[ANN] ColossusXT (COLX) Private| Sustainable| Grid Computing - Mandatory Update

[binhvu4571]

Guys am i the only one who realize that COLX github repository is inactive for 3-4 months?   Theres not a single activity at all. Can anybody explain me? maybe i am in the wrong git?

Link: https://github.com/colossuscoin/ColossusCoinXT/commits/master

what's worse, If you diff PIVX and COLX codes, the only difference is a masssive PIVX -> COLX replaceAll and... block time? :S

Yea u r right.. just a clone.

[guillzini]

I was wondering, I'm a freelance designer and After Effects editor. Can I join the team for some marketing purposes?

- Is there any official slack or discord ?

- Why stacking is not working ?

Thanks a lot

There's an official Telegram group: https://t.me/colossuscoin

Before you can start staking, your coins have to mature in the wallet for 7 days.
I'm told this will be changed to 8 hours after the next wallet update though..

[guillzini]

I can not transfer the coins from tradesatoshi to the desktop wallet, is stopped by 4 days

I just sent my coins from trade satoshi to the desktop wallet. It literally took 2 minutes to get to my wallet.

Are you sure you confirmed the withdrawal with the email trade satoshi sends you? If you don't do that, the withdrawal won't go through.
If you did, you can check the TxID and see the status. Also, make sure your wallet is fully synced with the blockchain.

Good luck!

[Daper]

Is there an Andriod wallet available for COLX or maybe a reputable online cold storage? Can someone please refer me to a good wallet place? Not the desktop versions.

[pete898]

For sure this is a top 100 currency. I am just a bit worried about the 10COLX fixed transaction fee. Won't it bee too high as soon as COLX reach higer values?

Is it fixed at 10 COLX..?  Where did you see that...?

Official website:
"Transaction Fee
10 COLX Coin Fee on transactions"

https://colossuscoinxt.org/

I don't think that's correct as I have fees of differing amounts...

-3.73000000
-11.78011789
-2.26002260
-8.15008150
-65.67065670
-3.73003730
-5.20005200

See, all completely different, and not one for 10.

So maybe support will be able to answer your question more definitively than me... and if you get the answer please come back here and share it...

Discord - https://discord.gg/JfYkgB

Telegram - https://t.me/colossuscoin

Many thanks...

If you look in the wallet it says the default fee is - Recommended 10.00010000 COLX/Kb Estimated to begin confirmation with 25 blocks. - So it's listed there as COLX/Kb.

So that will probably explain why all mine have been different as I just left it set on that default option... but as you can see 5 out of 7 of them were under 10 COLX so this option must vary by how many Kb the transaction actually uses.


Or, further down under custom, there is the option to pay the minimum of 10 COLX

So yes it looks like you are right and it is currently 10 COLX minimum...  which at the current rate is just over 9 cents... $0.09417

So yes a valid point, as the price goes up, so will the fees... but maybe the devs have already got a plan devised to cover this... Again if you ask them and then let us know that would be great...

[pete898]

Is there an Andriod wallet available for COLX or maybe a reputable online cold storage? Can someone please refer me to a good wallet place? Not the desktop versions.

Sorry, none are currently available... but you can leave them on the exchange where you purchased them if you are adverse to the desktop versions.

Mobile Apps are on the 'map' for 2018 and the devs are working on them but I couldn't say exactly when they will become available, hopefully during Q1.

[Daper]

Sorry, none are currently available... but you can leave them on the exchange where you purchased them if you are adverse to the desktop versions.

Mobile Apps are on the 'map' for 2018 and the devs are working on them but I couldn't say exactly when they will become available, hopefully during Q1.

OK, Thanks for providing the update.

[pete898]

Sorry, none are currently available... but you can leave them on the exchange where you purchased them if you are adverse to the desktop versions.

Mobile Apps are on the 'map' for 2018 and the devs are working on them but I couldn't say exactly when they will become available, hopefully during Q1.

OK, Thanks for providing the update.

It's my pleasure... and here's the 'map' - To The Moon!   

[lemao17]

Any plans to be added on CoinExchange? Hyped coins have good pumps there

[molecularman]

Hello guys,

I have the latest wallet, encrypted my wallet, then reboot the wallet, unlocked but it's not staking, even after a reboot.

Anyone can help me please ?

Thanks a lot !

Make sure you have  'staking=1'  in your config file.      After you do that,  restart the wallet.    Coins currently take 7 days to mature before it will begin to stake.

[freak1]

Is there a way to see if the wallet is actually ready to stalk? I just set it up so i'm in the 7 days wait. But is there a way to make sure everything is setup right?

[pete898]

Is there a way to see if the wallet is actually ready to stalk? I just set it up so i'm in the 7 days wait. But is there a way to make sure everything is setup right?

Go to the top menu... then 'Tools'... then 'Debug Console'... that pops-up the debug window...

Then in the input box at the bottom of the window enter - getstakingstatus

The outputs should be all 'True' when it's actually staking... and 'Falses' need looking into...  (y)

 [Apart from 'mintablecoins' will probably be 'False' until after the seven days is up..? I never checked when I first set mine up. And obviously 'staking status' will be false till it is actually staking.]

    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : true,
    "enoughcoins" : true,
    "mnsync" : true,
    "staking status" : true


If in the bottom of the window you enter: help

...that gives you a full list of all the available commands which is useful too...

[majestymage]

the spike this coin has made me investigate this a little. still undecided if it is a shitcoin or a great coin. lets see how it goes in the next months 

[pete898]

the spike this coin has made me investigate this a little. still undecided if it is a shitcoin or a great coin. lets see how it goes in the next months 

It's due another spike shortly me thinks...   

[pete898]

the spike this coin has made me investigate this a little. still undecided if it is a shitcoin or a great coin. lets see how it goes in the next months  

It's due another spike shortly me thinks...    

Here's my projection... and it'll be very interesting to see if I'm right... or not...  (y)


And, as you can see from the graph below, as I've been saying all along; COLX is definitely pump, pump, pump... with absolutely zero dump... you'd have to be crazy not to buy and hold onto this one...  (y)

[mattman3333]

Is there a way to see if the wallet is actually ready to stalk? I just set it up so i'm in the 7 days wait. But is there a way to make sure everything is setup right?

Go to the top menu... then 'Tools'... then 'Debug Console'... that pops-up the debug window...

Then in the input box at the bottom of the window enter - getstakingstatus

The outputs should be all 'True' when it's actually staking... and 'Falses' need looking into...  (y)

 [Apart from 'mintablecoins' will probably be 'False' until after the seven days is up..? I never checked when I first set mine up. And obviously 'staking status' will be false till it is actually staking.]

    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : true,
    "enoughcoins" : true,
    "mnsync" : true,
    "staking status" : true


If in the bottom of the window you enter: help

...that gives you a full list of all the available commands which is useful too...

I am getting



{
    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : false,
    "enoughcoins" : true,
    "mnsync" : true,
    "staking status" : false
}


What should I do, ive had my coins in my wallet for about 3 days now

[pete898]

Is there a way to see if the wallet is actually ready to stalk? I just set it up so i'm in the 7 days wait. But is there a way to make sure everything is setup right?

Go to the top menu... then 'Tools'... then 'Debug Console'... that pops-up the debug window...

Then in the input box at the bottom of the window enter - getstakingstatus

The outputs should be all 'True' when it's actually staking... and 'Falses' need looking into...  (y)

 [Apart from 'mintablecoins' will probably be 'False' until after the seven days is up..? I never checked when I first set mine up. And obviously 'staking status' will be false till it is actually staking.]

    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : true,
    "enoughcoins" : true,
    "mnsync" : true,
    "staking status" : true


If in the bottom of the window you enter: help

...that gives you a full list of all the available commands which is useful too...

I am getting



{
    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : false,
    "enoughcoins" : true,
    "mnsync" : true,
    "staking status" : false
}


What should I do, ive had my coins in my wallet for about 3 days now

Thanks, and yes that's fine... I just added another note on the original post and that's just confirmed I was correct in my assumptions...


 [Apart from 'mintablecoins' will probably be 'False' until after the seven days is up..? I never checked when I first set mine up. And obviously 'staking status' will be false till it is actually staking.]


So you've just got to wait for the next 4 days now, to make the 7 in total, and off it should go...  (y)


Good Luck! ...and Happy Staking...

[mattman3333]

Is there a way to see if the wallet is actually ready to stalk? I just set it up so i'm in the 7 days wait. But is there a way to make sure everything is setup right?

Go to the top menu... then 'Tools'... then 'Debug Console'... that pops-up the debug window...

Then in the input box at the bottom of the window enter - getstakingstatus

The outputs should be all 'True' when it's actually staking... and 'Falses' need looking into...  (y)

 [Apart from 'mintablecoins' will probably be 'False' until after the seven days is up..? I never checked when I first set mine up. And obviously 'staking status' will be false till it is actually staking.]

    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : true,
    "enoughcoins" : true,
    "mnsync" : true,
    "staking status" : true


If in the bottom of the window you enter: help

...that gives you a full list of all the available commands which is useful too...

I am getting



{
    "validtime" : true,
    "haveconnections" : true,
    "walletunlocked" : true,
    "mintablecoins" : false,
    "enoughcoins" : true,
    "mnsync" : true,
    "staking status" : false
}


What should I do, ive had my coins in my wallet for about 3 days now

Thanks, and yes that's fine... I just added another note on the original post and that's just confirmed I was correct in my assumptions...


 [Apart from 'mintablecoins' will probably be 'False' until after the seven days is up..? I never checked when I first set mine up. And obviously 'staking status' will be false till it is actually staking.]


So you've just got to wait for the next 4 days to make the 7 in total and off it should go...  (y)


Good Luck! ...and Happy Staking...

Thank you sir, looking forward to the future of this coin.. hopefully the next verge and better!

[pete898]

Thank you sir, looking forward to the future of this coin.. hopefully the next verge and better!

My pleasure... and yes most definitely!!    (y)

[pete898]