Megaminer 6.3 - Multi pool / Multi Algo launcher

[tutulfo]

5.0 Beta 4 Release

*Gpugroups now are optional
*Eliminated screen Flickering
*Reduced CPU usage
*Upgrades dtsm nvdia equihash miner to 0.5.7
*Added SgminerHmq1725, SgminerHSR, SgminerBitcore,SgminerPhi (thx MikeBuzz)
*Added CastXMR 0.8 for AMD
*Reorganized and corrected config.txt, I expect more noob friendly (thx MikeBuzz & jbonifacio)
*Added ClaymoreETH 10.2 for AMD
*Renamed miners files for best type identification
*New "additional miners" folder, this folder will contain miners deactivated but useful for some people, you must move file/s to miners folder to activate
*Added "hidden" option to force miner apiport instead of dynamic port asignation (this option can be used only if one group of that type is defined on your rig). To use you must set "APIPORT"=PORT in miner file.
*Added "hidden" key (S) for restore screen size
*Reactivated MPH sia pool, this pool is not compatible with ccminer, Blake2b must not be added to any ccminer

*Fixed: nsgminer not receiving rigth devices parameter
*Fixed: ewbf/dtsm not receiving rigth devices parameter
*Fixed: claymore miners not receiving rigth devices parameters
*Fixed: dualmining not working on Whattomine virtual Pool
*Fixed: wallets not showing on Whattomine virtual Pool
*Fixed: duplicated wallets on wallet screen
*Fixed: low difficulty share error for kecckak algo
*Fixed: Unimining pool 24h mode not showing profit

[cashen]

I'm still having issues monitoring my rigs through awesomeminer.

Do I have to add something special or disable something?

[cryptopanda99]

Thanks tutulfo that fixed the problem. However now I am seeing another odd problem. This problem is happening with both your beta 4 release and beta 3 release. When I have it mining multiple pools everything work great for about an hour or 2 and then it will suddenly lose a pool. The lost pool will not show up at all in the profits screen and the miner never switches to the lost pool once its gone. This happens to both the GPU miners and CPU miners. Any ideas? Thanks! 

[tutulfo]

I'm still having issues monitoring my rigs through awesomeminer.

Do I have to add something special or disable something?

Now you can force port as you did before, must use "APIPORT": XXXX in each miner file.

[tutulfo]

I'm still having issues monitoring my rigs through awesomeminer.

Do I have to add something special or disable something?

Now you can force port as you did before, must use "APIPORT": XXXX in each miner file.

It is reported on github also. I never use more than one pool, I will do to get error and analyze.

[christ007]

I'm the only one who's CCminer crash on benchmark ?

what does it do?

https://www.evernote.com/l/ABjcLTCVjxRAxKVAumrSl-jFtgx4ewIE27g
CCminer crash

[jbonifacio]

I'm the only one who's CCminer crash on benchmark ?

what does it do?

https://www.evernote.com/l/ABjcLTCVjxRAxKVAumrSl-jFtgx4ewIE27g
CCminer crash

Set memory overclock to 0

That's what resolved my ccminer memory crash issues.

[jbonifacio]

Beta 4 heads-up!

Make sure lines 27 - 46 are commented out in core.ps1 - with the latest beta 4 release the pool was accidentally left hard coded to ahashpool in automatic mode.

[tutulfo]

Beta 4 heads-up!

Make sure lines 27 - 46 are commented out in core.ps1 - with the latest beta 4 release the pool was accidentally left hard coded to ahashpool in automatic mode.

true...re-released, download it again, I see last time bug and correct in this upload

[Nekor]

I think I may make a WPF or UWP gui for this, if you like that idea tutulfo let me know.

[geck]

updated to 5beta 4 and now hash_refinery pool is not working if i use it with MPH.

The error I get is

Get-Member : You must specify an object for the Get-Member cmdlet.
At C:\Miners\Megaminer-5.0-beta4\Megaminer-5.0-beta4\pools\Hash_Refinery.ps1:87 char:23
+         $HR_Request | Get-Member -MemberType NoteProperty | Select-Ob ...
+                       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : CloseError: ( [Get-Member], InvalidOperationException
    + FullyQualifiedErrorId : NoObjectInGetMember,Microsoft.PowerShell.Commands.GetMemberCommand
Get-Member : You must specify an object for the Get-Member cmdlet.
At C:\Miners\Megaminer-5.0-beta4\Megaminer-5.0-beta4\pools\Hash_Refinery.ps1:87 char:23
+         $HR_Request | Get-Member -MemberType NoteProperty | Select-Ob ...
+                       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : CloseError: ( [Get-Member], InvalidOperationException
    + FullyQualifiedErrorId : NoObjectInGetMember,Microsoft.PowerShell.Commands.GetMemberCommand

It works fine if i use hash_refinery on its own

[tutulfo]

updated to 5beta 4 and now hash_refinery pool is not working if i use it with MPH.

The error I get is

Get-Member : You must specify an object for the Get-Member cmdlet.
At C:\Miners\Megaminer-5.0-beta4\Megaminer-5.0-beta4\pools\Hash_Refinery.ps1:87 char:23
+         $HR_Request | Get-Member -MemberType NoteProperty | Select-Ob ...
+                       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : CloseError: ( [Get-Member], InvalidOperationException
    + FullyQualifiedErrorId : NoObjectInGetMember,Microsoft.PowerShell.Commands.GetMemberCommand
Get-Member : You must specify an object for the Get-Member cmdlet.
At C:\Miners\Megaminer-5.0-beta4\Megaminer-5.0-beta4\pools\Hash_Refinery.ps1:87 char:23
+         $HR_Request | Get-Member -MemberType NoteProperty | Select-Ob ...
+                       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : CloseError: ( [Get-Member], InvalidOperationException
    + FullyQualifiedErrorId : NoObjectInGetMember,Microsoft.PowerShell.Commands.GetMemberCommand

It works fine if i use hash_refinery on its own

Working well here, when do you get error? Start, new interval?

[tutulfo]

I think I may make a WPF or UWP gui for this, if you like that idea tutulfo let me know.

Any help is welcome, I have this in to-do list, but I never work with WPF before and I priorize other features.


You can make a fork and add an example screen, if results are good we will replace all text interface.

[geck]

updated to 5beta 4 and now hash_refinery pool is not working if i use it with MPH.

The error I get is

Get-Member : You must specify an object for the Get-Member cmdlet.
At C:\Miners\Megaminer-5.0-beta4\Megaminer-5.0-beta4\pools\Hash_Refinery.ps1:87 char:23
+         $HR_Request | Get-Member -MemberType NoteProperty | Select-Ob ...
+                       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : CloseError: ( [Get-Member], InvalidOperationException
    + FullyQualifiedErrorId : NoObjectInGetMember,Microsoft.PowerShell.Commands.GetMemberCommand
Get-Member : You must specify an object for the Get-Member cmdlet.
At C:\Miners\Megaminer-5.0-beta4\Megaminer-5.0-beta4\pools\Hash_Refinery.ps1:87 char:23
+         $HR_Request | Get-Member -MemberType NoteProperty | Select-Ob ...
+                       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : CloseError: ( [Get-Member], InvalidOperationException
    + FullyQualifiedErrorId : NoObjectInGetMember,Microsoft.PowerShell.Commands.GetMemberCommand

It works fine if i use hash_refinery on its own

Working well here, when do you get error? Start, new interval?

yup at the start. I had to manually set hash_refinery on its own for the benchmark to run too

[jbonifacio]

See an oddity - the status screen shows:

1070        7.9 gh/s 0.22452 4,224.01 TRIBUS         N-CcminerTpruvot H.RFRY US       98

But the single 1070 card I have didn't bench at gh/s. Also the coin columns are blank.

Code:

-------------------------------------------   MegaMiner 5.0 beta 4   --------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------
  (E)nd Interval   (P)rofits    (C)urrent    (H)istory    (W)allets                       |
-----------------------------------------------------------------------------------------------------------------------

GroupName      Speed BTC/Day  USD/Day Algorithm Coin Miner            Pool   Location PoolWorkers
---------      ----- -------  ------- --------- ---- -----            ----   -------- -----------
1080       63.1 mh/s 0.00180    33.88 TRIBUS         N-CcminerTpruvot H.RFRY US       98
1070        7.9 gh/s 0.22452 4,224.01 TRIBUS         N-CcminerTpruvot H.RFRY US       98
1070ti    241.6 mh/s 0.00690   129.75 TRIBUS         N-CcminerTpruvot H.RFRY US       98


----------------------------------------------------PROFITS------------------------------------------------------------
(B)est Miners/All       (T)op 8/All


   GroupName: 1080

Algorithm Coin Miner              Speed      BTC/Day USD/Day PoolFee MinerFee Pool   Location
--------- ---- -----              -----      ------- ------- ------- -------- ----   --------
TRIBUS         N-CcminerTpruvot   59.6 mh/s  0.00168   31.62   1.25%    0.00% H.RFRY US
X17            N-ccminerPalgin    10.2 mh/s  0.00048    9.10   1.25%          H.RFRY US
LYRA2V2        N-CcminerPolytmos  41.5 mh/s  0.00046    8.62   1.25%          H.RFRY US
NIST5          N-ccminerAlexisHSR 47.2 mh/s  0.00039    7.36   1.25%    0.00% H.RFRY US
XEVAN          N-CcminerXevan     3.3 mh/s   0.00036    6.71   1.25%          H.RFRY US
NEOSCRYPT      N-CcminerKlaust    957.8 kh/s 0.00025    4.68   1.25%          H.RFRY US
PHI            N-CcminerTpruvot   18.8 mh/s  0.00022    4.23   1.25%    0.00% H.RFRY US
BITCORE        N-ccminerSkunk     16.4 mh/s  0.00018    3.45   1.25%          H.RFRY US


   GroupName: 1070ti

Algorithm Coin Miner             Speed      BTC/Day USD/Day PoolFee MinerFee Pool   Location
--------- ---- -----             -----      ------- ------- ------- -------- ----   --------
TRIBUS         N-CcminerTpruvot  221.7 mh/s 0.00625  117.56   1.25%    0.00% H.RFRY US
LYRA2V2        N-CcminerPolytmos 164.7 mh/s 0.00182   34.21   1.25%          H.RFRY US
NIST5          N-CcminerPolytmos 187.7 mh/s 0.00156   29.29   1.25%          H.RFRY US
XEVAN          N-CcminerXevan    13.0 mh/s  0.00140   26.31   1.25%          H.RFRY US
NEOSCRYPT      N-CcminerKlaust   3.9 mh/s   0.00102   19.20   1.25%          H.RFRY US
PHI            N-CcminerTpruvot  71.2 mh/s  0.00085   16.00   1.25%    0.00% H.RFRY US
X17            N-ccminerPalgin   14.9 mh/s  0.00071   13.28   1.25%          H.RFRY US
BITCORE        N-ccminer-2.2     62.7 mh/s  0.00070   13.17   1.25%    0.00% H.RFRY US


   GroupName: 1070



Algorithm Coin Miner             Speed      BTC/Day USD/Day PoolFee MinerFee Pool   Location
--------- ---- -----             -----      ------- ------- ------- -------- ----   --------
TRIBUS         N-CcminerTpruvot  69.5 mh/s  0.00196   36.87   1.25%    0.00% H.RFRY US
X17            N-ccminerPalgin   11.8 mh/s  0.00056   10.55   1.25%          H.RFRY US
LYRA2V2        N-CcminerPolytmos 50.0 mh/s  0.00055   10.38   1.25%          H.RFRY US
NIST5          N-CcminerPolytmos 57.9 mh/s  0.00048    9.04   1.25%          H.RFRY US
XEVAN          N-CcminerXevan    3.7 mh/s   0.00040    7.58   1.25%          H.RFRY US
PHI            N-CcminerTpruvot  21.6 mh/s  0.00026    4.87   1.25%    0.00% H.RFRY US

[tutulfo]

See an oddity - the status screen shows:

1070        7.9 gh/s 0.22452 4,224.01 TRIBUS         N-CcminerTpruvot H.RFRY US       98

But the single 1070 card I have didn't bench at gh/s. Also the coin columns are blank.

Delete stat file for 1070_Tribus, sometimes miners returns extremely high results, this is reason miners cant be benchmarked while running.


Not all pools works at coin level, most works algo level (coin column empty)

[geck]

updated to 5beta 4 and now hash_refinery pool is not working if i use it with MPH.

The error I get is

Get-Member : You must specify an object for the Get-Member cmdlet.
At C:\Miners\Megaminer-5.0-beta4\Megaminer-5.0-beta4\pools\Hash_Refinery.ps1:87 char:23
+         $HR_Request | Get-Member -MemberType NoteProperty | Select-Ob ...
+                       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : CloseError: ( [Get-Member], InvalidOperationException
    + FullyQualifiedErrorId : NoObjectInGetMember,Microsoft.PowerShell.Commands.GetMemberCommand
Get-Member : You must specify an object for the Get-Member cmdlet.
At C:\Miners\Megaminer-5.0-beta4\Megaminer-5.0-beta4\pools\Hash_Refinery.ps1:87 char:23
+         $HR_Request | Get-Member -MemberType NoteProperty | Select-Ob ...
+                       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : CloseError: ( [Get-Member], InvalidOperationException
    + FullyQualifiedErrorId : NoObjectInGetMember,Microsoft.PowerShell.Commands.GetMemberCommand

It works fine if i use hash_refinery on its own

Working well here, when do you get error? Start, new interval?

To expand, if i only use hash refinery it works. However if there are more than two pools i get this after a while
Next Interval:  5 secs...
-------------------------------------------   MegaMiner 5.0 beta 4   --------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------
  (E)nd Interval   (P)rofits    (C)urrent    (H)istory    (W)allets                       |
-----------------------------------------------------------------------------------------------------------------------

GroupName      Speed BTC/Day GBP/Day Algorithm Coin     Miner             Pool   Location PoolWorkers
---------      ----- ------- ------- --------- ----     -----             ----   -------- -----------
1080ti     80.1 mh/s 0.00079   11.46 NIST5              N-CcminerPolytmos H.RFRY US       442
VEGA64    567.9 mh/s 0.00041    5.87 SKEIN     digibyte A-SgminerSkein    MPH    US


PS>TerminatingError(Invoke-WebRequest): "The operation has timed out."
Next Interval:  179 secs...
-------------------------------------------   MegaMiner 5.0 beta 4   --------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------
  (E)nd Interval   (P)rofits    (C)urrent    (H)istory    (W)allets                       |
-----------------------------------------------------------------------------------------------------------------------

GroupName    Speed BTC/Day GBP/Day Algorithm Coin     Miner           Pool Location PoolWorkers
---------    ----- ------- ------- --------- ----     -----           ---- -------- -----------
1080ti    0.0 ph/s 0.00000    0.00 SKEIN     digibyte N-ccminerAlexis MPH  US
VEGA64    0.0 ph/s 0.00000    0.00 SKEIN     digibyte A-SgminerSkein  MPH  US

After the error, hash refinery doesn't return. Is megaminer dropping a pool if there is a failed connection? Would it try to contact the pool again?

edit: Oh found this in the log too

Checking H.RFRY - BTC

PS>TerminatingError(New-Object): "Exception calling ".ctor" with "2" argument(s): "No connection could be made because the target machine actively refused it 127.0.0.1:2482""
Next Interval:  169 secs...

[nzangel]

Not support 12 GPU

"GroupName" : "1060","Type":"NVIDIA","GpuPlatform":"0","Gpus":"0,1,2,3,4,5,6,7,8,9,10,11"

program error can used 0-9  only 10 gpu


PlatformId Name        Vendor
---------- ----        ------
         0 NVIDIA CUDA NVIDIA Corporation

No MM gpu number limit, but I think some miners has. What error your get?

https://pasteboard.co/GYBiHL7.png

[hastrup]

-- **********************************************************************************************************
-- ********************                                                                  ********************
-- ********************                           BASIC OPTIONS                          ********************
-- ********************                                                                  ********************
-- **********************************************************************************************************

-- Your rig ID

@@WORKERNAME=your_workername

-- Preferred currency you want to receive. Only used for anonymous pools with auto exchange such as Zpool, HR, ...
-- You must set your wallet for this currency within the Wallets Section found in the Advanced Options section.

@@CURRENCY=BTC

-- Local currency shown within the profits screen (DOLLAR, EURO, GBP)

@@LOCALCURRENCY=EURO

-- Location of your rig: EUROPE/US/ASIA (by default "US" will be used for pools that don't require or support this setting)

@@LOCATION=EUROPE

-- Pool user name for non-anonymous pools such as SprNova, BlocksFactory, or MiningPoolHub
-- You can ingore this settig if you're not using these types of pools

@@USERNAME=mining_pool_hub_a940afcf2019a8f5c76d92b27e990d94d515a692ede14096d591563bd84190e0

-- WALLETS for auto exchange pools. You only need set a wallet for your preferred currency (@@currency).
-- Other pools without an auto exchange, like Yiimp, will need a wallet defined for the same coin you are mining.
-- You can add wallets using pattern  @@WALLET_XXX=YYYYY (where XXX=currency symbol; YYYYY=your wallet).
-- For Nicehash if a @@WALLET_BTC_NICE=XXXXXXX is found it will be used, if not @@WALLET_BTC will be used.
-- For some coins, such as Electroneum, you will need a Payment ID. Add it after your address separated by a dot.

@@WALLET_BTC=YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
@@WALLET_XXX=ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ

-- Number of minutes to mine as a donation each day (NOT PERCENT)

@@DONATE=5

-- Use your cpu to mine: ENABLED = yes, DISABLED = no (you can start cpu alone mining also using -groupnames parameter in batch file)

@@CPUMINING=DISABLED

-- **********************************************************************************************************
-- ********************                                                                  ********************
-- ********************   ADVANCED OPTIONS (don't change unless you know what they do)   ********************
-- ********************                                                                  ********************
-- **********************************************************************************************************


-- Profit recheck interval time (in seconds - less than 600 not recommended)
-- This interval recalculates and selects the most profitable algorithm

@@INTERVAL=600

-- Benchmarks interval time (less than 200 not recommended)

@@BENCHMARKTIME=200

-- Screen to be shown at script start-up (WALLETS/CURRENT/HISTORY/PROFITS)

@@STARTSCREEN=PROFITS

-- [OPTIONAL] API Keys
-- Some non-anonymous pools, such as Suprnova and MPH, require API keys to obtain wallet details.
-- For example @@APIKEY_MINING_POOL_HUB=a04e6sx30b38f73878ae40775f70efseff6582e8ec37600215755487ccbd36b4510b4
-- FORMAT: @@APIKEY_NAMEOFPOOL=XXXXXXXXXX) [optional]


-- [OPTIONAL] GPU Groups
-- You can group your cards as you want. It's recommended to create a group for each card model in your rig, each group will be benchmarked and run separately (you can identify your GPU id's by launching GpuList.bat)
-- If you change any of your group names you must delete the stats folder contents and re-run benchmarks.
-- Type must be NVIDIA or AMD, if you dont set groups MM automatically makes 2 groups, one for all NVIDIA gpus and other for all AMD gpus
-- Example for rig with 3 NVIDIA gpu, each gpu alone @@GPUGROUPS=[{"GroupName" : "Card1","Type":"NVIDIA","Gpus":"0"},{"GroupName" : "Card2","Type":"NVIDIA","Gpus":"0"},{"GroupName" : "Card3","Type":"NVIDIA","Gpus":"0"}]
-- Example for rig with 5 NVIDIA and 2 AMD @@GPUGROUPS=[{"GroupName" : "1080","Type":"NVIDIA","Gpus":"0,1,2,3,4"} , {"GroupName" : "RX580","Type":"AMD","Gpus":"0,1"} ]


-- Number of minutes to mine as a donation each day (NOT PERCENT)

@@DONATE=5

-- Use your cpu to mine: ENABLED = yes, DISABLED = no (you can start cpu alone mining also using -groupnames parameter in batch file)

@@CPUMINING=DISABLED

-- **********************************************************************************************************
-- ********************                                                                  ********************
-- ********************   ADVANCED OPTIONS (don't change unless you know what they do)   ********************
-- ********************                                                                  ********************
-- **********************************************************************************************************


-- Profit recheck interval time (in seconds - less than 600 not recommended)
-- This interval recalculates and selects the most profitable algorithm

@@INTERVAL=600

-- Benchmarks interval time (less than 200 not recommended)

@@BENCHMARKTIME=200

-- Screen to be shown at script start-up (WALLETS/CURRENT/HISTORY/PROFITS)

@@STARTSCREEN=PROFITS

-- [OPTIONAL] API Keys
-- Some non-anonymous pools, such as Suprnova and MPH, require API keys to obtain wallet details.
-- For example @@APIKEY_MINING_POOL_HUB=a04e6sx30b38f73878ae40775f70efseff6582e8ec37600215755487ccbd36b4510b4
-- FORMAT: @@APIKEY_MINING_POOL_HUB=a04e6sx30b38f73878ae40775f70efseff6582e8ec37600215755487ccbd36b4510b4 ) [optional]


-- [OPTIONAL] GPU Groups
-- You can group your cards as you want. It's recommended to create a group for each card model in your rig, each group will be benchmarked and run separately (you can identify your GPU id's by launching GpuList.bat)
-- If you change any of your group names you must delete the stats folder contents and re-run benchmarks.
-- Type must be NVIDIA or AMD, if you dont set groups MM automatically makes 2 groups, one for all NVIDIA gpus and other for all AMD gpus
-- Example for rig with 3 NVIDIA gpu, each gpu alone @@GPUGROUPS=[{"GroupName" : "Card1","Type":"NVIDIA","Gpus":"0"},{"GroupName" : "Card2","Type":"NVIDIA","Gpus":"0"},{"GroupName" : "Card3","Type":"NVIDIA","Gpus":"0"}]
-- Example for rig with 5 NVIDIA and 2 AMD @@GPUGROUPS=[{"GroupName" : "1080","Type":"NVIDIA","Gpus":"0,1,2,3,4"} , {"GroupName" : "RX580","Type":"AMD","Gpus":"0,1"} ]


where do i put my sprnova and mining pool hub api?

[sconklinbtc]

-- [OPTIONAL] API Keys
-- Some non-anonymous pools, such as Suprnova and MPH, require API keys to obtain wallet details.
-- For example @@APIKEY_MINING_POOL_HUB=a04e6sx30b38f73878ae40775f70efseff6582e8ec37600215755487ccbd36b4510b4
-- FORMAT: @@APIKEY_MINING_POOL_HUB=a04e6sx30b38f73878ae40775f70efseff6582e8ec37600215755487ccbd36b4510b4 ) [optional]



where do i put my sprnova and mining pool hub api?

Just put add them at the bottom using the format above

@@APIKEY_MINING_POOL_HUH=<<insert api key>>
@@APIKEY_SUPRNOVA=<<insert api key>>

I've never used this, but that does seem to be what is being described in the file.