Megaminer 6.3 - Multi pool / Multi Algo launcher

[tutulfo]

Hello guys! How to change location to europe? When I replace "-Location US" with "-Location eURoPe" I can't connect to the pools.

?....Default location in config.txt is Europe

[dudel42]

I would like to use ZPool as a backup pool only when the main pool is offline. I guess the easiest way to implement would be to divide all the profits by 10, so the main pool would always appear more profitable.

Any drawback to that solution by just adding a zero to the end of the divisor? Only one I can think of right now is forgetting about it when updating the scripts -- so a custom multiplier per pool in the config would be nice...

[tutulfo]

I would like to use ZPool as a backup pool only when the main pool is offline. I guess the easiest way to implement would be to divide all the profits by 10, so the main pool would always appear more profitable.

Any drawback to that solution by just adding a zero to the end of the divisor? Only one I can think of right now is forgetting about it when updating the scripts -- so a custom multiplier per pool in the config would be nice...

At this moment divide the profits is good solution.

[tutulfo]

5.2 Release

*More acurated benchmark system, now benchmarks are also updated while mining
*Power cost now affects profit (real for NVIDIA, estimated model based for AMD)
*Added Power, revenues, efficiency and pool detected hashrate, to active miners section, note: this speed is usually based on las 5 minutes shares and is pools refresh speed dependant.
*Redesigned and more informatives log files
*Added screen info while interval is starting
*Added power limit percent and Gpu Group in current screen
*New stats screen (old screens are reorganize)
*Changed default miner intensities and config options to ensure default options stability
*Removed delay close miner option from code due to unstable executions
*Moved Mkxminer and excavator to Additional Miners folder (you must add manually to miner folder if you want to try)
*Updated ccminer tpruvot to 2.2.4
*Updated bminer to 5.1.0
*Updated Claymore Dual to 10.4
*Updated Nsgminer to 0.9.4
*Updated ccminer klaust to 8.18
*Updated cpu miner xmrig to 2.4.4
*Updated cpu miner jaydee to 3.7.9
*New sgminer phi fork
*Added Altminer Pool

*Fixed: some wallets from sprnova and mining pool hub not shown on wallets screen
*Fixed: Nicehash wrong fee when using nicehash specific wallet
*Fixed: donation time not used for donation if next interval is for benchmark

NOTE: YOU MUST ADD THIS VARIABLE TO CONFIG.TXT OR CONFIGURE FROM NEW RELEASE WHERE IT IS INCLUDED : @@electricitycost
NOTE: STATS FILE ARE NOT COMPATIBLE WITH PREVIOUS RELEASES, YOU MUST BENCHMARK AGAIN

[twente-mining]

@@electricitycost

I like this feature, but calculating in BTC is tricky because of the btc fluctuating price, best is to set fixed euro/dollar prices..

For example the kwh price here for me is between 7-23 o clock = 0,13884 euro and 23-7 oclock = 0,12674 euro.

The wattages are available in the program, so maybe calculate at that way ?

[mo35]

testing on AMD , there is some issues with Nanopool (when running dual Claymore ETH/DCR) , miner itself working ok , but getting spammed with errors like this:


01/16/2018 15:17:36...... ###### ERROR ##### Cannot index into a null array. at , C:\Megaminer-5.2\pools\NANOPOOL.ps1: line 50
at , C:\Megaminer-5.2\Include.ps1: line 1014
at Get_Pools, C:\Megaminer-5.2\Include.ps1: line 1007
at , C:\Megaminer-5.2\core.ps1: line 977
at , C:\Megaminer-5.2\core.ps1: line 968
at , : line 1

[dudel42]

I would like to use ZPool as a backup pool only when the main pool is offline. I guess the easiest way to implement would be to divide all the profits by 10, so the main pool would always appear more profitable.

Any drawback to that solution by just adding a zero to the end of the divisor? Only one I can think of right now is forgetting about it when updating the scripts -- so a custom multiplier per pool in the config would be nice...

At this moment divide the profits is good solution.

Code:

                $Request | Get-Member -MemberType properties| ForEach-Object {
                                
                                $coin=$Request | Select-Object -ExpandProperty $_.name

                                $Zpool_Algo =  get_algo_unified_name ($_.name)

                            
                                $Divisor = (Get_Algo_Divisor $Zpool_Algo) / 1000

Is this the correct place? I'll change it to divide by 10000, so it should always be less than other pool...

[nitrobg]

@@electricitycost

I like this feature, but calculating in BTC is tricky because of the btc fluctuating price, best is to set fixed euro/dollar prices..

For example the kwh price here for me is between 7-23 o clock = 0,13884 euro and 23-7 oclock = 0,12674 euro.

The wattages are available in the program, so maybe calculate at that way ?

Calculate the average hourly cost yourself.
(daily * 16 + nightly * 8 ) / 24 = average power per hour

[4ward]

@@electricitycost

I like this feature, but calculating in BTC is tricky because of the btc fluctuating price, best is to set fixed euro/dollar prices..

For example the kwh price here for me is between 7-23 o clock = 0,13884 euro and 23-7 oclock = 0,12674 euro.

The wattages are available in the program, so maybe calculate at that way ?

agree on that

btc price can fluctuate 10-20% in a week, so better set the prices in local currency

[tutulfo]

@@electricitycost

I like this feature, but calculating in BTC is tricky because of the btc fluctuating price, best is to set fixed euro/dollar prices..

For example the kwh price here for me is between 7-23 o clock = 0,13884 euro and 23-7 oclock = 0,12674 euro.

The wattages are available in the program, so maybe calculate at that way ?

Calculate the average hourly cost yourself.
(daily * 16 + nightly * 8 ) / 24 = average power per hour

It is unnecessary, you can put two periods with different prices,

I will change electricity cost to local currency, I did not thought btc price fluctuation

[Hawkezor]

There is an error in N-CcminerTpruvot.json

{"lyra2v2" : "-a lyra2z" }

[bttalkdim2]

Why Removed delay close miner option ??
I was very happy with this option.
I even set this to 40 sec, to insure no downtime on switching.
And it's work very well!

[jbonifacio]

Why Removed delay close miner option ??
I was very happy with this option.
I even set this to 40 sec, to insure no downtime on switching.
And it's work very well!

Check the release notes for his explanation.

[car1999]

do u want to support palgin's hsr neoscrypt miner?

[jbonifacio]

Started testing 5.2 and the stats screen has exaggerated values. For example, id 9 (X17) says the time is 18906 minutes which is impossible. None of these values should be over 600 minutes. Great work though - the additional information is great.

Code:

--------------------------------------------------------------  STATS  -------------------------------------------------------------------
Start Time: 01/16/2018 11:22:40                                                                             Running Mode: AUTOMATIC


   GroupName: 1060

Id Algorithm      Pool   Miner              Launch Time      Best Status  Last
-- ---------      ----   -----              ------ ----      ---- ------  ----
12 SKEIN          H.RFRY N-CcminerPolytmos       1 63 min       1 Idle    1/16/2018 11:41:12 AM
13 NIST5          H.RFRY N-CcminerPolytmos       6 8452 min     9 Idle    1/16/2018 6:57:43 PM
10 LYRA2V2        H.RFRY N-CcminerPolytmos       1 62 min       1 Idle    1/16/2018 12:09:15 PM
11 MYRIAD-GROESTL H.RFRY N-CcminerPolytmos       1 62 min       1 Idle    1/16/2018 12:02:16 PM
14 BITCORE        H.RFRY N-ccminerSkunk          1 62 min       1 Idle    1/16/2018 12:23:15 PM
17 LYRA2V2        H.RFRY N-CcminerTpruvot        1 62 min       1 Idle    1/16/2018 12:16:14 PM
18 XEVAN          H.RFRY N-CcminerXevan          2 635 min      2 Idle    1/16/2018 2:22:02 PM
15 SKUNK          H.RFRY N-CcminerTpruvot        7 5413 min     8 Running 1/16/2018 7:21:30 PM
16 TRIBUS         H.RFRY N-CcminerTpruvot        7 6839 min     9 Idle    1/16/2018 5:35:28 PM
 9 X17            H.RFRY N-ccminerPalgin         8 18906 min   15 Idle    1/16/2018 6:47:33 PM
 2 X17            H.RFRY N-ccminerAlexis         1 62 min       1 Idle    1/16/2018 11:27:11 AM
 3 NIST5          H.RFRY N-ccminerAlexis         1 64 min       1 Idle    1/16/2018 11:48:14 AM
 0 BITCORE        H.RFRY N-ccminer-2.2           1 62 min       1 Idle    1/16/2018 12:26:44 PM
 1 SKEIN          H.RFRY N-ccminerAlexis         1 63 min       1 Idle    1/16/2018 11:44:43 AM
 4 LYRA2V2        H.RFRY N-ccminerAlexisHSR      1 62 min       1 Idle    1/16/2018 12:12:45 PM
 7 NEOSCRYPT      H.RFRY N-CcminerKlaust         5 2327 min     5 Idle    1/16/2018 6:05:55 PM
 8 LYRA2V2        H.RFRY N-CcminerNanashi        1 62 min       1 Idle    1/16/2018 12:19:45 PM
 5 NIST5          H.RFRY N-ccminerAlexisHSR      1 62 min       1 Idle    1/16/2018 11:55:16 AM
 6 MYRIAD-GROESTL H.RFRY N-CcminerKlaust         1 62 min       1 Idle    1/16/2018 12:05:45 PM

[tutulfo]

Why Removed delay close miner option ??
I was very happy with this option.
I even set this to 40 sec, to insure no downtime on switching.
And it's work very well!

too unstable

[tutulfo]

Started testing 5.2 and the stats screen has exaggerated values. For example, id 9 (X17) says the time is 18906 minutes which is impossible. None of these values should be over 600 minutes. Great work though - the additional information is great.

Code:

--------------------------------------------------------------  STATS  -------------------------------------------------------------------
Start Time: 01/16/2018 11:22:40                                                                             Running Mode: AUTOMATIC


   GroupName: 1060

Id Algorithm      Pool   Miner              Launch Time      Best Status  Last
-- ---------      ----   -----              ------ ----      ---- ------  ----
12 SKEIN          H.RFRY N-CcminerPolytmos       1 63 min       1 Idle    1/16/2018 11:41:12 AM
13 NIST5          H.RFRY N-CcminerPolytmos       6 8452 min     9 Idle    1/16/2018 6:57:43 PM
10 LYRA2V2        H.RFRY N-CcminerPolytmos       1 62 min       1 Idle    1/16/2018 12:09:15 PM
11 MYRIAD-GROESTL H.RFRY N-CcminerPolytmos       1 62 min       1 Idle    1/16/2018 12:02:16 PM
14 BITCORE        H.RFRY N-ccminerSkunk          1 62 min       1 Idle    1/16/2018 12:23:15 PM
17 LYRA2V2        H.RFRY N-CcminerTpruvot        1 62 min       1 Idle    1/16/2018 12:16:14 PM
18 XEVAN          H.RFRY N-CcminerXevan          2 635 min      2 Idle    1/16/2018 2:22:02 PM
15 SKUNK          H.RFRY N-CcminerTpruvot        7 5413 min     8 Running 1/16/2018 7:21:30 PM
16 TRIBUS         H.RFRY N-CcminerTpruvot        7 6839 min     9 Idle    1/16/2018 5:35:28 PM
 9 X17            H.RFRY N-ccminerPalgin         8 18906 min   15 Idle    1/16/2018 6:47:33 PM
 2 X17            H.RFRY N-ccminerAlexis         1 62 min       1 Idle    1/16/2018 11:27:11 AM
 3 NIST5          H.RFRY N-ccminerAlexis         1 64 min       1 Idle    1/16/2018 11:48:14 AM
 0 BITCORE        H.RFRY N-ccminer-2.2           1 62 min       1 Idle    1/16/2018 12:26:44 PM
 1 SKEIN          H.RFRY N-ccminerAlexis         1 63 min       1 Idle    1/16/2018 11:44:43 AM
 4 LYRA2V2        H.RFRY N-ccminerAlexisHSR      1 62 min       1 Idle    1/16/2018 12:12:45 PM
 7 NEOSCRYPT      H.RFRY N-CcminerKlaust         5 2327 min     5 Idle    1/16/2018 6:05:55 PM
 8 LYRA2V2        H.RFRY N-CcminerNanashi        1 62 min       1 Idle    1/16/2018 12:19:45 PM
 5 NIST5          H.RFRY N-ccminerAlexisHSR      1 62 min       1 Idle    1/16/2018 11:55:16 AM
 6 MYRIAD-GROESTL H.RFRY N-CcminerKlaust         1 62 min       1 Idle    1/16/2018 12:05:45 PM

Thanks, fixed next release / master code upload

[tutulfo]

do u want to support palgin's hsr neoscrypt miner?

I have miner file developed but benchmark fails. It will be better with an api but without it can work with wrapper if "total speed" line appears but sometimes this line not apears for hours.

[geck]

Why Removed delay close miner option ??
I was very happy with this option.
I even set this to 40 sec, to insure no downtime on switching.
And it's work very well!

too unstable

can we have a switch to enable this for those who didn't have instability? I agree this is/was an awesome function

Also, could the stats update function be modified to not accept new values outside of a range? Sometimes i don't get enough shares for the proper hashrate to be updated, causing the stats file to have abnormally low value.

Perhaps values outside of 10% will be considered abnormal, and not be updated to the benchmark file?

[OverEasy]

Good idea adding electric cost but this makes no sense to me

--Electricity cost, you can use this converter to get your BTC cost http://www.xe.com/es/currencyconverter/convert/?Amount=0%2C012&From=EUR&To=XBT
--Example for all day cost [{"HourStart":0,"HourEnd":23,"CostKwhBTC":0.00000105609}]
--Example for two periods cost [{"HourStart":12,"HourEnd":21,"CostKwhBTC":0.00000105609},{"HourStart":22,"HourEnd":11,"CostKwhBTC":0.00000703759}]

@@ELECTRICITYCOST=[{"HourStart":0,"HourEnd":23,"CostKwhBTC":0.00000105609}]

How in the world does this calculate the cost of my electric? It doesn't even take into account my actual cost.
It also doesn't take into account the number of watts per rig.

I pay .10 / Kw in the winter and .14 in the summer

How about something like this
@@ELECTRICITYCOST=.10
@@RIGWATT=830

I don't get it man. I removed that line for now.

Please explain in great detail how this line works
thanks