Megaminer 6.3 - Multi pool / Multi Algo launcher

[4ward]

AHASHPOOL only pay out in BTC, so you can change the definition to:

      User                  = $CoinsWallets.get_item('BTC')
      Pass                  = "c=BTC,$WorkerName,stats"

[sp_]

got this error message

Code:

Exception setting "WindowSize": "Window cannot be taller than 58.
Parameter name: value.Height
Actual value was 60."
At C:\Megaminer-4.6\Include.ps1:538 char:5
+     $psWindow.WindowSize= $newSize
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], SetValueInvocationException
    + FullyQualifiedErrorId : ExceptionWhenSetting

[4ward]

got this error message

Code:

Exception setting "WindowSize": "Window cannot be taller than 58.
Parameter name: value.Height
Actual value was 60."
At C:\Megaminer-4.6\Include.ps1:538 char:5
+     $psWindow.WindowSize= $newSize
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], SetValueInvocationException
    + FullyQualifiedErrorId : ExceptionWhenSetting

your screen size is too small for the window to resize. you can ignore it

[MikeBuzz]

Keeps looping on benchmark(something wrong with lbry ):


Next Interval:  431 secs
-----------------------------------------------------------------------------------------------------------------------
  (E)nd Interval   (P)rofits    (C)urrent    (H)istory    (W)allets                       |
-----------------------------------------------------------------------------------------------------------------------

------------------------------------------------ACTIVE MINERS----------------------------------------------------------

                  Speed      BTC/Day EUR/Day      Algorithm   Coin      Miner      Pool     Location PoolWorkers
                  -----      ------- -------      ---------   ----      -----      ----     -------- -----------
219.05 MH/s|255.56 MH/s Benchmarking Benchmarking ETHASH|LBRY ethereum| ClayDual40 NH|ZPOOL EUROPE


Any way to disable dualmine or lbry without changing in the powershellscript ?
I am gonna check more tomorrow, late now have to sleep

Check the stats file for this miner I bet the second row of numbers is 0, not sure why this happens but I have seen it before, delete the stats file and rerun it will then work

[STT]

https://prohashing.com
Professional x11 and scrypt mining pool
Prohashing is a profitable x11 and scrypt multipool that pays miners in any coin.

http://steakcloud.com
supports pooled minting as well as an unlimited number POS and POW mining options, our market leading Multi-Pay™ system is changing mining forever.


2 pools Im interested in if you feel like supporting them, they pay out in staking coins like Blackcoin which pays a yield on the wallet balance.   Also very cheap/fast to move which I find useful

[nitrobg]

ahashpool looks odd and the reported profit is way off. I've checked few times and always got a huge difference between reported hashrate and actual rewards.

My last reading for 30 minutes @91MH/s Denarius (tribus):
Megaminer reports 0.78 mBTC/day
Whattomine reports 0.277 mBTC/day (nearly 3 times less) and 7.70 DNR/day
For 30 minutes worth of mining I should be getting (best case scenario @ 100% luck) about 0.015 mBTC (according to MM), 0.0055 mBTC (according to WTM), or 0.16 DNR. Correct?
Site reported correctly my hashrate, no rejects, it also showed up on the graph. However I got credited: 0.034351 DNR, 1.145% share, 0.00114 mBTC - 13 times less than expected.

I have noticed the same pattern a few times before but I wanted to be sure.
Can anyone confirm?

[tutulfo]

got this error message

Code:

Exception setting "WindowSize": "Window cannot be taller than 58.
Parameter name: value.Height
Actual value was 60."
At C:\Megaminer-4.6\Include.ps1:538 char:5
+     $psWindow.WindowSize= $newSize
+     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], SetValueInvocationException
    + FullyQualifiedErrorId : ExceptionWhenSetting

Check your Terminal Server screen resolution option, this error is due to extremely low resolution (less than 58 text characters width)

[tutulfo]

Keeps looping on benchmark(something wrong with lbry ):


Next Interval:  431 secs
-----------------------------------------------------------------------------------------------------------------------
  (E)nd Interval   (P)rofits    (C)urrent    (H)istory    (W)allets                       |
-----------------------------------------------------------------------------------------------------------------------

------------------------------------------------ACTIVE MINERS----------------------------------------------------------

                  Speed      BTC/Day EUR/Day      Algorithm   Coin      Miner      Pool     Location PoolWorkers
                  -----      ------- -------      ---------   ----      -----      ----     -------- -----------
219.05 MH/s|255.56 MH/s Benchmarking Benchmarking ETHASH|LBRY ethereum| ClayDual40 NH|ZPOOL EUROPE


Any way to disable dualmine or lbry without changing in the powershellscript ?
I am gonna check more tomorrow, late now have to sleep

I will add check to avoid this on next release, while you can delete stat file and run benchmark again.

[tutulfo]

https://prohashing.com
Professional x11 and scrypt mining pool
Prohashing is a profitable x11 and scrypt multipool that pays miners in any coin.

http://steakcloud.com
supports pooled minting as well as an unlimited number POS and POW mining options, our market leading Multi-Pay™ system is changing mining forever.


2 pools Im interested in if you feel like supporting them, they pay out in staking coins like Blackcoin which pays a yield on the wallet balance.   Also very cheap/fast to move which I find useful

X11,sha256 and scypt algos are Asics Territory, GPUs are not profitable, have I missed something?

[tutulfo]

ahashpool looks odd and the reported profit is way off. I've checked few times and always got a huge difference between reported hashrate and actual rewards.

My last reading for 30 minutes @91MH/s Denarius (tribus):
Megaminer reports 0.78 mBTC/day
Whattomine reports 0.277 mBTC/day (nearly 3 times less) and 7.70 DNR/day
For 30 minutes worth of mining I should be getting (best case scenario @ 100% luck) about 0.015 mBTC (according to MM), 0.0055 mBTC (according to WTM), or 0.16 DNR. Correct?
Site reported correctly my hashrate, no rejects, it also showed up on the graph. However I got credited: 0.034351 DNR, 1.145% share, 0.00114 mBTC - 13 times less than expected.

I have noticed the same pattern a few times before but I wanted to be sure.
Can anyone confirm?

MM only shows pools estimation for your hashrate, I dont know how pools make it but, except Nicehash for obvious reasons, all are higher than real profit always. I would take profit estimation only as coin A is more profitable now than B but not as future profit estimation.

I can tell my profit last days on Ahashpool is higher than any other automatic pool (some days 2x)

[flylife]

Any plans to add pools run on the z-nomp pool system, like nibirupool.com. Also hash-to-coins.com?

[tutulfo]

Any plans to add pools run on the z-nomp pool system, like nibirupool.com. Also hash-to-coins.com?

Hash-to-coins only has ASICS profitable algos.

nibirupool has no stats about profit, only could run on manual mode (you must select coin).

[tutulfo]

4.7 Release

*Added CCMiner-Xevan for Xevan algo (NVIDIA)
*Added CCMiner-Polytmos for Polytmos algo (NVIDIA) (thx MikeBuzz)
*Added Nsgminer for Neoscrypt (AMD)
*Upgraded prospector to 0.0.13-ALPHA
*Upgrade Excavator to v1.3.7a
*Upgrade CCminer-Klaust to 8.15
*Added to Suprnova.cc: STACKS (STACK), POLYTMOS (POLY)
*Nvidia optimized miner for each algorithm
*Live config.txt, now you can change config.txt values without restarting MM
*Changed donation mechanism, now donation is always on MiningPoolHub

*Fixed: sometimes benchmark for dualmining is saved with second algo zero value
*Fixed: claymore Cryptonote not working due to wrong parameters
*Fixed: incorrect live profit shown on Automatic24h mode
*Fixed: ahashpool Automatic24h mode not working

[jbonifacio]

Getting this using Mining Pool Hub and trying to benchmark BLAKE2B (siacoin) - all others seem to work fine and I can mine fine if I remove CcminerKlaust.json from the miner directory:

Code:

cminer 8.15-KlausT (64bit) for nVidia GPUs
Compiled with Visual Studio 2015 using Nvidia CUDA Toolkit 9.0

Based on pooler cpuminer 2.3.2 and the tpruvot@github fork
CUDA support by Christian Buchner, Christian H. and DJM34
Includes optimizations implemented by sp-hash, klaust, tpruvot and tsiv.

[2017-11-26 15:25:59] NVML GPU monitoring enabled.
[2017-11-26 15:25:59] 1 miner thread started, using 'sia' algorithm.
[2017-11-26 15:25:59] Starting Stratum on stratum+tcp://us-east.hub.miningpoolhub.com:20550
[2017-11-26 15:25:59] Stratum authorize answer id is not correct!

[tutulfo]

Getting this using Mining Pool Hub and trying to benchmark BLAKE2B (siacoin) - all others seem to work fine and I can mine fine if I remove CcminerKlaust.json from the miner directory:

Code:

cminer 8.15-KlausT (64bit) for nVidia GPUs
Compiled with Visual Studio 2015 using Nvidia CUDA Toolkit 9.0

Based on pooler cpuminer 2.3.2 and the tpruvot@github fork
CUDA support by Christian Buchner, Christian H. and DJM34
Includes optimizations implemented by sp-hash, klaust, tpruvot and tsiv.

[2017-11-26 15:25:59] NVML GPU monitoring enabled.
[2017-11-26 15:25:59] 1 miner thread started, using 'sia' algorithm.
[2017-11-26 15:25:59] Starting Stratum on stratum+tcp://us-east.hub.miningpoolhub.com:20550
[2017-11-26 15:25:59] Stratum authorize answer id is not correct!

It seems a Mph or KlaustT problem. Klaust miner file has various algos, edit and delete blake2b line inside, dont remove miner file.

[Schleicher]

Getting this using Mining Pool Hub and trying to benchmark BLAKE2B (siacoin) - all others seem to work fine and I can mine fine if I remove CcminerKlaust.json from the miner directory:

Code:

cminer 8.15-KlausT (64bit) for nVidia GPUs
Compiled with Visual Studio 2015 using Nvidia CUDA Toolkit 9.0

Based on pooler cpuminer 2.3.2 and the tpruvot@github fork
CUDA support by Christian Buchner, Christian H. and DJM34
Includes optimizations implemented by sp-hash, klaust, tpruvot and tsiv.

[2017-11-26 15:25:59] NVML GPU monitoring enabled.
[2017-11-26 15:25:59] 1 miner thread started, using 'sia' algorithm.
[2017-11-26 15:25:59] Starting Stratum on stratum+tcp://us-east.hub.miningpoolhub.com:20550
[2017-11-26 15:25:59] Stratum authorize answer id is not correct!

It seems a Mph or KlaustT problem. Klaust miner file has various algos, edit and delete blake2b line inside, dont remove miner file.

Miningpoolhub is using a different stratum protocol for sia than Nicehash. The miner is only compatible with Nicehash.

[nitrobg]

tutulfo, how do I switch to internal wallet on nicehash?

The ugly way is to edit

Code:

$CoinsWallets.get_item('BTC')+'.'+$Workername

to:

Code:

'nhaddress.'+$Workername

but is there a better way of doing it?

[MikeBuzz]

tutulfo, how do I switch to internal wallet on nicehash?

The ugly way is to edit

Code:

$CoinsWallets.get_item('BTC')+'.'+$Workername

to:

Code:

'nhaddress.'+$Workername

but is there a better way of doing it?

See the following

https://github.com/tutulino/Megaminer/pull/106

[4ward]

tutulfo, how do I switch to internal wallet on nicehash?

The ugly way is to edit

Code:

$CoinsWallets.get_item('BTC')+'.'+$Workername

to:

Code:

'nhaddress.'+$Workername

but is there a better way of doing it?

i just made it like that:

User          = $CoinsWallets.get_item('NH-BTC')+'.'+$Workername

[nitrobg]

MPH has added a field in their API for a time since the last block:

I added "last_block" field at getminingandprofitsstatistics api as you requested.
It's unixtimestamp number.

Since the pool uses PPLNS, it would be smart to auto extend the interval until a block is found (or end it earlier), otherwise the user would lose all his earnings for the round.
The same applies for YIIMP-based pools as well - they also include "timesincelast" in /api/currencies, which should be used to determine whether the script should switch to next coin or not.