366Cobra
Newbie
Offline
Activity: 11
Merit: 0
|
|
December 07, 2017, 01:11:40 PM Last edit: December 08, 2017, 12:19:09 AM by 366Cobra |
|
Hi, I finally got my rig working and am using this cool tool. I do have one issue though. Under windows I can get 31.8MH/s at 102W, but under Linux I can only get 27.6MH/s and am using ~40W more power. The BIOS has been modded and the voltages have been set to 950mV. The cards that I am using are the Sapphire Nitro+ 8GB rx580 special edition (blue case, has both Samsung and Hylinx memory).
There are several users here, where some have reported better values than under windows. Would you be able to share your bios files, so that i can see where I messed up? I really do not want to mine under windows.
Thanks Martin
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
December 07, 2017, 11:14:39 PM |
|
Sounds like you may have not set the clocks for optimal under LINUX?
Might also be a driver issue - the "blockchain" driver was all about FIXING some sort of issue with ETH mining in particular, and I don't know which driver version rxOC uses.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
ianspooky
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 11, 2017, 10:43:04 AM |
|
Hi fullzero,
Thank you again for your great work. I've been using your latest version on 2 of my rigs w/ 13gpu each. I just redo the auto mining script on boot because of the GUI not loading when adding 7+ gpu. I just wanted to ask what tool do you use to create the image so i wont reconfigure again the mining on boot when i add again another rig.
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
December 11, 2017, 11:52:03 PM |
|
Hi fullzero,
Thank you again for your great work. I've been using your latest version on 2 of my rigs w/ 13gpu each. I just redo the auto mining script on boot because of the GUI not loading when adding 7+ gpu. I just wanted to ask what tool do you use to create the image so i wont reconfigure again the mining on boot when i add again another rig.
Get one copy working. Use "dd" to copy that DRIVE to another drive of the same or larger size. If you use the same MB and GPU setup (CPU and RAM can vary), you now have a working clone of the first system. In some cases, you can even use a DIFFERENT motherboard, but might have to go in and edit /etc/X11/xorg.conf to match up to the correct PCI bus identifiers.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
PdeW
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 13, 2017, 07:22:56 AM |
|
Hi! Just joined the forum because I urgently need to know why I cannot get the startup of rxOC to complete. Has anybody got this running on a ASUS B250 MINING EXPERT motherboard? I tried all settings suggested for different motherboards, but the initial startup hangs every time. Used two different USB Sandisk 16Mb sticks with same result. Verified that the download has the correct hash value. Cannot figure out what next to try. Please help.
|
|
|
|
kaprman
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 17, 2017, 02:11:29 PM Last edit: December 17, 2017, 02:24:40 PM by kaprman |
|
Hello, please can you help me? I have this problem. I can’t login. I use password miner1. What i do bad? https://youtu.be/jsMZ9yqs1ng
|
|
|
|
Vip11mkd
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 17, 2017, 04:08:10 PM |
|
Hi guys. I am new with all this and i need a little help setting up tje onebash file. I am using asus prine z270p mobo and 2x rx580 and 3x rx570. Can somebody please tell me what are the settings for the best hash rate?
|
|
|
|
Vip11mkd
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 19, 2017, 08:52:23 PM |
|
So i am using 2x rx580 8gb and one rx570. The one rx580 that is o the main x16 pcie only mines at 16.3mh/s and the other 2 gpus at 21 and 22mh . Anybody can tell me how to get more out of them?
|
|
|
|
|
Dhodge87
Newbie
Offline
Activity: 57
Merit: 0
|
|
December 19, 2017, 10:07:06 PM |
|
reserved
Are you supporting this still?
|
|
|
|
Dhodge87
Newbie
Offline
Activity: 57
Merit: 0
|
|
December 21, 2017, 05:24:08 PM |
|
How do I set the power limit for the 570/580 cards? Can I copy the code from the Nvidia version?
|
|
|
|
bumbu100
Newbie
Offline
Activity: 44
Merit: 0
|
|
December 26, 2017, 03:53:54 PM |
|
1. I can't login, after correct credentials and enter, it is going back to the login screen 2. can't start miner through terminal too
-----------------------------------++++++++++-----------------------------------
root@m1-desktop:~# bash 2unix workername: 108 rig IP: 192.168.3.108 00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06) 07:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X] 08:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/8970 OEM / R9 280X] =================== ROCm System Management Interface =================== ============================================================================ GPU[0] : PowerPlay not enabled - Cannot display clocks ============================================================================ =================== End of ROCm SMI Log ===================
=================== ROCm System Management Interface =================== GPU[0] : Cannot reset clocks: Performance Level not supported =================== End of ROCm SMI Log ===================
=================== ROCm System Management Interface =================== ============================================================================ GPU[0] : Unable to set current PowerPlay Level to high ============================================================================ =================== End of ROCm SMI Log ===================
=================== ROCm System Management Interface =================== GPU[0] : PowerPlay not enabled - Cannot set clocks =================== End of ROCm SMI Log ===================
=================== ROCm System Management Interface =================== GPU[0] : PowerPlay not enabled - Cannot set clocks =================== End of ROCm SMI Log ===================
Tue Dec 26 10:49:53 EST 2017 Action: Removing ... systemctl stop teamviewerd.service Failed to stop teamviewerd.service: Unit teamviewerd.service not loaded. fail
kill '/opt/teamviewer/tv_bin/script/teamviewer' - root (/home/m1/.local/share/teamviewer12 / /home/m1/.local/share/teamviewer12)
Failed to execute operation: No such file or directory try again, full path... Failed to execute operation: Invalid argument
=================== ROCm System Management Interface =================== ============================================================================ GPU[0] : Unable to determine current fan speed ============================================================================ GPU[0] : PowerPlay not enabled - Cannot set fan speed =================== End of ROCm SMI Log ===================
mining in screen: screen -r miner
-----------------------------------++++++++++-----------------------------------
and that's all........
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
December 26, 2017, 10:24:11 PM |
|
How do I set the power limit for the 570/580 cards? Can I copy the code from the Nvidia version?
Nope, the interface is completely different IF it exists at all under AMDGPU-PRO - that's a question I've been trying to find an answer to for many months (and most recently did ANOTHER round of web searching yesterday) and have yet to find an answer. AMD is WAY overdue to release a replacement for aticonfig from the fglrx days, though I'd REALLY prefer for MSI to release a LINUX version of Afterburner.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
psi3000
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 28, 2017, 03:10:09 PM |
|
Hi! Just joined the forum because I urgently need to know why I cannot get the startup of rxOC to complete. Has anybody got this running on a ASUS B250 MINING EXPERT motherboard? I tried all settings suggested for different motherboards, but the initial startup hangs every time. Used two different USB Sandisk 16Mb sticks with same result. Verified that the download has the correct hash value. Cannot figure out what next to try. Please help. I am TRYING to use it. It only hangs if i use the on board video. If I unplug the on board video it works for a few hours before it just stops mining. Not sure why. Im going to turn off overclocking, if i can figure out the settings (I believe its different then in my NVOC rig). Then I will re image the usb drive and let it re-run the config the first time. After that Im not sure what to do. Maybe playing with settings in the bios, as the B250 Mining expert mobo is not mentioned in the list of mobos and custome bios settings.
|
|
|
|
HaberHash
Newbie
Offline
Activity: 115
Merit: 0
|
|
December 28, 2017, 06:31:55 PM |
|
+1 unable to logon using miner1. Looks like we're stuck in some Ubuntu logon loop. I've tired deleting .Xauthority with no luck
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
December 28, 2017, 07:33:45 PM |
|
+1 unable to logon using miner1. Looks like we're stuck in some Ubuntu logon loop. I've tired deleting .Xauthority with no luck I don't have much experience with rxOC, but your problem usually comes from a broken display driver. Try to run this command from ssh or terminal (Ctrl - Alt - f1) then reboot Hope it helps
|
|
|
|
honus85
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 28, 2017, 11:59:26 PM |
|
I tried using this. Im not sure if I downloaded an old version or what. Rx580 4GB was hashing at 14MH/s so I tried upgrading the drivers. The OS using a custom 4.11 kernel which the blockchain drivers don't support to top it off damn difficult to upgrade Xserver to 1.19 Hwe stack! Spent so long trying to configure it that I gave up. The setup is quite bad sets your fan to 100% as well and ubuntu support sucks for the amd card. Spent two hard nights trying to get it working and no luck. Stick with windows 10, unlicensed it's free anyway. You can install gpu-z to check memory is Hynix or Elpida which doesn't seem possible in ubuntu. Save you all the hassle from installing windows 10 to initial stock 2xMH/s hashrate to flashing bios, 30.x MH/s in three hours!
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
December 29, 2017, 06:01:32 AM |
|
It's not that Ubuntu has poor AMD support - it's that AMD has poor LINUX support since the move to AMDGPU-PRO when it comes to those of us doing compute-type work.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
davidwillis
Newbie
Offline
Activity: 21
Merit: 0
|
|
December 29, 2017, 07:39:41 PM |
|
I am also stuck at the login screen loop.
sudo dpkg --configure -a didn't help. Any other ideas?
|
|
|
|
bumbu100
Newbie
Offline
Activity: 44
Merit: 0
|
|
December 31, 2017, 12:22:20 PM |
|
I am also stuck at the login screen loop.
sudo dpkg --configure -a didn't help. Any other ideas?
seems like many of us are stucked here.... but no way to pass over...
|
|
|
|
|