stolarzz
Newbie
Offline
Activity: 111
Merit: 0
|
|
August 25, 2017, 03:55:28 PM |
|
yes driver work but 200w plus in 5 rx 470 rig.. too much i'm wainting for a new release
Just modify your bios, these drivers need a little bit tweaking but it works great
|
|
|
|
Dangerous_Mind
Newbie
Offline
Activity: 29
Merit: 0
|
|
August 25, 2017, 05:41:02 PM |
|
yes driver work but 200w plus in 5 rx 470 rig.. too much i'm wainting for a new release
Just modify your bios, these drivers need a little bit tweaking but it works great I had some problems with bad shares after the upgrade and had to increase the voltage to get rid of it in one GPU. But didn't see a big wattage increase. Probably you'll have to tune the GPU up again. But there is a Beta version from AMD already fixing this. Use the AMD clean up utility before installing new beta version.
|
|
|
|
zhelezo
|
|
August 25, 2017, 05:55:28 PM |
|
fucking unstable robinhood driver -.-
amd Blockchain also unstable on Win10. I got the best stably only on Win7.
|
|
|
|
Warlockmng
Member
Offline
Activity: 93
Merit: 10
|
|
August 25, 2017, 06:40:35 PM |
|
I'm testing the beta drivers, my Radeon RX470 mining edition goes from 24mhs to 28mhs with AF beta but when I add more than 1 card all of them drop to 24.58 mhs.
How can I fix this problem?
Thanks.
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
August 25, 2017, 07:05:49 PM |
|
I'm testing the beta drivers, my Radeon RX470 mining edition goes from 24mhs to 28mhs with AF beta but when I add more than 1 card all of them drop to 24.58 mhs.
How can I fix this problem?
Thanks.
That seems a psu problem.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
Warlockmng
Member
Offline
Activity: 93
Merit: 10
|
|
August 25, 2017, 07:37:15 PM |
|
I'm testing the beta drivers, my Radeon RX470 mining edition goes from 24mhs to 28mhs with AF beta but when I add more than 1 card all of them drop to 24.58 mhs.
How can I fix this problem?
Thanks.
That seems a psu problem. Even with 2 cards? My hardware is: Asus z270p Intel Celeron G3930 8GB Ram SSD 120GB Evga 1000w G2 I have another Rig with the same PSU running 6x RX480 at 27.9 mhs (dual)
|
|
|
|
doktor83
|
|
August 25, 2017, 07:58:48 PM |
|
i like reading everyone complaining how these drivers don't work for them, and there are my rigs hashing at full speed with these drivers for about 3 weeks now.
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
August 25, 2017, 09:01:05 PM |
|
Even with 2 cards?
My hardware is:
Asus z270p Intel Celeron G3930 8GB Ram SSD 120GB Evga 1000w G2
I have another Rig with the same PSU running 6x RX480 at 27.9 mhs (dual)
I guess you did not understand what I said, psu means power so take a look at the voltage first if the voltage of card 1 same as card 2 then whatthehell if not then whatnoobami? that will give you some experience troubleshooting it.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
stolarzz
Newbie
Offline
Activity: 111
Merit: 0
|
|
August 25, 2017, 09:06:42 PM |
|
I'm testing the beta drivers, my Radeon RX470 mining edition goes from 24mhs to 28mhs with AF beta but when I add more than 1 card all of them drop to 24.58 mhs.
How can I fix this problem?
Thanks.
It's becouse MSI Afterburner can't hold the clocks with AMD blockchain drivers. Everytime when you change it apply just for one card, other ones always working at stock settings. You have to set voltage and clocks in BIOS.
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
August 25, 2017, 09:25:15 PM |
|
you have to set voltage and clocks in BIOS.
Even if you set at bios, there are always one or more cards that will be auto set with a higher than set voltage at bios, now who knows why it happens, is bullshit. I mean go set 950, it will come as 1022, go set as 900, it will come as 980 so who knows, most of the time it comes right though, all these blockchain drivers are buggy. Also if you set with a low voltage thinking it will come with a higher voltage then the cards will crash at start. So there is no hope for this driver yet.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
yoonline
Newbie
Offline
Activity: 51
Merit: 0
|
|
August 25, 2017, 09:43:06 PM |
|
fucking unstable robinhood driver -.-
amd Blockchain also unstable on Win10. I got the best stably only on Win7. im on win 7 and i have full control of mem and core clock with full control of downvolt, with old drivers my rigs work like a charm but with robin drivers sometimes are stable sometimes very unstable with weird behavior sometimes make a lot of incorrect shares
|
|
|
|
P00P135
|
|
August 25, 2017, 11:01:00 PM |
|
Even with 2 cards?
My hardware is:
Asus z270p Intel Celeron G3930 8GB Ram SSD 120GB Evga 1000w G2
I have another Rig with the same PSU running 6x RX480 at 27.9 mhs (dual)
I guess you did not understand what I said, psu means power so take a look at the voltage first if the voltage of card 1 same as card 2 then whatthehell if not then whatnoobami? that will give you some experience troubleshooting it. Its not that he didnt understand you, its that you don't understand you. PSU = Power Supply Unit
|
|
|
|
zhelezo
|
|
August 26, 2017, 11:17:49 AM |
|
have full control of mem and core clock with full control of downvolt
this is the cause of instability. Try changing BIOS firmware directly.
|
|
|
|
borderline
|
|
August 26, 2017, 11:26:09 AM |
|
yes driver work but 200w plus in 5 rx 470 rig.. too much i'm wainting for a new release
Just modify your bios, these drivers need a little bit tweaking but it works great can you explain me of to set bios valuee.. i know atiflash polaris etc. no problem. my problem is if i have -mvcc -gmcc 870 in claymore what is the equal value to se in bios?
|
|
|
|
Tuner77
Member
Offline
Activity: 112
Merit: 10
|
|
August 27, 2017, 01:13:22 AM |
|
Can someone just post a clear How To for undervolting a 5xx card with these drivers in Win 10?
I can get them undervolted in Wattman but one reboot and its lost. Need bios undervolt instructions or some clear method. I read one guy was successful with Aug 11 drivers and Trixx.
|
|
|
|
dgozalie
Newbie
Offline
Activity: 3
Merit: 0
|
|
August 27, 2017, 02:02:51 AM |
|
just undervolt it with bios mod.. so it is permanent regardless the driver...
|
|
|
|
doktor83
|
|
August 27, 2017, 07:59:17 AM |
|
Can someone just post a clear How To for undervolting a 5xx card with these drivers in Win 10?
I can get them undervolted in Wattman but one reboot and its lost. Need bios undervolt instructions or some clear method. I read one guy was successful with Aug 11 drivers and Trixx.
there is no universal fix for this, something that works with one card, may not work with an other. So if you read this thread from page 1, and try out everything that is written, i am sure you will succeed in undervolting with these blockchain fix drivers.
|
|
|
|
Mattthev
|
|
August 27, 2017, 08:36:39 AM |
|
Can someone just post a clear How To for undervolting a 5xx card with these drivers in Win 10?
I can get them undervolted in Wattman but one reboot and its lost. Need bios undervolt instructions or some clear method. I read one guy was successful with Aug 11 drivers and Trixx.
I wrote about undervolting in my guide, it's really just basic, but it will give you better power consumption.
|
|
|
|
CrayjeksAjek
|
|
August 27, 2017, 10:05:56 PM |
|
What mods are you running and what cards? Ive never been able to clock that high with rx 480 8gb's 2 XFX hard swaps 1 XFX Ref 1 Powercolor Ref I think 1750 straps in 2000 slot. -96mV 2125 mem 1150 core
|
|
|
|
|
|