windows 10. Two things that are happening.
1) I run Claymores script and the card spins up to 90°c with the fans at 100% before shutting down about a minute later. I moved the rig to the garage as it's around 0°c and I added an intake case fan blowing directly at it. Card is still averaging 86°c while the interior of the case is hovering around 10°c. This does not seem right and my guess will burn the card out pretty quickly.
2) Daily average from ethermine.org is around 7MH/s which is about half of what is reported heere on this thread.
So does anyone have any tips, tricks or a stable BIOS update that would help either of these issues (perferrably both)? Also given my noobness what are straps and strat referring to? I am sure there are more questions I will need to ask but baby steps.
if I get this figured out then I will start to ramp up with a number of cards and an open air rig.
Thanks for any help you can give.
ChunkySoup
https://mining.help/Ok...so I did pretty much all of that...there are a few things I had already done, I couldn't do or weren't available anymore but man it still ramps up right to 90° and I am getting just under 10MH/s on average. I tried setting the limit on the temp but overdrive Ntool throttled down the fans so much it crashed. The temp in my garage was -3° so I set the min and max of the fans higher and it seems relatively stable but I can't get it to push any higher or be any cooler....sigh... Try earlier versions of Claymore, some people report better results with older versions on less powerful cards, or try mining a CryptoNight coin, they use less power: https://bitcointalk.org/index.php?topic=638915.0https://bitcointalk.org/index.php?topic=1612329.0First off I want to say "Thank you" for your willingness to help. I really do appreciate it. Quick question. As I said beofre this is an old psare machine so this card is running on a PCi-E x16 2.0 slot. Could that be part of the cause? If you use a riser with multiple cards are the 1x slots you are using all PCI-E 3.0 as well? If that is actually the case then I have to start weighing in the cost of a new rig. Thanks again. Load latest AMD drivers and select 'compute' mode, don't know if it's an option for the RX560, but it may be there. You may need to flash the BIOS to get a better hashrate, have a look here https://bitcointalk.org/index.php?topic=1882656.0If you mod the BIOS you may also need to run this "atikmdag-patcher-1.4.6.zip" https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-PatcherThe type of PCI-E slot will make no difference to your mining hashrate. I have used a variety of motherboards, from old to new, and not had any many problems with the hashrates. So unfortunately no Compute option comes up for the card the way that I have seen it come up for others...even with brand new drivers. I tried the 15.12 drivers Claymore suggests but they wouldn't even recognize the card. I download brand new drivers and did what i could with Wattman. I have to admit I am a little nervous flashing the bios with that tool as it keeps coming up as a virus when I download it. Some of the comments say its ok...some not....I am a little on the fence on that one. Before I tried downloading it I backed up the bios on the card and it came up Baffin.rom so even though I bought an RX 560 it sure looks like a bought a rebadged 460 unless you guys know any different? As for Bios modding....that is a little too far out of my league. I can post mine if someone would be kind enough to help me.
|
|
|
|
Amkolino
Newbie
Offline
Activity: 42
Merit: 0
|
|
January 25, 2018, 07:44:12 AM |
|
@xmanek:
If you flash the bios for one GPU it is only applied to one GPU.
|
|
|
|
Xmanek
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 25, 2018, 01:23:14 PM |
|
@xmanek:
If you flash the bios for one GPU it is only applied to one GPU.
Hello, ok and pls can you help me to mob my original bios ?? or roland thanks a lot
|
|
|
|
R0land
Jr. Member
Offline
Activity: 208
Merit: 3
|
|
January 25, 2018, 01:58:51 PM |
|
@xmanek:
If you flash the bios for one GPU it is only applied to one GPU.
Hello, ok and pls can you help me to mob my original bios ?? or roland thanks a lot There are so many threads explaining that ! You only must copy the 1625 or lower straps to work well.
|
|
|
|
Xmanek
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 25, 2018, 03:24:19 PM Last edit: January 25, 2018, 03:39:33 PM by Xmanek |
|
@xmanek:
If you flash the bios for one GPU it is only applied to one GPU.
Hello, ok and pls can you help me to mob my original bios ?? or roland thanks a lot There are so many threads explaining that ! You only must copy the 1625 or lower straps to work well. Hello, sorry for spam but my englis is so bad i try find the bios to work with me card but i have fera to damage my card wrong bion pls can you post link for the good bios thank you so much thank you for you time waste for me i know im noob in my card bios i have last number 1:1500 and i must copry lower freqency 3 back ?? i have 1:1000, 1:1250, 1:1375, 1:1425, last 1:1500 right is to i copy from 1:1250 in to 1:1350 and 1:1375 and 1:1500 ?? this is all ?? and after pach the gpu ?? and when i open polaris bios edito this show me : unsuported device 0x67EF continue ? this is show me when i load original bios this is ok ?? tkan you for reply me
|
|
|
|
R0land
Jr. Member
Offline
Activity: 208
Merit: 3
|
|
January 25, 2018, 08:18:02 PM |
|
Hello,
ok i post original bios after to return home from work but you want to post all bios of my card but only one ??
i buy all card in one time and all have same pakage
thanks for you reply
sorry for my english
You should use GPU-Z to check if all of your cards have same memory (hynix, micron, elpida or samsung), thats all that matters...memory straps are different...only need 1 bios if all 6 cards have same memory type Hello, i watch witch gpuz all of my card have micron memory and there is my original bios http://www100.zippyshare.com/v/Ubo6i4Fq/file.htmlwith new driver i can take 13,1 with original bios with overclock and this is stable pls can mod my original bios to take more mh and one more qestion when i flash bios i do this with only one card in same time not more gpu in motherboard ? thx for help me 13,1 is a good hashrate for your card. I think you have the 6000MHz memory (1500x4), it only work up to 1950 . I can unlock the 16 shaders, but the bottle neck is the memory. The card will not hash faster.
|
|
|
|
Xmanek
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 25, 2018, 08:41:25 PM Last edit: January 25, 2018, 08:52:45 PM by Xmanek |
|
Hello,
ok i post original bios after to return home from work but you want to post all bios of my card but only one ??
i buy all card in one time and all have same pakage
thanks for you reply
sorry for my english
You should use GPU-Z to check if all of your cards have same memory (hynix, micron, elpida or samsung), thats all that matters...memory straps are different...only need 1 bios if all 6 cards have same memory type Hello, i watch witch gpuz all of my card have micron memory and there is my original bios http://www100.zippyshare.com/v/Ubo6i4Fq/file.htmlwith new driver i can take 13,1 with original bios with overclock and this is stable pls can mod my original bios to take more mh and one more qestion when i flash bios i do this with only one card in same time not more gpu in motherboard ? thx for help me 13,1 is a good hashrate for your card. I think you have the 6000MHz memory (1500x4), it only work up to 1950 . I can unlock the 16 shaders, but the bottle neck is the memory. The card will not hash faster. Hello, yes i have 6000Mhz memory i flash bios but in one card i use difrend bios they have memory set to 2200 after restar card dont work when is she in pc ther resrating again and again its gpu destroyed or i have litle chance to rescue this card i know i fuck this up :-( and another qestion if the card is death can i go back in the shop and use wariaty to repair card of get money back ?? can they recognize is in the card is flash bios ? thanky for you reply
|
|
|
|
R0land
Jr. Member
Offline
Activity: 208
Merit: 3
|
|
January 25, 2018, 09:04:32 PM |
|
Hello,
ok i post original bios after to return home from work but you want to post all bios of my card but only one ??
i buy all card in one time and all have same pakage
thanks for you reply
sorry for my english
You should use GPU-Z to check if all of your cards have same memory (hynix, micron, elpida or samsung), thats all that matters...memory straps are different...only need 1 bios if all 6 cards have same memory type Hello, i watch witch gpuz all of my card have micron memory and there is my original bios http://www100.zippyshare.com/v/Ubo6i4Fq/file.htmlwith new driver i can take 13,1 with original bios with overclock and this is stable pls can mod my original bios to take more mh and one more qestion when i flash bios i do this with only one card in same time not more gpu in motherboard ? thx for help me 13,1 is a good hashrate for your card. I think you have the 6000MHz memory (1500x4), it only work up to 1950 . I can unlock the 16 shaders, but the bottle neck is the memory. The card will not hash faster. Hello, yes i have 6000Mhz memory i flash bios but in one card i use difrend bios they have memory set to 2200 after restar card dont work when is she in pc ther resrating again and again its gpu destroyed or i have litle chance to rescue this card i know i fuck this up :-( and another qestion if the card is death can i go back in the shop and use wariaty to repair card of get money back ?? can they recognize is in the card is flash bios ? thanky for you reply Unplug the "destroyed" card. Uninstall drivers with ddu in windows safe Mode. Windows installs the standard driver. Plug in the "destroyed" card. Now you can flash the original VBIOS, if you are lucky.
|
|
|
|
Xmanek
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 25, 2018, 10:15:24 PM |
|
Hello,
ok i post original bios after to return home from work but you want to post all bios of my card but only one ??
i buy all card in one time and all have same pakage
thanks for you reply
sorry for my english
You should use GPU-Z to check if all of your cards have same memory (hynix, micron, elpida or samsung), thats all that matters...memory straps are different...only need 1 bios if all 6 cards have same memory type Hello, i watch witch gpuz all of my card have micron memory and there is my original bios http://www100.zippyshare.com/v/Ubo6i4Fq/file.htmlwith new driver i can take 13,1 with original bios with overclock and this is stable pls can mod my original bios to take more mh and one more qestion when i flash bios i do this with only one card in same time not more gpu in motherboard ? thx for help me 13,1 is a good hashrate for your card. I think you have the 6000MHz memory (1500x4), it only work up to 1950 . I can unlock the 16 shaders, but the bottle neck is the memory. The card will not hash faster. Hello, yes i have 6000Mhz memory i flash bios but in one card i use difrend bios they have memory set to 2200 after restar card dont work when is she in pc ther resrating again and again its gpu destroyed or i have litle chance to rescue this card i know i fuck this up :-( and another qestion if the card is death can i go back in the shop and use wariaty to repair card of get money back ?? can they recognize is in the card is flash bios ? thanky for you reply Unplug the "destroyed" card. Uninstall drivers with ddu in windows safe Mode. Windows installs the standard driver. Plug in the "destroyed" card. Now you can flash the original VBIOS, if you are lucky. Hi today is my lucky day card is back and mine stable 13,1 - 13,3 im sooo hapy Roland sooo much thank you you are relly expert you make my day thx
|
|
|
|
matof
Newbie
Offline
Activity: 3
Merit: 0
|
|
January 27, 2018, 07:21:39 AM |
|
Hi Roland, can you please edit /unlock my BIOS? Thank you
|
|
|
|
|