|
Elder III
|
 |
May 21, 2018, 12:08:54 AM |
|
anyone have the best lyra2z miner for 1080 ti ?, at best i only got 3.3 with ccminer 2.2.5
hmmm
I have the same question. Read that alexis is the best now, but it doesn`t work, or it needs more time to repair it. The djm34 version of ccminer is what we have used in the past. https://github.com/djm34/ccminer-msvc2015/releases/ It was always stable for us across a range of GTX 1000 series rigs. We got around 3.2 Mh/s on average on our GTX 1080 Ti GPUs the best could hit 3.3, but some would only do 3.15 etc... |
|
|
|
|
|
|
|
|
|
|
|
"If you don't want people to know you're a scumbag then don't be a scumbag." -- margaritahuyan
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
m.vina
|
|
May 21, 2018, 12:19:10 AM |
|
My problem with paying .05btc for his software is that at any time, another miner can come and be just as fast or faster. Then you're left with a .05btc miner you won't even use. Like others have said before, you'd make a lot more money on a fee for the miner rather than an up front charge. You really have a poor business plan if you think 2% of miners that pay .05btc is a better deal than 75% of all miners paying you 1-2% for your miner. incredibly poor business model.
If you will be more inspective - you can see on the screenshot that there is a "1% donation mining". I can wait to download it for free 2-3 weeks later. I'm not only talking about THIS particular miner, if you were more knowledgeable about SP and this topic you would know that his common theme is charging JUST a BTC .05 and not a fee on top of that. You'd also know after paying the .05 btc, a few weeks later a miner comes out that is faster than his and you're stuck with a slower miner you paid .05 btc for. And no, you won't be waiting for the free version a few weeks later because nobody is dumb enough to send you something for free when they paid $400 for it. Fk off with your snobby ass.. You forgot the part when he names what coin to mine with nice profits in his thread that is being visited by a lot of people and killing the profit on that coin for those who found it out all by them self only so he could sell his mod with 2% speed increase for 0,05 btc.Not the first time that he done this... I don't understand how 41 MH on PHI1612 is profitable though? Even whattomine indicates that it is still more profitable to be mining Lyra2rev based coins like VERGE. Where is this thread you speak of? sp_'s cc miner thread ( https://bitcointalk.org/index.php?topic=826901.24400) makes no indiciation of what coins to mine. |
|
|
|
nongkrong
Newbie
 Offline
Activity: 45
Merit: 0
|
|
May 21, 2018, 04:53:52 AM |
|
With 1080TI we try to max out with other algo.
If you are diehard ETH, dual mine with other altcoin is nice as this ti can do much more on dual mine vs others
The facts still remained the profitability has dropped since last two weeks. Have to face reality
But i am very curios how the other guy claim thry can do 500 dgb a day. Will be nice if he can share his trick
|
|
|
|
|
|
mak013
|
|
May 21, 2018, 11:23:56 AM |
|
anyone have the best lyra2z miner for 1080 ti ?, at best i only got 3.3 with ccminer 2.2.5
hmmm
I have the same question. Read that alexis is the best now, but it doesn`t work, or it needs more time to repair it. The djm34 version of ccminer is what we have used in the past. https://github.com/djm34/ccminer-msvc2015/releases/ It was always stable for us across a range of GTX 1000 series rigs. We got around 3.2 Mh/s on average on our GTX 1080 Ti GPUs the best could hit 3.3, but some would only do 3.15 etc... Thanks. It`s really better. It shows me about 3.2Mh too with Palit GameRock, and Gigabyte Aorus shows 3.25MH. It`s better then tpruvot version. |
|
|
|
Zosinburg
Newbie
Offline
Activity: 64
Merit: 0
|
|
May 21, 2018, 11:55:19 AM |
|
With 1080TI we try to max out with other algo.
If you are diehard ETH, dual mine with other altcoin is nice as this ti can do much more on dual mine vs others
The facts still remained the profitability has dropped since last two weeks. Have to face reality
But i am very curios how the other guy claim thry can do 500 dgb a day. Will be nice if he can share his trick
I use the 1080Ti mining ZEC at the moment. Do you think it is more profitable to mine other coins? |
|
|
|
|
jebidia
Jr. Member
Offline
Activity: 161
Merit: 1
|
|
May 21, 2018, 12:51:16 PM |
|
With 1080TI we try to max out with other algo.
If you are diehard ETH, dual mine with other altcoin is nice as this ti can do much more on dual mine vs others
The facts still remained the profitability has dropped since last two weeks. Have to face reality
But i am very curios how the other guy claim thry can do 500 dgb a day. Will be nice if he can share his trick
I use the 1080Ti mining ZEC at the moment. Do you think it is more profitable to mine other coins? I like ZEC too... Good long term potential imho |
|
|
|
|
RivAngE
Full Member
Offline
Activity: 728
Merit: 169
What doesn't kill you, makes you stronger
|
|
May 21, 2018, 01:14:36 PM |
|
With 1080TI we try to max out with other algo.
If you are diehard ETH, dual mine with other altcoin is nice as this ti can do much more on dual mine vs others
The facts still remained the profitability has dropped since last two weeks. Have to face reality
But i am very curios how the other guy claim thry can do 500 dgb a day. Will be nice if he can share his trick
I use the 1080Ti mining ZEC at the moment. Do you think it is more profitable to mine other coins? It won't make big difference. It'd would also depend on how much of another coin you'd accumulate before trading it. If you instately exchange small quanities into ZEC, you lose a lot in fees and you might end up getting less ZEC compared to the amount you'd get by mining it directly. On the other hand if you keep mining another coin until you accumulate a big amount and then trade it, you risk big changes in the prices... either ZEC going up and you'll be able to buy less, or the coin you mine going down. Ofcourse in this case the whatever-coin you mine could go high faster than ZEC and you get a good deal out of it, but that's a 50-50 luck based. If you have a big rig and you can accumulate shitcoins fast and sell them in big amounts, then do that. Otherwise stick to mining ZEC. |
|
|
|
|
|
mak013
|
|
May 22, 2018, 06:33:36 AM |
|
With 1080TI we try to max out with other algo.
If you are diehard ETH, dual mine with other altcoin is nice as this ti can do much more on dual mine vs others
The facts still remained the profitability has dropped since last two weeks. Have to face reality
But i am very curios how the other guy claim thry can do 500 dgb a day. Will be nice if he can share his trick
I use the 1080Ti mining ZEC at the moment. Do you think it is more profitable to mine other coins? I like ZEC too... Good long term potential imho It gives at less 20-25% under then shitcoins. Of course, if you don`t want to spend your time at boards - you can mine ZEC or ETH, but you laziness steals your money. |
|
|
|
|
Dr_Victor
|
|
May 22, 2018, 06:38:38 PM |
|
anyone have the best lyra2z miner for 1080 ti ?, at best i only got 3.3 with ccminer 2.2.5
hmmm
I have the same question. Read that alexis is the best now, but it doesn`t work, or it needs more time to repair it. Please, don't stop looking for the best lyra2z miner. I have 4.6 on gtx 1080 ti with free product. |
yobit.net is banned from signatures
|
|
|
leojoyms
Newbie
Offline
Activity: 54
Merit: 0
|
|
May 22, 2018, 06:42:37 PM |
|
anyone have the best lyra2z miner for 1080 ti ?, at best i only got 3.3 with ccminer 2.2.5
hmmm
I have the same question. Read that alexis is the best now, but it doesn`t work, or it needs more time to repair it. Please, don't stop looking for the best lyra2z miner. I have 4.6 on gtx 1080 ti with free product. 4.6? What miner are you using? |
|
|
|
|
|
Boriss
|
|
May 22, 2018, 07:12:18 PM |
|
If I remember correctly, MPH is recommending DJM34 miner for a reason. Also keep in mind that even Tpruvot has original implemented Djm34 in his ccminer for Lyra2z. Don't know if someone has additionally optimised his code from that time till now...I cannot find any release statements regarding Lyra2z from that time till current date in any new release.  |
|
|
|
|
Mohondoa
Newbie
Offline
Activity: 154
Merit: 0
|
|
May 23, 2018, 04:41:57 AM |
|
I will be buying a bunch of 1080 Ti's and I love do it at between zpool and miningpoolhub as well. It seems like zpool has more algo's/coins but has higher fees and the owner have nice source code. Miningpoolhub has less algo's/coins but has lower fees and the owner have nice source code too.
|
|
|
|
|
|
95do
|
|
May 23, 2018, 05:32:43 AM |
|
what is the equihash hashrate on the evga 1080 ti SC? On the Evga 1080 ti gaming ftw3 it is 720.
Not all cards hash the same so was looking to pick up some evga SC cards but not if they are hashing lower than 700
|
|
|
|
|
ShowMeCoins
Member
Offline
Activity: 129
Merit: 11
|
|
May 23, 2018, 06:16:23 AM |
|
what is the equihash hashrate on the evga 1080 ti SC? On the Evga 1080 ti gaming ftw3 it is 720.
Not all cards hash the same so was looking to pick up some evga SC cards but not if they are hashing lower than 700
I have 2 FTW3 and 4 SC "Black Edition" cards in one RIG. Using DTSM 0.6.1 (250Watt, Clock +85, Mem +850) I get: > GPU0 56C 95% | 757.4 Sol/s 767.7 Avg 409.0 I/s | 3.08 S/W 253 W | 5.24 100 38 ++
> GPU1 58C 95% | 771.1 Sol/s 768.2 Avg 411.0 I/s | 3.09 S/W 245 W | 2.99 100 30
> GPU2 53C 95% | 778.9 Sol/s 782.7 Avg 416.2 I/s | 3.16 S/W 245 W | 4.52 100 26 +
> GPU3 55C 95% | 777.4 Sol/s 780.0 Avg 416.0 I/s | 3.17 S/W 254 W | 0.75 100 41 +
> GPU4 60C 95% | 771.0 Sol/s 780.2 Avg 414.4 I/s | 3.13 S/W 255 W | 6.77 100 39
> GPU5 56C 95% | 780.7 Sol/s 777.1 Avg 413.4 I/s | 3.14 S/W 251 W | 2.57 100 40
|
|
|
|
|
|
mak013
|
|
May 23, 2018, 08:45:23 AM |
|
anyone have the best lyra2z miner for 1080 ti ?, at best i only got 3.3 with ccminer 2.2.5
hmmm
I have the same question. Read that alexis is the best now, but it doesn`t work, or it needs more time to repair it. Please, don't stop looking for the best lyra2z miner. I have 4.6 on gtx 1080 ti with free product. Can you PM it? I`ve got 3.2MH max only and I think, I tried most of free miners and haven`t get smth near 4MH ever. |
|
|
|
|
95do
|
|
May 23, 2018, 01:34:16 PM |
|
what is the equihash hashrate on the evga 1080 ti SC? On the Evga 1080 ti gaming ftw3 it is 720.
Not all cards hash the same so was looking to pick up some evga SC cards but not if they are hashing lower than 700
I have 2 FTW3 and 4 SC "Black Edition" cards in one RIG. Using DTSM 0.6.1 (250Watt, Clock +85, Mem +850) I get: > GPU0 56C 95% | 757.4 Sol/s 767.7 Avg 409.0 I/s | 3.08 S/W 253 W | 5.24 100 38 ++
> GPU1 58C 95% | 771.1 Sol/s 768.2 Avg 411.0 I/s | 3.09 S/W 245 W | 2.99 100 30
> GPU2 53C 95% | 778.9 Sol/s 782.7 Avg 416.2 I/s | 3.16 S/W 245 W | 4.52 100 26 +
> GPU3 55C 95% | 777.4 Sol/s 780.0 Avg 416.0 I/s | 3.17 S/W 254 W | 0.75 100 41 +
> GPU4 60C 95% | 771.0 Sol/s 780.2 Avg 414.4 I/s | 3.13 S/W 255 W | 6.77 100 39
> GPU5 56C 95% | 780.7 Sol/s 777.1 Avg 413.4 I/s | 3.14 S/W 251 W | 2.57 100 40
You are the best thank you  |
|
|
|
|
shubham412302
Newbie
Offline
Activity: 16
Merit: 0
|
|
May 23, 2018, 01:39:34 PM |
|
anyone have the best lyra2z miner for 1080 ti ?, at best i only got 3.3 with ccminer 2.2.5
hmmm
TPruvotx64@3.52mh/s one included in nemos miner 2.5.1 and zfastminer one gives 4.1mh/s |
|
|
|
|
|
Dr_Victor
|
|
May 23, 2018, 05:15:01 PM |
|
|
yobit.net is banned from signatures
|
|
|
ironkid
Newbie
Offline
Activity: 59
Merit: 0
|
|
May 23, 2018, 05:23:06 PM |
|
Zfastminer is nice but lately I dont like the profits on Mining pool hub and it only works on that pool.
|
|
|
|
|
pablogv
Newbie
Offline
Activity: 18
Merit: 0
|
|
May 23, 2018, 06:44:54 PM |
|
what is the equihash hashrate on the evga 1080 ti SC? On the Evga 1080 ti gaming ftw3 it is 720.
Not all cards hash the same so was looking to pick up some evga SC cards but not if they are hashing lower than 700
I have 2 FTW3 and 4 SC "Black Edition" cards in one RIG. Using DTSM 0.6.1 (250Watt, Clock +85, Mem +850) I get: > GPU0 56C 95% | 757.4 Sol/s 767.7 Avg 409.0 I/s | 3.08 S/W 253 W | 5.24 100 38 ++
> GPU1 58C 95% | 771.1 Sol/s 768.2 Avg 411.0 I/s | 3.09 S/W 245 W | 2.99 100 30
> GPU2 53C 95% | 778.9 Sol/s 782.7 Avg 416.2 I/s | 3.16 S/W 245 W | 4.52 100 26 +
> GPU3 55C 95% | 777.4 Sol/s 780.0 Avg 416.0 I/s | 3.17 S/W 254 W | 0.75 100 41 +
> GPU4 60C 95% | 771.0 Sol/s 780.2 Avg 414.4 I/s | 3.13 S/W 255 W | 6.77 100 39
> GPU5 56C 95% | 780.7 Sol/s 777.1 Avg 413.4 I/s | 3.14 S/W 251 W | 2.57 100 40
Can I ask you what drivers/overclocker are you using mate? got a rig with 2 FTW3 and 4 SC Black and I can't get them past +70 on core/+300 on memory, they get crazy. And btw got them at your same temps :| |
|
|
|
|
|
