marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 03:31:11 PM |
|
Кoлeгa, имaм 2 пpeцaкaни xaш мoдyлa oт Aвaлoн. Eдиния гo paзвaлиx aз, нo чипoвeтe ca OК (нaдявaм ce). Дpyгия нe paбoтeшe oт кaктo пoлyчиx мaшинaтa. Aкo ти ги пpaтя, щe мoжeш ли дa ги cвaлиш oт плaткитe и дa ги мoнтиpaш нa eднa oт твoитe ?
Имa тyк във фopyмa кoлeгa oт швeция , кoйтo пpaви aвaлoн клoнинги, щe ти e пo eвтинo c нeгo дa ce cвъpжeш cпopeд мeн
|
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 03:32:44 PM Last edit: August 28, 2013, 04:11:23 PM by marto74 |
|
Interesting news. Im not sure if i already got the answer so i have some questions. Sorry if i asked already.
What will be the lead time from the point you get the chips and you ship the ready made miner out?
Is overvolting and change of MHz possible through software?
Can they be chained or do all need their own usb cable?
The first batch PCB will be here in 2.5 weeks. All the components are reserved or delivered. For up to 1000 boards We'll need a week to populate and test. Both overvolting and MHz change are through software. The board have CAN chaining , so just a jumper on the first and last board to close the current circle
|
|
|
|
mitak64
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 04:05:12 PM |
|
Кoлeгa, имaм 2 пpeцaкaни xaш мoдyлa oт Aвaлoн. Eдиния гo paзвaлиx aз, нo чипoвeтe ca OК (нaдявaм ce). Дpyгия нe paбoтeшe oт кaктo пoлyчиx мaшинaтa. Aкo ти ги пpaтя, щe мoжeш ли дa ги cвaлиш oт плaткитe и дa ги мoнтиpaш нa eднa oт твoитe ?
Имa тyк във фopyмa кoлeгa oт швeция , кoйтo пpaви aвaлoн клoнинги, щe ти e пo eвтинo c нeгo дa ce cвъpжeш cпopeд мeн cтpoмбoм нaли ? гoвopиx ce нeгo вeчe, нe eмнoгo eнтycиaзиpaн, иcкa aз caм дa cи cвaля чипoвeтe ... кaкъвтo cъм мaйcтop ... Кaжи cи цeнaтa, яcнo e чe щe тpябвa дa плaтя oтгope.
|
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 04:07:23 PM |
|
Кoлeгa, имaм 2 пpeцaкaни xaш мoдyлa oт Aвaлoн. Eдиния гo paзвaлиx aз, нo чипoвeтe ca OК (нaдявaм ce). Дpyгия нe paбoтeшe oт кaктo пoлyчиx мaшинaтa. Aкo ти ги пpaтя, щe мoжeш ли дa ги cвaлиш oт плaткитe и дa ги мoнтиpaш нa eднa oт твoитe ?
Имa тyк във фopyмa кoлeгa oт швeция , кoйтo пpaви aвaлoн клoнинги, щe ти e пo eвтинo c нeгo дa ce cвъpжeш cпopeд мeн cтpoмбoм нaли ? гoвopиx ce нeгo вeчe, нe eмнoгo eнтycиaзиpaн, иcкa aз caм дa cи cвaля чипoвeтe ... кaкъвтo cъм мaйcтop ... Кaжи cи цeнaтa, яcнo e чe щe тpябвa дa плaтя oтгope. Haй-paнo cлeд 15-ти щe мoгa , зa цeнaтa мaxaнeтo щe ти cтpyвa oкoлo 5 лв нa чип Пoздpaви
|
|
|
|
dnaleor
Legendary
Offline
Activity: 1470
Merit: 1000
Want privacy? Use Monero!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 09:29:04 PM |
|
After populating the new double power suply design of HEX 16 in Friday, We started testing and the board is working @450 MHz .
As far the PCB design is now tested and any changes would be only software ( firmware) We are going to place bare PCB order in Friday.
Do you mean 4500 MHz? At what time on friday? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
2GOOD
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 11:06:28 PM |
|
After populating the new double power suply design of HEX 16 in Friday, We started testing and the board is working @450 MHz .
As far the PCB design is now tested and any changes would be only software ( firmware) We are going to place bare PCB order in Friday.
Do you mean 4500 MHz? At what time on friday? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) It is 450MHz per chip !!!
|
|
|
|
dnaleor
Legendary
Offline
Activity: 1470
Merit: 1000
Want privacy? Use Monero!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 28, 2013, 11:10:35 PM |
|
450 per chips? ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) That's impressive!!!! So 7.2 Ghash? ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 07:37:15 AM |
|
After populating the new double power suply design of HEX 16 in Friday, We started testing and the board is working @450 MHz .
As far the PCB design is now tested and any changes would be only software ( firmware) We are going to place bare PCB order in Friday.
Do you mean 4500 MHz? At what time on friday? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) The PCB order will be submitted until Friday 14:00 EET (+2) in order to be in production since next monday
|
|
|
|
Min€r
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 07:58:32 AM |
|
After populating the new double power suply design of HEX 16 in Friday, We started testing and the board is working @450 MHz .
As far the PCB design is now tested and any changes would be only software ( firmware) We are going to place bare PCB order in Friday.
Do you mean 4500 MHz? At what time on friday? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) The PCB order will be submitted until Friday 14:00 EET (+2) in order to be in production since next monday You haven`t read the whole shit from Yifu yet? I don`t think that chips will come finally - please look that you can get a refund ASAP! As ASICMiner Blades 10GH cost now 3.5BTC all your/our hardware got burned overnight. Please have a look at this: https://bitcointalk.org/index.php?topic=269950.msg3032534#msg3032534Now he refunds people BTC what are mined with our chips - I think this asshole will have a dangerous life soon.
|
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 08:06:24 AM |
|
After populating the new double power suply design of HEX 16 in Friday, We started testing and the board is working @450 MHz .
As far the PCB design is now tested and any changes would be only software ( firmware) We are going to place bare PCB order in Friday.
Do you mean 4500 MHz? At what time on friday? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) The PCB order will be submitted until Friday 14:00 EET (+2) in order to be in production since next monday You haven`t read the whole shit from Yifu yet? I don`t think that chips will come finally - please look that you can get a refund ASAP! As ASICMiner Blades 10GH cost now 3.5BTC all your/our hardware got burned overnight. Please have a look at this: https://bitcointalk.org/index.php?topic=269950.msg3032534#msg3032534Now he refunds people BTC what are mined with our chips - I think this asshole will have a dangerous life soon. I did read this. Any way we are ready with the tests of the boards. We purchased components and also there are 2500 chips here, so We are starting our first batch in order to be ready. If any body have doubts , then just do not order . The service will work for those that want to have avalon based miner, others are not going to order. In the case of the customer with chips on hand OUR pricing is still better than equal to ASICminer blades.
|
|
|
|
Min€r
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 08:09:36 AM |
|
After populating the new double power suply design of HEX 16 in Friday, We started testing and the board is working @450 MHz .
As far the PCB design is now tested and any changes would be only software ( firmware) We are going to place bare PCB order in Friday.
Do you mean 4500 MHz? At what time on friday? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) The PCB order will be submitted until Friday 14:00 EET (+2) in order to be in production since next monday You haven`t read the whole shit from Yifu yet? I don`t think that chips will come finally - please look that you can get a refund ASAP! As ASICMiner Blades 10GH cost now 3.5BTC all your/our hardware got burned overnight. Please have a look at this: https://bitcointalk.org/index.php?topic=269950.msg3032534#msg3032534Now he refunds people BTC what are mined with our chips - I think this asshole will have a dangerous life soon. I did read this. Any way we are ready with the tests of the boards. We purchased components and also there are 2500 chips here, so We are starting our first batch in order to be ready. If any body have doubts , then just do not order . The service will work for those that want to have avalon based miner, others are not going to order. In the case of the customer with chips on hand OUR pricing is still better than equal to ASICminer blades. Ohhhh sorry didn`t mean it bad & don`t know you have 2.5k chips. Are this chips send in via clients or is your groupbuy arrived?
|
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 08:12:05 AM |
|
After populating the new double power suply design of HEX 16 in Friday, We started testing and the board is working @450 MHz .
As far the PCB design is now tested and any changes would be only software ( firmware) We are going to place bare PCB order in Friday.
Do you mean 4500 MHz? At what time on friday? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) The PCB order will be submitted until Friday 14:00 EET (+2) in order to be in production since next monday You haven`t read the whole shit from Yifu yet? I don`t think that chips will come finally - please look that you can get a refund ASAP! As ASICMiner Blades 10GH cost now 3.5BTC all your/our hardware got burned overnight. Please have a look at this: https://bitcointalk.org/index.php?topic=269950.msg3032534#msg3032534Now he refunds people BTC what are mined with our chips - I think this asshole will have a dangerous life soon. I did read this. Any way we are ready with the tests of the boards. We purchased components and also there are 2500 chips here, so We are starting our first batch in order to be ready. If any body have doubts , then just do not order . The service will work for those that want to have avalon based miner, others are not going to order. In the case of the customer with chips on hand OUR pricing is still better than equal to ASICminer blades. Ohhhh sorry didn`t mean it bad & don`t know you have 2.5k chips. Are this chips send in via clients or is your groupbuy arrived? Zefir first batch and some delivered by the customer
|
|
|
|
demzie
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 08:24:22 AM |
|
The 2500 chips, for what orders are those martin? Do you have order numbers?
|
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 09:00:06 AM |
|
The 2500 chips, for what orders are those martin? Do you have order numbers?
This is N 69 But this is irrelevant as far the chips are from other group bye
|
|
|
|
demzie
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 09:02:58 AM |
|
Oh to bad, thought you had an own order at zephir ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 29, 2013, 09:07:14 AM |
|
Oh to bad, thought you had an own order at zephir ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I have , but only 40-50 received.
|
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 30, 2013, 05:49:21 PM |
|
Order to the PCB house confirmed. Now let's hope for the best
|
|
|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 01, 2013, 01:18:56 AM |
|
Marto, how about some leak for new HEX16 pcb design picture ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
nemercry
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 339
Merit: 250
Vice versa is not a meal.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 02, 2013, 04:39:15 PM |
|
Hello marto74,
i sent you a mail regarding chips which will probably be sent on on wednesday. I just want you confirmation, that if i dont refund them and let them ship to your location, that you can put them together in a short time. If so i would start to set the Order immediatly and pay for it. If you think there will be a big delay (more than one week after receiving the chips ?), i need to think about a refund. (I dont hope so).
Regards
|
|
|
|
marto74 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 02, 2013, 09:01:52 PM |
|
Hello marto74,
i sent you a mail regarding chips which will probably be sent on on wednesday. I just want you confirmation, that if i dont refund them and let them ship to your location, that you can put them together in a short time. If so i would start to set the Order immediatly and pay for it. If you think there will be a big delay (more than one week after receiving the chips ?), i need to think about a refund. (I dont hope so).
Regards
The PCB's will be here in 2.5 weeks, week after that You'll have your miner boards assembled and tested Regards: Martin
|
|
|
|
|