Megaminer 6.3 - Multi pool / Multi Algo launcher

[flipflop.0]

Today I got issues with the coindesk api. MM could not receive it. Opened the address in my browser, it worked. So I set the timeout in core.ps1 to 5 seconds and it also worked in MM.

Suggestion for a failsave: Would it be possible to save the last api locally and call the local file if the api is not available online? Or, as an alternative, save the output from the coindesk api in the log file and use last stats from the logs if the api is unavailable?

[OverEasy]

Miner running pretty good.
With this new version I often lose the profits screen on AMD rigs.
No data on screen.

Anyways can you PLEASE implement BlazePool ASAP. Zerg just has too many issues.
http://blazepool.com/

thanks

[tutulfo]

Miner running pretty good.
With this new version I often lose the profits screen on AMD rigs.
No data on screen.

Anyways can you PLEASE implement BlazePool ASAP. Zerg just has too many issues.
http://blazepool.com/

thanks

Added Blazepool on master branch code.


Please check last code, if bug still appears open an issue in github and upload log (with @@debuglog option enabled)

[tutulfo]

Today I got issues with the coindesk api. MM could not receive it. Opened the address in my browser, it worked. So I set the timeout in core.ps1 to 5 seconds and it also worked in MM.

Suggestion for a failsave: Would it be possible to save the last api locally and call the local file if the api is not available online? Or, as an alternative, save the output from the coindesk api in the log file and use last stats from the logs if the api is unavailable?

While MM is running, if coindesk api is not responding, last right call data are used, but data are not stored from one MM cold execution to other.

[tutulfo]

Today I got issues with the coindesk api. MM could not receive it. Opened the address in my browser, it worked. So I set the timeout in core.ps1 to 5 seconds and it also worked in MM.

Suggestion for a failsave: Would it be possible to save the last api locally and call the local file if the api is not available online? Or, as an alternative, save the output from the coindesk api in the log file and use last stats from the logs if the api is unavailable?

 

While MM is running, if coindesk api is not responding, last right call data are used, but data are not stored from one MM start to other.

[OverEasy]

Miner running pretty good.
With this new version I often lose the profits screen on AMD rigs.
No data on screen.

Anyways can you PLEASE implement BlazePool ASAP. Zerg just has too many issues.
http://blazepool.com/

thanks

Added Blazepool on master branch code.


Please check last code, if bug still appears open an issue in github and upload log (with @@debuglog option enabled)

Thanks I am on BlazePool now with all miners. BlazePool.ps1 had some old zpool stuff in it i changed with find / replace.
I'm not sure if its BlazePool site or what but they seem to need ID=x to pass the rig name. I think MM is passing C=BTC,Rigx
Maybe...Check on that please. I have no worker names showing. Might be Blaze site....
Thanks for implementing pool so fast!

[allpozitiv]

Dear tutulfo,

When staring *start* file, after selection all pools under 99 index, I got the following issue as below,



it is smth with Get-MpPreference, it is saying that it is not recognazing as command.

[celofan]

Please, tell me the correct filling of the cost of electricity at two cost zones.
In MM for example presents next string: [{"HourStart":12,"HourEnd":21,"CostKwh":0.105609},{"HourStart":22,"HourEnd":11,"CostKwh":0.703759}]
I have a day zone from 7-00 to 23-00 cost 0.000006 btc and night zone from 23-00 to 7-00 cost 0.000003 btc
So how i can correct fill it?
@@ELECTRICITYCOST=[{"HourStart":7,"HourEnd":23,"CostKwh":0.000006},{"HourStart":23,"HourEnd":7,"CostKwh":0.000003}]
or
@@ELECTRICITYCOST=[{"HourStart":7,"HourEnd":23,"CostKwh":0.000006},{"HourStart":00,"HourEnd":6,"CostKwh":0.000003}] ?
Or any other way with minutes?
And how many digits is correct value?
I.e. correct is 7 or 07 or doesn't matter?
And how MM will calculate 00 hours?
Tnx.

[tutulfo]

Please, tell me the correct filling of the cost of electricity at two cost zones.
In MM for example presents next string: [{"HourStart":12,"HourEnd":21,"CostKwh":0.105609},{"HourStart":22,"HourEnd":11,"CostKwh":0.703759}]
I have a day zone from 7-00 to 23-00 cost 0.000006 btc and night zone from 23-00 to 7-00 cost 0.000003 btc
So how i can correct fill it?
@@ELECTRICITYCOST=[{"HourStart":7,"HourEnd":23,"CostKwh":0.000006},{"HourStart":23,"HourEnd":7,"CostKwh":0.000003}]
or
@@ELECTRICITYCOST=[{"HourStart":7,"HourEnd":23,"CostKwh":0.000006},{"HourStart":00,"HourEnd":6,"CostKwh":0.000003}] ?
Or any other way with minutes?
And how many digits is correct value?
I.e. correct is 7 or 07 or doesn't matter?
And how MM will calculate 00 hours?
Tnx.

@@ELECTRICITYCOST=[{"HourStart":7,"HourEnd":23,"CostKwh":0.000006},{"HourStart":00,"HourEnd":6,"CostKwh":0.000003}] ?


9 and 09  both are correct

MM compares system hour with your config

[tutulfo]

Dear tutulfo,

When staring *start* file, after selection all pools under 99 index, I got the following issue as below,



it is smth with Get-MpPreference, it is saying that it is not recognazing as command.

This lines add MM path to windows defender exclusions. If you have added manually you can delete them


Do you have windows 7?

[tutulfo]

Miner running pretty good.
With this new version I often lose the profits screen on AMD rigs.
No data on screen.

Anyways can you PLEASE implement BlazePool ASAP. Zerg just has too many issues.
http://blazepool.com/

thanks

Added Blazepool on master branch code.


Please check last code, if bug still appears open an issue in github and upload log (with @@debuglog option enabled)

Thanks I am on BlazePool now with all miners. BlazePool.ps1 had some old zpool stuff in it i changed with find / replace.
I'm not sure if its BlazePool site or what but they seem to need ID=x to pass the rig name. I think MM is passing C=BTC,Rigx
Maybe...Check on that please. I have no worker names showing. Might be Blaze site....
Thanks for implementing pool so fast!

Uploaded with that changes

[celofan]

Incorrect hashrate,power and profit calculation for cpu when cpumining is enabled.

[DrTerrible]

I really like Megaminer but whenever I need to re-start my computer, and start MM up again, it seems like my benchmarking never saves. I am constantly benchmarking. Stats folder is looks ok I guess.

I have 2 rigs. Nvidia and AMD. Nvidia works fine but AMD is always benchmarking.

Not sure what the problem is

[flipflop.0]

Hi tutulfo, short question. Going through the Include.ps1, I wonder if it is possible to set the max power limit of the GPU to a fixed number, not a percentage?

So for example, 150w for one card instead of 80%. This would be very useful, but I am not sure if that is something possible to do by software.

Keep up the good work 

[tutulfo]

Incorrect hashrate,power and profit calculation for cpu when cpumining is enabled.

I have opened issue for jaydee cpu miner, it is not returning speed in api call.

[tutulfo]

I really like Megaminer but whenever I need to re-start my computer, and start MM up again, it seems like my benchmarking never saves. I am constantly benchmarking. Stats folder is looks ok I guess.

I have 2 rigs. Nvidia and AMD. Nvidia works fine but AMD is always benchmarking.

Not sure what the problem is

There is no difference between AMD and NVIDIA for benchmarking.


You must have a file in stats folder for each algo/miner combo. Inside that file you must have speeds reads, only speeds for 2/3 last of intervaltime are valid for hashrate calculation

[tutulfo]

Hi tutulfo, short question. Going through the Include.ps1, I wonder if it is possible to set the max power limit of the GPU to a fixed number, not a percentage?

So for example, 150w for one card instead of 80%. This would be very useful, but I am not sure if that is something possible to do by software.

Keep up the good work 

Not possible but you can calculate this fixed number percent and set to that percent.
 

[zorvalth]

@tutulfo , is there any chance to make the script to take the api infro from WTM from http://whattomine.com/calculators.json and not from http://whattomine.com/coins.json. Cons.json are only the coins listed in the main page , on calculators.json there way more coins like lux and bsd which algos are not listed on the main page.

[tutulfo]

Hey Tutulino,

Nice work on the upgrades since I last posted.

Quick question on something new that i've stumbled upon.

and looking at a rough glance should be possible to incorporate into your megaminer?

Nplusminer?

I wont link as i don't want to advertise other multi algo miners in your thread

What is nplusminer?

[nitrobg]

What is nplusminer?

Fork of NemosMiner with a smarter profit calculations:

Code:

Uses calculations based on 24hractual and currentestimate ahashpool prices to get more realistic estimate.
  Includes some trust index based on past 1hr currentestimate variation from 24hr.
  AND is NOT sensible to spikes.
  This shows less switching than following Current Estimate and more switching that following the 24hr Actual.
  Better profitability.

AFAIK NemosMiner also recently has added this.