Megaminer 6.3 - Multi pool / Multi Algo launcher

[tutulfo]

Version 2.1


*Added info from Whattomine (profit) in manual mode menus, only for Whattomine available coins....
*Added Digibyte-groestl (DGB) to Suprnova
*Best menu load speed in manual mode with api info enabled
*Now miners with cero hashrate are shown on screen (it allows see bad benchmarks)
*Mayor changes on sgminer miner file
*Added stat option on password for allow statistics to Zpool,Yiimp and HR
*All ccminer has now 10sec error retry time (30sec before)
*Added ZecMiner for equihash on AMD platform

*Fixed: Deleted tribus algo from ccminer tpruvot miner file
*Fixed: Zpool API is returning bad data (too high profit) for X11 coin Hiro, this makes always select X11 algo
*Fixed: X17 Algo (Verge) not working
*Fixed: decred on manual mode not working on Suprnova
*Fixed: Algorithm parameter filter not working

[1714778237]

1714778237

[1714778237]

1714778237

[1714778237]

1714778237

[1714778237]

1714778237

[tutulfo]

I´m planning a very interesting thing ( for next release, it would be perfect in combination with a pool:

With autoexchange on
Must be posible select coin to mine, not algo as zpool or MPH


Anybody knows a pool like this?.

[coderasm]

I'm running mega miner, but getting illegal memory access errors on a few of the ccminers after they run for several minutes. I have 6 gtx 1070's with power at 70%, core clock 0 and memory at +650. I'm running driver 382.53. Is anyone else experiencing this? Does anyone have stable oc settings on a particular driver version?

[papampi]

I'm running mega miner, but getting illegal memory access errors on a few of the ccminers after they run for several minutes. I have 6 gtx 1070's with power at 70%, core clock 0 and memory at +650. I'm running driver 382.53. Is anyone else experiencing this? Does anyone have stable oc settings on a particular driver version?

I get some errors with same cards, tried with no OC too, but some times get BSOD

[papampi]

There is a problem when mining selected coins from different pools it does not convert suprnova benefit to bitcoin
for example I chose lbry, ethereum, zcash,sib,sia,decred to mine from suprnova,mph,zpool
So Lbry and decred stay on top with 1 mil benefit

[tutulfo]

There is a problem when mining selected coins from different pools it does not convert suprnova benefit to bitcoin
for example I chose lbry, ethereum, zcash,sib,sia,decred to mine from suprnova,mph,zpool
So Lbry and decred stay on top with 1 mil benefit

Pools that have only manual mode (suprnova at this moment) must not be mixed with automatic pools, I will add a check for this can´t be done.

Suprnova hasn´t an api to see profitability this is why can´t be included on autochange.


Interested thing I said two threads before is related to this....I think it will like you...

[tutulfo]

I'm running mega miner, but getting illegal memory access errors on a few of the ccminers after they run for several minutes. I have 6 gtx 1070's with power at 70%, core clock 0 and memory at +650. I'm running driver 382.53. Is anyone else experiencing this? Does anyone have stable oc settings on a particular driver version?

Megaminer...as its name not indicates  ... is not a "miner" is a launcher of miners, only set parameters and launch, result must be the same as manual launch with same parameters.

I´m using 384.94 drivers, my 1070´s at +650mem get errors too, it are at +90core +200mem 90%power limit and are rock solid


Also, you can try play with -i XX on launch, this is intensity of mining.

[katejcejs]

Tutulfo when I change interval to 600 I get this error, using latest 2.1 miner...

Cannot convert value "600-- Only NVIDIA tested, AMD must work, but not tested (for mixed rig set AMD,NVIDIA)" to type
"System.Int32". Error: "Input string was not in a correct format."
+         Start-Sleep ($Interval / 10)
+         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidArgument: ( [], RuntimeException
    + FullyQualifiedErrorId : InvalidCastFromStringToInteger

[tutulfo]

Tutulfo when I change interval to 600 I get this error, using latest 2.1 miner...

Cannot convert value "600-- Only NVIDIA tested, AMD must work, but not tested (for mixed rig set AMD,NVIDIA)" to type
"System.Int32". Error: "Input string was not in a correct format."
+         Start-Sleep ($Interval / 10)
+         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidArgument: ( [], RuntimeException
    + FullyQualifiedErrorId : InvalidCastFromStringToInteger

Seems as config.txt is not gettint new line after 600, try to enter 3 o 4 new lines after 600

[katejcejs]

tried 600-------, it gives the same error!

[tutulfo]

tried 600-------, it gives the same error!

I think it is related to different new line character between europe/usa, days ago someone told me he saw config.txt in one line only.

As workaround, try to copy/paste a new line from other variable.

Can you send me your config.txt to a mail I will tell you by private message? I need to see it to resolve.

[MikeBuzz]

tried 600-------, it gives the same error!

Edit the file with notepad++ or something like that, default windows notepad messes up the file

[katejcejs]

Fixed it I messed up config.txt....

[papampi]

Is it possible to do auto switch on suprnova based on whattomine in version 2.1?
Does this start bat gonna work?

-MiningMode Automatic -PoolsName suprnova -Coinsname ethereum,lbry,Zcash,zclassic,EthereumClassic,ZENCash,GroestlCoin

should I use short names like eth or full as ethereum ?

[tutulfo]

Is it possible to do auto switch on suprnova based on whattomine in version 2.1?
Does this start bat gonna work?

-MiningMode Automatic -PoolsName suprnova -Coinsname ethereum,lbry,Zcash,zclassic,EthereumClassic,ZENCash,GroestlCoin

should I use short names like eth or full as ethereum ?

I can announce 3.0 changes, I´m testing now, I must say has been hard work, harder than I thought.

*New "Virtual" Pool Whattomine, based in whattomine statistics, it use Suprnova and Yiimp servers to mine most profitable coin, you must configure wallets on config.cfg and also have an account on Suprnova to use.
*Now if miner screen is closed (manually or error) MM don´t need to wait interval defined time, in less than 15 sec it will detect error and continue execution
*Benchmark auto-interval, MM automatic set interval to 200 seconds for benchmarks, other executions are based on config.txt defined interval
*Added info on main screen of time left to next interval and local currency conversion, removed BTC/GH/day
*New ccminer tpruvot 2.2 (added algos in which it is fastest)--> recomended delete al tpruvot files on stat folder if you are copying from old version
*Removed ccminerpalginskunk, new tpruvot is faster on skunk algo
*Removed ccminerdjm, yescript no profitable
*All ccminer has now 4 retry times on fail
*Now hashrate shown is the maximum speed miner has reached anytime (benchmarking or running)
*Zpool will not show coin mined info, reason: not real info, pool choose a coin for each algo and not always is same as your hashrate more profitable
*Removed sgminer-skein
*Deleted skein algo for sgminer
*Changed X13 algo from ccminer-2.2 to faster ccminer-alexis
*Reorded info on main screen and added $/€ value.
*Added time info to next interval to main screnn
*Removed unused source code

[papampi]

WoW .... Amazing new features ...
Thanks a lot,
Cant wait for 3.0

[papampi]

Is it possible to add an api so we can check the mining coin, the pool, and the speed in a simple web page in the future releases?

[tutulfo]

Is it possible to add an api so we can check the mining coin, the pool, and the speed in a simple web page in the future releases?

I think is possible make a rest api, but no web server inside powershell, web must be external.

[preda]

This program is amazing... so many algorithms well done just need some improvement but i bet you will

[MikeBuzz]

Is it possible to do auto switch on suprnova based on whattomine in version 2.1?
Does this start bat gonna work?

-MiningMode Automatic -PoolsName suprnova -Coinsname ethereum,lbry,Zcash,zclassic,EthereumClassic,ZENCash,GroestlCoin

should I use short names like eth or full as ethereum ?

I can announce 3.0 changes, I´m testing now, I must say has been hard work, harder than I thought.

*New "Virtual" Pool Whattomine, based in whattomine statistics, it use Suprnova and Yiimp servers to mine most profitable coin, you must configure wallets on config.cfg and also have an account on Suprnova to use.
*Now if miner screen is closed (manually or error) MM don´t need to wait interval defined time, in less than 15 sec it will detect error and continue execution
*Benchmark auto-interval, MM automatic set interval to 200 seconds for benchmarks, other executions are based on config.txt defined interval
*Added info on main screen of time left to next interval and local currency conversion, removed BTC/GH/day
*New ccminer tpruvot 2.2 (added algos in which it is fastest)--> recomended delete al tpruvot files on stat folder if you are copying from old version
*Removed ccminerpalginskunk, new tpruvot is faster on skunk algo
*Removed ccminerdjm, yescript no profitable
*All ccminer has now 4 retry times on fail
*Now hashrate shown is the maximum speed miner has reached anytime (benchmarking or running)
*Zpool will not show coin mined info, reason: not real info, pool choose a coin for each algo and not always is same as your hashrate more profitable
*Removed sgminer-skein
*Deleted skein algo for sgminer
*Changed X13 algo from ccminer-2.2 to faster ccminer-alexis
*Reorded info on main screen and added $/€ value.
*Added time info to next interval to main screnn
*Removed unused source code

Nice set of changes, can you mine the new "Virtual Pool" along with MHP and Zpool