tgacomp
Newbie
Offline
Activity: 5
Merit: 0
|
|
August 28, 2017, 08:55:09 PM |
|
Can you set individual OC for different cards?
|
|
|
|
Bigf00t
Newbie
Offline
Activity: 60
Merit: 0
|
|
August 29, 2017, 11:11:50 AM |
|
Is it possible to set a resolution for Teamviewer, when there is no monitor connected to the rig? Because now I get a very low resolution. I already looked here: https://wiki.ubuntu.com/X/Config/Resolution, but I am still a Linux beginner. What do I have to do when I want to set the resolution to 1280 x 1024 for example?
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 31, 2017, 03:45:15 AM |
|
Is it possible to set a resolution for Teamviewer, when there is no monitor connected to the rig? Because now I get a very low resolution. I already looked here: https://wiki.ubuntu.com/X/Config/Resolution, but I am still a Linux beginner. What do I have to do when I want to set the resolution to 1280 x 1024 for example? To have a high resolution team viewer either; leaver a monitor connected to the primary GPU or attach a dummy plug to the primary GPU.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
August 31, 2017, 03:46:24 AM |
|
Can you set individual OC for different cards?
Currently no; rxOC does not support individual OC: mostly because the AMD API is shite. I am now working on a new rxOC version.
|
|
|
|
stef_stef
|
|
August 31, 2017, 05:44:03 PM |
|
Any plans to implement the blockchain driver from AMD?
|
|
|
|
tgacomp
Newbie
Offline
Activity: 5
Merit: 0
|
|
September 01, 2017, 07:19:08 AM |
|
Can you set individual OC for different cards?
Currently no; rxOC does not support individual OC: mostly because the AMD API is shite. I am now working on a new rxOC version. Thanks for your reply. Is the overclocking in the rxOC oneBash file a level i.e. 1-10 rather than MHz as in the nvOC?
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
September 01, 2017, 03:23:04 PM |
|
Any plans to implement the blockchain driver from AMD?
Yes, I will use this driver for the next version.
|
|
|
|
stef_stef
|
|
September 01, 2017, 03:24:30 PM |
|
Any plans to implement the blockchain driver from AMD?
Yes, I will use this driver for the next version. Any estimates on when the next version is coming out?
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
September 01, 2017, 03:28:13 PM |
|
Can you set individual OC for different cards?
Currently no; rxOC does not support individual OC: mostly because the AMD API is shite. I am now working on a new rxOC version. Thanks for your reply. Is the overclocking in the rxOC oneBash file a level i.e. 1-10 rather than MHz as in the nvOC? It is technically in percent: OVERDRIVE_PERCENT Although it is further complicated by the clocks having distinct ( levels ) which are essentially static clock speeds which can be selected. Why AMD didn't use a standard offset as Nvidia does and previous AMD drivers did; I have no idea. AMD has announced they are making a new mining optimized driver and api; at this point I would only make an AMD rig if someone offered to sell me GPUs at significantly discounted rates.
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
September 01, 2017, 03:32:36 PM |
|
Any plans to implement the blockchain driver from AMD?
Yes, I will use this driver for the next version. Any estimates on when the next version is coming out? This is the next thing to do on my list after building out some hardware. I will start working on it in earnest this weekend; although I am not sure when it will be done.
|
|
|
|
tgacomp
Newbie
Offline
Activity: 5
Merit: 0
|
|
September 02, 2017, 05:29:22 AM |
|
I tried running rxoc but I get a scrolling error, its hard to read but looks like error PCIe
Running an ASUS Prime H270-Plus, 8Gb RAM 4x RX470/ RX570. Have tried flashing the BIOS, enabling Above 4Gb decoding and setting PCIe to Gen 2. Anything else I can try?
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
September 02, 2017, 05:52:49 PM |
|
I tried running rxoc but I get a scrolling error, its hard to read but looks like error PCIe
Running an ASUS Prime H270-Plus, 8Gb RAM 4x RX470/ RX570. Have tried flashing the BIOS, enabling Above 4Gb decoding and setting PCIe to Gen 2. Anything else I can try?
If you try booting with a single gpu direct in the primary pcie slot; does the OS boot properly?
|
|
|
|
tgacomp
Newbie
Offline
Activity: 5
Merit: 0
|
|
September 04, 2017, 03:58:45 AM |
|
I tried running rxoc but I get a scrolling error, its hard to read but looks like error PCIe
Running an ASUS Prime H270-Plus, 8Gb RAM 4x RX470/ RX570. Have tried flashing the BIOS, enabling Above 4Gb decoding and setting PCIe to Gen 2. Anything else I can try?
If you try booting with a single gpu direct in the primary pcie slot; does the OS boot properly? Yes it worked with one card. I am wondering if it doesn't like the mix of different cards rx470 / 570s
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
September 05, 2017, 04:38:51 PM |
|
I tried running rxoc but I get a scrolling error, its hard to read but looks like error PCIe
Running an ASUS Prime H270-Plus, 8Gb RAM 4x RX470/ RX570. Have tried flashing the BIOS, enabling Above 4Gb decoding and setting PCIe to Gen 2. Anything else I can try?
If you try booting with a single gpu direct in the primary pcie slot; does the OS boot properly? Yes it worked with one card. I am wondering if it doesn't like the mix of different cards rx470 / 570s Maybe; I would try with the 4x 470s and see if it still works.
|
|
|
|
kusuma
Newbie
Offline
Activity: 7
Merit: 0
|
|
September 07, 2017, 05:25:11 PM |
|
Hello FullZero and all, Thank you for this great rxOC v12, has been using it for two weeks with biostar tb250-btc pro 12pcie(but only 6 rx570 attached). Until today, I add another 6 rx570, it wont boot into my terminal, while I have enable 6+ gpu in bios, have set tolud to 3.5g, tried legacy/uefi combinations for storage and graphic in bios boot, still no luck today, the furthest I can go is until a message box pops telling me "the system is running in low graphics mode"(but I plug my hdmi into the same main gpu n monitor), if I click OK, it leads me to several options, 1, try running with default graphical mode 2, reconfigure graphics 3,trouble shoot the error 4, exit to console login but I was unable to choose other options except the first one, which brings me back to "the system is running in low graphics mode".... if I move to console 2, I could login to cli, and able to start claymore manually with 12 gpus working.
I am lost now, switching back to 6gpu, and everything is working perfectly.
Somebody please enlighten me to let all 12gpus working.
Thank you in advance
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
September 10, 2017, 05:06:48 PM |
|
Hello FullZero and all, Thank you for this great rxOC v12, has been using it for two weeks with biostar tb250-btc pro 12pcie(but only 6 rx570 attached). Until today, I add another 6 rx570, it wont boot into my terminal, while I have enable 6+ gpu in bios, have set tolud to 3.5g, tried legacy/uefi combinations for storage and graphic in bios boot, still no luck today, the furthest I can go is until a message box pops telling me "the system is running in low graphics mode"(but I plug my hdmi into the same main gpu n monitor), if I click OK, it leads me to several options, 1, try running with default graphical mode 2, reconfigure graphics 3,trouble shoot the error 4, exit to console login but I was unable to choose other options except the first one, which brings me back to "the system is running in low graphics mode".... if I move to console 2, I could login to cli, and able to start claymore manually with 12 gpus working.
I am lost now, switching back to 6gpu, and everything is working perfectly.
Somebody please enlighten me to let all 12gpus working.
Thank you in advance
I have had a similar experience using 6x proDuo (although this begins to happen when more than 3x proDuo are used) I will look into this more for v0013; for now what I am doing is starting the mining process via ssh on this rig, which is essentially the same as starting it manually from console mode, but easier as it doesn't require me to attach a monitor / keyboard / mouse to the rig. I noted the ip for the rig, then on another computer; I use the terminal cmd: and press enter, then type yes (if it is the first time I am accessing the rig via ssh), then I enter miner1 as the password (unless you have changed it) then I enter the cmd: this launches the OC, then mining process.
|
|
|
|
kusuma
Newbie
Offline
Activity: 7
Merit: 0
|
|
September 11, 2017, 03:41:52 PM |
|
Hello FullZero and all, Thank you for this great rxOC v12, has been using it for two weeks with biostar tb250-btc pro 12pcie(but only 6 rx570 attached). Until today, I add another 6 rx570, it wont boot into my terminal, while I have enable 6+ gpu in bios, have set tolud to 3.5g, tried legacy/uefi combinations for storage and graphic in bios boot, still no luck today, the furthest I can go is until a message box pops telling me "the system is running in low graphics mode"(but I plug my hdmi into the same main gpu n monitor), if I click OK, it leads me to several options, 1, try running with default graphical mode 2, reconfigure graphics 3,trouble shoot the error 4, exit to console login but I was unable to choose other options except the first one, which brings me back to "the system is running in low graphics mode".... if I move to console 2, I could login to cli, and able to start claymore manually with 12 gpus working.
I am lost now, switching back to 6gpu, and everything is working perfectly.
Somebody please enlighten me to let all 12gpus working.
Thank you in advance
I have had a similar experience using 6x proDuo (although this begins to happen when more than 3x proDuo are used) I will look into this more for v0013; for now what I am doing is starting the mining process via ssh on this rig, which is essentially the same as starting it manually from console mode, but easier as it doesn't require me to attach a monitor / keyboard / mouse to the rig. I noted the ip for the rig, then on another computer; I use the terminal cmd: and press enter, then type yes (if it is the first time I am accessing the rig via ssh), then I enter miner1 as the password (unless you have changed it) then I enter the cmd: this launches the OC, then mining process. Thank you so much for your reply, will give it a try tomorrow. Waiting for the better v013.
|
|
|
|
Hostels
Newbie
Offline
Activity: 31
Merit: 0
|
|
September 11, 2017, 06:27:29 PM |
|
Hi guys! This system have DAG FIX? I very happy of NVOS on P106 mining =) Now want RXOS for RX580 =) Thanks!
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
September 15, 2017, 07:09:40 PM |
|
Hello FullZero and all, Thank you for this great rxOC v12, has been using it for two weeks with biostar tb250-btc pro 12pcie(but only 6 rx570 attached). Until today, I add another 6 rx570, it wont boot into my terminal, while I have enable 6+ gpu in bios, have set tolud to 3.5g, tried legacy/uefi combinations for storage and graphic in bios boot, still no luck today, the furthest I can go is until a message box pops telling me "the system is running in low graphics mode"(but I plug my hdmi into the same main gpu n monitor), if I click OK, it leads me to several options, 1, try running with default graphical mode 2, reconfigure graphics 3,trouble shoot the error 4, exit to console login but I was unable to choose other options except the first one, which brings me back to "the system is running in low graphics mode".... if I move to console 2, I could login to cli, and able to start claymore manually with 12 gpus working.
I am lost now, switching back to 6gpu, and everything is working perfectly.
Somebody please enlighten me to let all 12gpus working.
Thank you in advance
I have had a similar experience using 6x proDuo (although this begins to happen when more than 3x proDuo are used) I will look into this more for v0013; for now what I am doing is starting the mining process via ssh on this rig, which is essentially the same as starting it manually from console mode, but easier as it doesn't require me to attach a monitor / keyboard / mouse to the rig. I noted the ip for the rig, then on another computer; I use the terminal cmd: and press enter, then type yes (if it is the first time I am accessing the rig via ssh), then I enter miner1 as the password (unless you have changed it) then I enter the cmd: this launches the OC, then mining process. Thank you so much for your reply, will give it a try tomorrow. Waiting for the better v013. Looking at this I just realized it will not work without modifications. I have been making the following modifications to rxOC before doing the above: copying oneBash to the /home/m1 directory then changing the line in 2unix to launch the oneBash located in the home directory rather than the windows partition: After making these changes you can ssh in as explained above and launch the OC + mining process using either: or
|
|
|
|
fullzero (OP)
Legendary
Offline
Activity: 1260
Merit: 1009
|
|
September 15, 2017, 07:10:22 PM |
|
Hi guys! This system have DAG FIX? I very happy of NVOS on P106 mining =) Now want RXOS for RX580 =) Thanks!
I will update the driver for the v0013
|
|
|
|
|