Megaminer 6.3 - Multi pool / Multi Algo launcher

[tutulfo]

This is an example os how power limit feature works at 18 cents/€ power cost

MM is selecting not only best miner for each algo, also is selecting more profitable power limit for each gpu group

First screen with "show best miners only" screen option active
Second screen with "show best miners only" screen option no active (screens not taken at same moment)

[celofan]

6.0 b1
No power information for skein and x11gost algo

GroupName MMPowLmt LocalSpeed   Rev./Day Rev./Day Profit/Day Algorithm Coin     Miner             Power Efficiency PoolSpeed Workers Loc.   Pool
--------- -------- ----------   -------- -------- ---------- --------- ----     -----             ----- ---------- --------- ------- ----   ----
NVIDIA               2.8 gh/s 0.00094btc   8.6736     8.6736 SKEIN     digibyte N-CcminerPolytmos     W     ∞ ph/W  0.0 ph/s         Europe MPH

[lambite]

i cant make the @@ELECTRICITYCOST work can you show me an example of how to set it up in euros?

Thanks!

[tutulfo]

i cant make the @@ELECTRICITYCOST work can you show me an example of how to set it up in euros?

Thanks!

Config.txt examples are bad, I re-release again

This is valid

@@ELECTRICITYCOST=[{"HourStart":0,"HourEnd":23,"CostKwh":0.00000105609}]

[tutulfo]

6.0 b1
No power information for skein and x11gost algo

GroupName MMPowLmt LocalSpeed   Rev./Day Rev./Day Profit/Day Algorithm Coin     Miner             Power Efficiency PoolSpeed Workers Loc.   Pool
--------- -------- ----------   -------- -------- ---------- --------- ----     -----             ----- ---------- --------- ------- ----   ----
NVIDIA               2.8 gh/s 0.00094btc   8.6736     8.6736 SKEIN     digibyte N-CcminerPolytmos     W     ∞ ph/W  0.0 ph/s         Europe MPH

See "Currents" screen, power is card level not algo level. What gpu name do you have?

[celofan]

6.0 b1
No power information for skein and x11gost algo

GroupName MMPowLmt LocalSpeed   Rev./Day Rev./Day Profit/Day Algorithm Coin     Miner             Power Efficiency PoolSpeed Workers Loc.   Pool
--------- -------- ----------   -------- -------- ---------- --------- ----     -----             ----- ---------- --------- ------- ----   ----
NVIDIA               2.8 gh/s 0.00094btc   8.6736     8.6736 SKEIN     digibyte N-CcminerPolytmos     W     ∞ ph/W  0.0 ph/s         Europe MPH

See "Currents" screen, power is card level not algo level. What gpu name do you have?

EVGA 1080ti FTW3
UPD:This screen only was if Ccminer-polytmos used.
If any other miner works-no errors, power and efficiency fields show all values correctly.
P.S. Under benchmark only

[sass0]

Will give it a try... Looks good

[zorvalth]

@tutulfo, can you give an example how to set a couple of custom pools for Whattomine(Virtual Pools)

I tried to enable this:
$Pools +=[pscustomobject]@{"coin" = "PIRL";"algo"="Ethash"; "symbol"= "PIRL";"server"="pirl.minerpool.net"; "port"= "8004";"location"="US";"User"="XXX";"Pass" = "YYY";"fee"="0";"Abbname"="MinerP";"WalletMode"="NONE"}

and added pirl address in the config.txt just to get the idea but still says no pools....

[tutulfo]

@tutulfo, can you give an example how to set a couple of custom pools for Whattomine(Virtual Pools)

I tried to enable this:
$Pools +=[pscustomobject]@{"coin" = "PIRL";"algo"="Ethash"; "symbol"= "PIRL";"server"="pirl.minerpool.net"; "port"= "8004";"location"="US";"User"="XXX";"Pass" = "YYY";"fee"="0";"Abbname"="MinerP";"WalletMode"="NONE"}

and added pirl address in the config.txt just to get the idea but still says no pools....

That line is obsolete, dont work anymore. To add a pool you need:

- Create a pool file (you can take flypool as non api pool example)
- Add that pool in config.txt wtmorder variable

[zorvalth]

- Add that pool in config.txt wtmorder variable

I dont see anything like this in the config.txt?

[tutulfo]

- Add that pool in config.txt wtmorder variable

I dont see anything like this in the config.txt?

@@WHATTOMINEPOOLORDER

[zorvalth]

- Add that pool in config.txt wtmorder variable

I dont see anything like this in the config.txt?

@@WHATTOMINEPOOLORDER

This does not exist in the config.txt,  but i tried to add "@@WHATTOMINEPOOLORDER=FLYPOOL" at the bottom of the config. Flypool is existing pool anyway and when i run START and chose Whattomine the result is still:

"NO POOLS!....retry in 10 sec --- REMEMBER, IF YOUR ARE MINING ON ANONYMOUS WITHOUT AUTOEXCHANGE POOLS LIKE YIIMP, NANOPOOL, ETC. YOU MUST SET WALLET FOR AT LEAST ONE POOL COIN IN CONFIG.TXT"


p.s. my bad, i forgot to add ZEC address.

Thanks!

[tutulfo]

- Add that pool in config.txt wtmorder variable

I dont see anything like this in the config.txt?

@@WHATTOMINEPOOLORDER

This does not exist in the config.txt,  but i tried to add "@@WHATTOMINEPOOLORDER=FLYPOOL" at the bottom of the config. Flypool is existing pool anyway and when i run START and chose Whattomine the result is still:

"NO POOLS!....retry in 10 sec --- REMEMBER, IF YOUR ARE MINING ON ANONYMOUS WITHOUT AUTOEXCHANGE POOLS LIKE YIIMP, NANOPOOL, ETC. YOU MUST SET WALLET FOR AT LEAST ONE POOL COIN IN CONFIG.TXT"


p.s. my bad, i forgot to add ZEC address.

Thanks!

You found a bug, added variable to master branch config.txt file.

I just try @@WHATTOMINEPOOLORDER=Flypool and it works for me.


If you are using old batch file, WTM pool name is now "Whattomine" before was "Whattomine_virtual"

[zorvalth]

Ok, if I add flypool to config wtmorder and zec address it works ok. But I tried adding DSR address and UNIMINING to wtmorder and says no pool?

Is that normal?


udpate: I left DSR address and changed wtmorder to "Zpool" and it started mining LBRY....

[tutulfo]

Ok, if I add flypool to config wtmorder and zec address it works ok. But I tried adding DSR address and UNIMINING to wtmorder and says no pool?

Is that normal?


udpate: I left DSR address and changed wtmorder to "Zpool" and it started mining LBRY....

Only pools that allow working at coin level works well with whattomine, Zpool only let selecting algo to mine (coin is chosen by pool), Lbry works because coin and algo has same name.

You can see difference in coin column at main screen, zpool shows algo name and zergpool, mph, yiimp shows coin real name.

[zorvalth]

Ok, if I add flypool to config wtmorder and zec address it works ok. But I tried adding DSR address and UNIMINING to wtmorder and says no pool?

Is that normal?


udpate: I left DSR address and changed wtmorder to "Zpool" and it started mining LBRY....

Only pools that allow working at coin level works well with whattomine, Zpool only let selecting algo to mine (coin is chosen by pool), Lbry works because coin and algo has same name.

You can see difference in coin column at main screen, zpool shows algo name and zergpool, mph, yiimp shows coin real name.

Ok, Can you give me a tip how is the best way to set a specific coins on pools like yiimp type like BSOD, Uniminig, Altminer for mining not using their api, but WTM calc.

Lets say I want to mine VIVO, LUX and GBX on altminer, CRC on BSOD and letting WTM logic to choose the most profitable and not the pools api?

[tutulfo]

Ok, if I add flypool to config wtmorder and zec address it works ok. But I tried adding DSR address and UNIMINING to wtmorder and says no pool?

Is that normal?


udpate: I left DSR address and changed wtmorder to "Zpool" and it started mining LBRY....

Only pools that allow working at coin level works well with whattomine, Zpool only let selecting algo to mine (coin is chosen by pool), Lbry works because coin and algo has same name.

You can see difference in coin column at main screen, zpool shows algo name and zergpool, mph, yiimp shows coin real name.

Ok, Can you give me a tip how is the best way to set a specific coins on pools like yiimp type like BSOD, Uniminig, Altminer for mining not using their api, but WTM calc.

Lets say I want to mine VIVO, LUX and GBX on altminer, CRC on BSOD and letting WTM logic to choose the most profitable and not the pools api?

Altminer is not supported via API due to API restrictions, but you can create a manual pool file like flypool.

For what you want you must:

1. Make a pool file for each pool with coins you are interested
2. Define that pools in WTM config variable
3. Call MM for WTM pool

Personally, I dont like the idea of search for most profitable if you are not using autoexchange pools (like  MPH or Zergpool) or change coins at that moment in your exchange, profit calculation has a strong component of instant exchange rate for coin.

[zorvalth]

Ok, if I add flypool to config wtmorder and zec address it works ok. But I tried adding DSR address and UNIMINING to wtmorder and says no pool?

Is that normal?


udpate: I left DSR address and changed wtmorder to "Zpool" and it started mining LBRY....

Only pools that allow working at coin level works well with whattomine, Zpool only let selecting algo to mine (coin is chosen by pool), Lbry works because coin and algo has same name.

You can see difference in coin column at main screen, zpool shows algo name and zergpool, mph, yiimp shows coin real name.

Ok, Can you give me a tip how is the best way to set a specific coins on pools like yiimp type like BSOD, Uniminig, Altminer for mining not using their api, but WTM calc.

Lets say I want to mine VIVO, LUX and GBX on altminer, CRC on BSOD and letting WTM logic to choose the most profitable and not the pools api?

Altminer is not supported via API due to API restrictions, but you can create a manual pool file like flypool.

For what you want you must:

1. Make a pool file for each pool with coins you are interested
2. Define that pools in WTM config variable
3. Call MM for WTM pool

Personally, I dont like the idea of search for most profitable if you are not using autoexchange pools (like  MPH or Zergpool) or change coins at that moment in your exchange, profit calculation has a strong component of instant exchange rate for coin.

Ok I will try. Depends, I have an app which checks my cryptopia balance and trade selected coins to BTC every 5 mins. This way I get way better auto exchange because most of autoexhcange pools need 10-12 hours to get coins on the exchange and convert them.

[jbonifacio]

I have powerlevels set to 90,80,70,60 and mm has been benchmarking power 90 for over 10 hours. I see the stat files for the 1060 and 1070 (26 for each). Not sure why it's stuck on 90. I did start as Administrator.

[celofan]

Very unstable release for me.
1. ccminer alexis not working, but in release 5.2 alexis worrking stable.Copy ccminer alexis from 5.2 to 6.0b1 solve this problem.
2. Restarts intervals.I.e. miner starts and interval is 600sec. When 60-70-80-90sec ends, miner can restart with new interval count value.
3. Never ends benchmark (after closing MM and starts it again some miners can start benchmark again).
4. Excavator can't mine neoscrypt algo (when added in json file)."Cuda ERROR - Not enough of memory" message shown, but the same release of excavator separately works for me.
And how i can disable miningpoolhub for excavator only? It works for nicehash perfectly.
5. Can you add palgin hsr miner in next release? https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows , https://github.com/palginpav/hsrminer/tree/master/HSR%20algo/Windows
Excavator and palgin hsr miners are the best neoscrypt miners for Nvidia pascal based cards (compared with Klaust - about 10% difference).
Thank you!