OverEasy
|
|
July 28, 2017, 01:12:19 PM Last edit: July 28, 2017, 01:37:17 PM by OverEasy |
|
@Fullzero -
Can you give some instructions on installing all the flavors of ccminer on the RXoc build? I tired it myself but got errors when running "make" about cuda. Kind of a linux noob here, but I wanna try mining some of the new SIGT coin.
Thank you
ccminer is for Nvidia GPUs only. Ok thanks...I think this will do it https://github.com/tpruvot/sgminerTesting... Nope failed on make again. I just don't understand enough linux to install this stuff. sudo apt-get install libcurl4-openssl-dev pkg-config libtool libncurses5-dev sudo git clone https://github.com/tpruvot/sgminer.gitcd sgminer sudo ./autogen.sh sudo ./configure sudo make m1@m1-desktop:~/sgminer$ sudo make make all-recursive make[1]: Entering directory '/home/m1/sgminer' Making all in lib make[2]: Entering directory '/home/m1/sgminer/lib' make all-recursive make[3]: Entering directory '/home/m1/sgminer/lib' make[4]: Entering directory '/home/m1/sgminer/lib' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/home/m1/sgminer/lib' make[3]: Leaving directory '/home/m1/sgminer/lib' make[2]: Leaving directory '/home/m1/sgminer/lib' Making all in submodules make[2]: Entering directory '/home/m1/sgminer/submodules' Making all in jansson make[3]: Entering directory '/home/m1/sgminer/submodules/jansson' make[3]: *** No rule to make target 'all'. Stop. make[3]: Leaving directory '/home/m1/sgminer/submodules/jansson' Makefile:514: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '/home/m1/sgminer/submodules' Makefile:1790: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/m1/sgminer' Makefile:664: recipe for target 'all' failed make: *** [all] Error 2 Any help would be appreciated. Thanks
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
July 28, 2017, 01:47:20 PM |
|
@Fullzero -
Can you give some instructions on installing all the flavors of ccminer on the RXoc build? I tired it myself but got errors when running "make" about cuda. Kind of a linux noob here, but I wanna try mining some of the new SIGT coin.
Thank you
ccminer is for Nvidia GPUs only. Ok thanks...I think this will do it https://github.com/tpruvot/sgminerTesting... Nope failed on make again. I just don't understand enough linux to install this stuff. sudo apt-get install libcurl4-openssl-dev pkg-config libtool libncurses5-dev sudo git clone https://github.com/tpruvot/sgminer.gitcd sgminer sudo ./autogen.sh sudo ./configure sudo make m1@m1-desktop:~/sgminer$ sudo make make all-recursive make[1]: Entering directory '/home/m1/sgminer' Making all in lib make[2]: Entering directory '/home/m1/sgminer/lib' make all-recursive make[3]: Entering directory '/home/m1/sgminer/lib' make[4]: Entering directory '/home/m1/sgminer/lib' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/home/m1/sgminer/lib' make[3]: Leaving directory '/home/m1/sgminer/lib' make[2]: Leaving directory '/home/m1/sgminer/lib' Making all in submodules make[2]: Entering directory '/home/m1/sgminer/submodules' Making all in jansson make[3]: Entering directory '/home/m1/sgminer/submodules/jansson' make[3]: *** No rule to make target 'all'. Stop. make[3]: Leaving directory '/home/m1/sgminer/submodules/jansson' Makefile:514: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '/home/m1/sgminer/submodules' Makefile:1790: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/m1/sgminer' Makefile:664: recipe for target 'all' failed make: *** [all] Error 2 Any help would be appreciated. Thanks Guessing based on your errors: clone or download: https://github.com/akheron/jansson.git and place the contents in the '/home/m1/sgminer/submodules/jansson' directory and try again
|
|
|
|
OverEasy
|
|
July 28, 2017, 03:46:24 PM |
|
@Fullzero -
Can you give some instructions on installing all the flavors of ccminer on the RXoc build? I tired it myself but got errors when running "make" about cuda. Kind of a linux noob here, but I wanna try mining some of the new SIGT coin.
Thank you
ccminer is for Nvidia GPUs only. Ok thanks...I think this will do it https://github.com/tpruvot/sgminerTesting... Nope failed on make again. I just don't understand enough linux to install this stuff. sudo apt-get install libcurl4-openssl-dev pkg-config libtool libncurses5-dev sudo git clone https://github.com/tpruvot/sgminer.gitcd sgminer sudo ./autogen.sh sudo ./configure sudo make m1@m1-desktop:~/sgminer$ sudo make make all-recursive make[1]: Entering directory '/home/m1/sgminer' Making all in lib make[2]: Entering directory '/home/m1/sgminer/lib' make all-recursive make[3]: Entering directory '/home/m1/sgminer/lib' make[4]: Entering directory '/home/m1/sgminer/lib' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/home/m1/sgminer/lib' make[3]: Leaving directory '/home/m1/sgminer/lib' make[2]: Leaving directory '/home/m1/sgminer/lib' Making all in submodules make[2]: Entering directory '/home/m1/sgminer/submodules' Making all in jansson make[3]: Entering directory '/home/m1/sgminer/submodules/jansson' make[3]: *** No rule to make target 'all'. Stop. make[3]: Leaving directory '/home/m1/sgminer/submodules/jansson' Makefile:514: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '/home/m1/sgminer/submodules' Makefile:1790: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/m1/sgminer' Makefile:664: recipe for target 'all' failed make: *** [all] Error 2 Any help would be appreciated. Thanks Guessing based on your errors: clone or download: https://github.com/akheron/jansson.git and place the contents in the '/home/m1/sgminer/submodules/jansson' directory and try again Figured it out. For anyone at home playing along here it is - First blow away any sgminer folder you have A: sudo rm -rf sgminer B: Go get the new sgminer with skunk - sudo git clone https://github.com/tpruvot/sgminer.gitC: Jump in the sgminer folder - cd sgminer D: sudo git submodule init E: sudo git submodule update F: sudo autoreconf -i G: sudo CFLAGS="-O2 -Wall -march=native" ./configure H: sudo make Now go set up 1bash for SIGT and go get some
|
|
|
|
OverEasy
|
|
July 28, 2017, 04:43:45 PM |
|
Mining some SIGT on rxOC with 3 AMD R9 390's Now to do some calcs on whattomine and see if this is even profitable lol...if so take all the other rigs over
|
|
|
|
OverEasy
|
|
July 29, 2017, 03:50:25 PM |
|
If anyone is interested here is my MiningPoolHub setup for rxOC - MPH auto adds your workers so you don't even have to go and set them up first... # MPH (MININGPOOLHUB) COIN="MPH" MPH_WORKER="$IP_AS_WORKER" MPH_ADDRESS="WhatEver" MPH_POOL="us-east.ethash-hub.miningpoolhub.com:12020" (This is the auto-switching port) if [ $COIN == "MPH" ] then HCD='/home/m1/eth/Genoil/ethminer' ADDR="$MPH_ADDRESS.$MPH_WORKER" $HCD -S $MPH_POOL -O $ADDR:x -G fi You can edit this last part if you want Claymore.... If your using Nvidia and nvOC make sure to see Scott Alfter's awesomeness at https://gitlab.com/salfter/mph_switch
|
|
|
|
IVB
Newbie
Offline
Activity: 2
Merit: 0
|
|
August 02, 2017, 04:06:49 PM |
|
Hi.
Have two questions.
1. How I can boot without onebash? In pure linux.
2. Are any debugging mechanisms exist? After 1st boot have clean black screen - need to determine reason.
This is 1st time loading rxOC...
|
|
|
|
mraug
Newbie
Offline
Activity: 25
Merit: 0
|
|
August 05, 2017, 12:23:08 AM |
|
I tried again a MSI Z270 gamining PLUS, only one gpu connected to the monitor, disabled avobe 4g memory, and it worked. If I enable 4g, the screen gets like this http://imgur.com/a/w8sSc . Dont even reach grub. I tried in UEFI and Legacy, and PCI gen 1 and 2. Have you tried updating the bios on this motherboard? Hi, Got the same problem here. I'm using MSI Z270-A PRO, when I enable above 4g memory in BIOS, I get that broken screen as in the link posted by Zucca. All my GPUs are Saphire RX 580. Interesting enough, I used the same board with nvOC and 6x1080ti and did not have the problem. I'm using the latest BIOS. Also another problem only in rxOC is that the Ubuntu doesn't recognize the network adapter on the mainboard. Worked fine on nvOC, only broken on rx0C. Any ideas?
|
|
|
|
Zucca
Newbie
Offline
Activity: 80
Merit: 0
|
|
August 08, 2017, 05:26:03 PM |
|
I tried again a MSI Z270 gamining PLUS, only one gpu connected to the monitor, disabled avobe 4g memory, and it worked. If I enable 4g, the screen gets like this http://imgur.com/a/w8sSc . Dont even reach grub. I tried in UEFI and Legacy, and PCI gen 1 and 2. Have you tried updating the bios on this motherboard? Hi, Got the same problem here. I'm using MSI Z270-A PRO, when I enable above 4g memory in BIOS, I get that broken screen as in the link posted by Zucca. All my GPUs are Saphire RX 580. Interesting enough, I used the same board with nvOC and 6x1080ti and did not have the problem. I'm using the latest BIOS. Also another problem only in rxOC is that the Ubuntu doesn't recognize the network adapter on the mainboard. Worked fine on nvOC, only broken on rx0C. Any ideas? Hello, The causes can be many, it is really hard to tell, I wasnt able solve the problem with this OS so I moved to Windows. From the experience I have, a main diferrence between Windows and Linux is the driver, when linux amd driver cannot load a GPU, it fails and stops booting, Windows, in contrast, boots anyway and it hits you with a error message in the device manager o simply doesnt recognize the card. I know that the main cause of blank screen when enabling 4G, is due to the amd driver not working properly. What I think it could happened to me, some risers worked unstably and caused driver failures. When you try to solve mining related issues, you have to make sure that the risers are working, otherwise you will get some errors that will be problematic to identify. Probably nvidia drivers work different to amd. @Edit: This guide should help you, https://drive.google.com/file/d/0B-Z98LONNR0hTGM0Y0ViR0VXS2c/view
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 09, 2017, 06:12:09 AM |
|
@Fullzero -
Can you give some instructions on installing all the flavors of ccminer on the RXoc build? I tired it myself but got errors when running "make" about cuda. Kind of a linux noob here, but I wanna try mining some of the new SIGT coin.
Thank you
ccminer is for Nvidia GPUs only. Ok thanks...I think this will do it https://github.com/tpruvot/sgminerTesting... Nope failed on make again. I just don't understand enough linux to install this stuff. sudo apt-get install libcurl4-openssl-dev pkg-config libtool libncurses5-dev sudo git clone https://github.com/tpruvot/sgminer.gitcd sgminer sudo ./autogen.sh sudo ./configure sudo make m1@m1-desktop:~/sgminer$ sudo make make all-recursive make[1]: Entering directory '/home/m1/sgminer' Making all in lib make[2]: Entering directory '/home/m1/sgminer/lib' make all-recursive make[3]: Entering directory '/home/m1/sgminer/lib' make[4]: Entering directory '/home/m1/sgminer/lib' make[4]: Nothing to be done for 'all-am'. make[4]: Leaving directory '/home/m1/sgminer/lib' make[3]: Leaving directory '/home/m1/sgminer/lib' make[2]: Leaving directory '/home/m1/sgminer/lib' Making all in submodules make[2]: Entering directory '/home/m1/sgminer/submodules' Making all in jansson make[3]: Entering directory '/home/m1/sgminer/submodules/jansson' make[3]: *** No rule to make target 'all'. Stop. make[3]: Leaving directory '/home/m1/sgminer/submodules/jansson' Makefile:514: recipe for target 'all-recursive' failed make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory '/home/m1/sgminer/submodules' Makefile:1790: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/m1/sgminer' Makefile:664: recipe for target 'all' failed make: *** [all] Error 2 Any help would be appreciated. Thanks Guessing based on your errors: clone or download: https://github.com/akheron/jansson.git and place the contents in the '/home/m1/sgminer/submodules/jansson' directory and try again Figured it out. For anyone at home playing along here it is - First blow away any sgminer folder you have A: sudo rm -rf sgminer B: Go get the new sgminer with skunk - sudo git clone https://github.com/tpruvot/sgminer.gitC: Jump in the sgminer folder - cd sgminer D: sudo git submodule init E: sudo git submodule update F: sudo autoreconf -i G: sudo CFLAGS="-O2 -Wall -march=native" ./configure H: sudo make Now go set up 1bash for SIGT and go get some Thanks for making a guide; saves time everytime.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 09, 2017, 06:18:27 AM |
|
Hi.
Have two questions.
1. How I can boot without onebash? In pure linux.
2. Are any debugging mechanisms exist? After 1st boot have clean black screen - need to determine reason.
This is 1st time loading rxOC...
go to the top left and type then click on startup applications unselect boot or mining (I don't remember what I named it off the top of my head) you can also open 2unix and comment out the line: by adding a # to the front of it. Ensure you have the monitor connected to the primary 16x slot closest to the CPU.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 09, 2017, 06:19:34 AM |
|
I tried again a MSI Z270 gamining PLUS, only one gpu connected to the monitor, disabled avobe 4g memory, and it worked. If I enable 4g, the screen gets like this http://imgur.com/a/w8sSc . Dont even reach grub. I tried in UEFI and Legacy, and PCI gen 1 and 2. Have you tried updating the bios on this motherboard? Hi, Got the same problem here. I'm using MSI Z270-A PRO, when I enable above 4g memory in BIOS, I get that broken screen as in the link posted by Zucca. All my GPUs are Saphire RX 580. Interesting enough, I used the same board with nvOC and 6x1080ti and did not have the problem. I'm using the latest BIOS. Also another problem only in rxOC is that the Ubuntu doesn't recognize the network adapter on the mainboard. Worked fine on nvOC, only broken on rx0C. Any ideas? try running updates: Click Ubuntu button on top left and type: u Click on software updater Install updates Reboot
|
|
|
|
IVB
Newbie
Offline
Activity: 2
Merit: 0
|
|
August 11, 2017, 07:13:43 AM |
|
Hi, fullzero.
First of all - thanks for your work.
You are using 17.10 AMD driver in your build. But latest AMD driver for RX series is 17.30. Does it make sense to use latest version of driver?
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 11, 2017, 05:53:23 PM |
|
Hi, fullzero.
First of all - thanks for your work.
You are using 17.10 AMD driver in your build. But latest AMD driver for RX series is 17.30. Does it make sense to use latest version of driver?
I will test the newer driver and use it for the next version if it is better.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 11, 2017, 05:55:19 PM |
|
Hello anyone can help me im stuck on log in when i try to enter the password screen just blink and back to log in Have you connected the monitor to the integrated graphics on the mobo? Do you have an nvidia GPU on your rig? What components are you using.
|
|
|
|
juliusC
Newbie
Offline
Activity: 1
Merit: 0
|
|
August 12, 2017, 05:45:33 PM Last edit: August 13, 2017, 07:19:09 AM by juliusC |
|
Thank you fullzero for your awesome work. Having configured the BIOS according to the guide and added "pci=noaer" as well as "pcie_aspm=off" to the grub boot parameter, I can successfully boot the machine. Currently I face a few problem with my 12 R9 390X rig. First, it boots into low graphics mode, which isn't too bad as there is still a terminal for me to run oneBash. However oneBash always hangs here. http://imgur.com/thIws8bI tried running Genoil and Claymore in ~/eth/Genoil and ~/eth/9_5 respectively and both ran into the "GPU fault detected:147" just after a few seconds of mining. http://imgur.com/E36sdzeDividing the GPUs into separated Claymore sessions helps but I have never been successful in running all the 12 GPUs. While ubuntu recognises all 12 GPU judging from lspci output, if more than 8 GPU is mining the error "GPU fault detected:147" will appear. Any hint on how to solve these problems? Hardware: Biostar TB-250 Pro Ver.6, Intel Celeron G3930, 4GB Ram, 3x 1200W Server PSU, 12x R9 390X.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 13, 2017, 03:37:10 PM |
|
Hello anyone can help me im stuck on log in when i try to enter the password screen just blink and back to log in Have you connected the monitor to the integrated graphics on the mobo? Do you have an nvidia GPU on your rig? What components are you using. Thank you FullZero Yes i use plug in my monitor on mother board ...im using Biostar TB250 BTC pro, pentium G4650,16gig memory sticks,usb 3.0 sandisk 32 gig 6 rx570 and 6 470 all 4 gig,,(for test i only plug 1 gpu) no nvidia card mix on mobo bios is updated,bios setting is configure as on the instruction Attach your monitor to the primary GPU; the one connected to the 16x slot closest to the CPU. rxOC and nvOC don't support using integrated graphics. This is most likely the problem.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 13, 2017, 03:43:48 PM |
|
Thank you fullzero for your awesome work. Having configured the BIOS according to the guide and added "pci=noaer" as well as "pcie_aspm=off" to the grub boot parameter, I can successfully boot the machine. Currently I face a few problem with my 12 R9 390X rig. First, it boots into low graphics mode, which isn't too bad as there is still a terminal for me to run oneBash. However oneBash always hangs here. I tried running Genoil and Claymore in ~/eth/Genoil and ~/eth/9_5 respectively and both ran into the "GPU fault detected:147" just after a few seconds of mining. Dividing the GPUs into separated Claymore sessions helps but I have never been successful in running all the 12 GPUs. While ubuntu recognises all 12 GPU judging from lspci output, if more than 8 GPU is mining the error "GPU fault detected:147" will appear. Any hint on how to solve these problems? Hardware: Biostar TB-250 Pro Ver.6, Intel Celeron G3930, 4GB Ram, 3x 1200W Server PSU, 12x R9 390X. 10% overdrive is probably too much for one, some, or all of your GPUs. I would try setting overdrive to 0 to see if it is the problem.
|
|
|
|
baddesign
Newbie
Offline
Activity: 4
Merit: 0
|
|
August 22, 2017, 05:36:04 AM |
|
Hi fullzero and all.
Really...REALLY like the NvOC OS for my nVidia cards - using v17 without any hiccups for over a month now.
However, trying to spin up a 12-rig tb250-btc pro rig at the moment using rxOC v0012 and finding that I'm completely incapable of lowering the power consumption of the GPUs.
How can I verify that the MEMORY_OVERCLOCK_LEVEL and __CORE_OVERCLOCK_LEVEL parameters are actually doing what they're supposed to? The rocm-smi utility shows that the lower levels aren't being utilized properly...I'm either at the lowest level or highest, depending on the PERFORMANCE_LEVEL variable alone. So...sadly, it seems I can't get a middle ground.
No issues with these same cards (mix of RX580 Nitro+ and Pulse) within Windows.
Did some digging around with other mining OS and found that two of the big ones use wolfamdctrl to modify core-state and mem-state as well, but I haven't had any luck with that utility, either. The only values I seem to be able to change between rocm-smi and wolfamdctrl are the Fan speeds, memclock/core-clock, and overall Performance Level. Also, modifying the pp_tables directly by using 'echo manual > /sys/class/drm/card*/device/power_dpm_force_performance_level" and similar shows that nothing sticks.
All the work is being done under root - so I know it's not permission. It's almost as if something is overwriting every change I'm making, although nothing is jumping out at me...
Any ideas?
Here's an easy to see example of what I'm talking about: root@bad:/home/m1# echo "manual" > /sys/class/drm/card0/device/power_dpm_force_performance_level root@bad:/home/m1# more /sys/class/drm/card0/device/power_dpm_force_performance_level auto
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 23, 2017, 04:48:33 AM |
|
Hi fullzero and all.
Really...REALLY like the NvOC OS for my nVidia cards - using v17 without any hiccups for over a month now.
However, trying to spin up a 12-rig tb250-btc pro rig at the moment using rxOC v0012 and finding that I'm completely incapable of lowering the power consumption of the GPUs.
How can I verify that the MEMORY_OVERCLOCK_LEVEL and __CORE_OVERCLOCK_LEVEL parameters are actually doing what they're supposed to? The rocm-smi utility shows that the lower levels aren't being utilized properly...I'm either at the lowest level or highest, depending on the PERFORMANCE_LEVEL variable alone. So...sadly, it seems I can't get a middle ground.
No issues with these same cards (mix of RX580 Nitro+ and Pulse) within Windows.
Did some digging around with other mining OS and found that two of the big ones use wolfamdctrl to modify core-state and mem-state as well, but I haven't had any luck with that utility, either. The only values I seem to be able to change between rocm-smi and wolfamdctrl are the Fan speeds, memclock/core-clock, and overall Performance Level. Also, modifying the pp_tables directly by using 'echo manual > /sys/class/drm/card*/device/power_dpm_force_performance_level" and similar shows that nothing sticks.
All the work is being done under root - so I know it's not permission. It's almost as if something is overwriting every change I'm making, although nothing is jumping out at me...
Any ideas?
Here's an easy to see example of what I'm talking about: root@bad:/home/m1# echo "manual" > /sys/class/drm/card0/device/power_dpm_force_performance_level root@bad:/home/m1# more /sys/class/drm/card0/device/power_dpm_force_performance_level auto
I still need to mess around with the direct amd api commands. In my experience so far; the current amd api is absolute rubbish for the exact reason you are describing above. AMD has announced they are making a new mining driver and api, hopefully it is as good as nvidia's. I will look into making the current amd api OC better (it has to be possible as it can be done by the windows OC applications) probably after I finish nvOC v0019 and translate as many of the v0019 features to rxOC as possible.
|
|
|
|
baddesign
Newbie
Offline
Activity: 4
Merit: 0
|
|
August 23, 2017, 06:39:19 AM |
|
I still need to mess around with the direct amd api commands. In my experience so far; the current amd api is absolute rubbish for the exact reason you are describing above. AMD has announced they are making a new mining driver and api, hopefully it is as good as nvidia's. I will look into making the current amd api OC better (it has to be possible as it can be done by the windows OC applications) probably after I finish nvOC v0019 and translate as many of the v0019 features to rxOC as possible.
Thank you for the quick response and sanity-check. I've had to abandon my late night trouble-shooting due to other affairs, but I'll be back to continue in a few weeks. In case you're curious, I left off attempting a clean Ubuntu desktop install (kernel 4.10.5) with AMDGPU-Pro 16.60 drivers. Also found it surprising that wolfamdctrl binary was so difficult to obtain - however, managed to pluck v1.2 from a "simple" OS as was trying that next as well... Anyway - appreciate all your efforts into this distro. I'll certainly let you know if I come across anything substantial before you figure it out yourself.
|
|
|
|
|