[ANN] [KMC] Kripto Marka Coin

[loatchoat]

Is it safe when I deposit now? already confirmed at wallet but don't see balance on exchange. 

it is not safe!!! dont make deposits, we still testing

Can u turn on Discord now ?

[1524291577]

1524291577

[redsun17]

I suggest everyone do not deposit to the stocks.exchange until the coin is officially announced as listed.  This is true of any and every coin.  They must still be testing the wallet if they have not listed it on exchange, so why would you want to risk sending to a wallet that may still have bugs?

I know many want to sell, but just a little more patience and you'll get your chance.  I'm excited to see what prices look like before and after the actual launch of the first CryptoNote masternode.  I expect they will be lower until that happens because people will be unsure whether masternode will actually happen, and then if the dev pulls it off, it will spike sharply.

[phantom369]

Transaction hash: 3532B262779318229E0DB47CD0C387ECC0051428BB15016E24EB16D3F4F79861 generally standing still, one did not confirm,it is possible to fix it or refund the transaction ? 

[tr4nscr1pt]

Transaction hash: 3532B262779318229E0DB47CD0C387ECC0051428BB15016E24EB16D3F4F79861 generally standing still, one did not confirm,it is possible to fix it or refund the transaction ? 

http://explorer.kmcoin.info/en/?hash=3532B262779318229E0DB47CD0C387ECC0051428BB15016E24EB16D3F4F79861#blockchain_transaction

because you used mixincount 3 on your wallet (level 3) transaction will be confirmed but needs time

[phantom369]

Transaction hash: 3532B262779318229E0DB47CD0C387ECC0051428BB15016E24EB16D3F4F79861 generally standing still, one did not confirm,it is possible to fix it or refund the transaction ? 

http://explorer.kmcoin.info/en/?hash=3532B262779318229E0DB47CD0C387ECC0051428BB15016E24EB16D3F4F79861#blockchain_transaction

because you used mixincount 3 on your wallet (level 3) transaction will be confirmed but needs time

A1EA12E457ABE4B78B18C577A63F24DE089BC45722C0BA82CB3908852391299F But this transaction? confirmed but the amount is not arrived at the destination.Something you can fix?

[drups]

no transaction for 4 hours

Transaction hash: 6F7118536A20BBCFC7C883700CE3507CE77CD36A978A5B892ED2BBBAC813F2B4
Transaction hash: 859E586B300DC75904E8BF2C621E6B618D834C896B6ECFA127554D241C819CA9

[bilibord]

New mining pool : http://kmc-pool.ddns.net/

Works with static diff. Just add it at the end of your address <address>.<diff>

i like that, very success for the project.

[drups]

Transaction hash: 6F7118536A20BBCFC7C883700CE3507CE77CD36A978A5B892ED2BBBAC813F2B4 - this transaction has not been confirmed. the purse is hanging with a question mark. can something to fix it?
Transaction hash: 859E586B300DC75904E8BF2C621E6B618D834C896B6ECFA127554D241C819CA9 - this transaction confirmed but the amount is not received at the destination. can something to fix it?

[tr4nscr1pt]

Please leave your node (kmcoind) allways running, that will speed up network and it is not taking your resources!

And when you send from your Gui wallet use level 0 to speed up.

[niG1y]

Hi there, can you give me a hand plz. Having such a trouble: starting forked ccminer (downloaded from link on pool http://pool.kmcoin.info configuration for bat took there too) and getting an error such as: [2017-12-01 02:00:43] GPU #1: FATAL: failed to allocate device memory for long state.
What's the matter, can't get.
For sure and nor simple questions:
bat:
ccminer -o stratum+tcp://pool.kmcoin.info:3333 -u KsxumUjhaa86693NRnBixo64zjfkfQzFeiJJS1ALaKFSan6sUTQF2XU5hAumthSH7z3avjM1EQkacVA Nnfi2iSTQLXem4zi -p x
pause //to see the problem

[tr4nscr1pt]

What GPU are you using??

[niG1y]

What GPU are you using??

having 2 - 1080 and 2 - 1070 on one rig

[tr4nscr1pt]

Config file looks fine. Please try minergate gui miner for beggining

view other pools, add new pool pool.kmcoin.info:3333 and your wallet address

[BluRixX]

Hi there, can you give me a hand plz. Having such a trouble: starting forked ccminer (downloaded from link on pool http://pool.kmcoin.info configuration for bat took there too) and getting an error such as: [2017-12-01 02:00:43] GPU #1: FATAL: failed to allocate device memory for long state.
What's the matter, can't get.
For sure and nor simple questions:
bat:
ccminer -o stratum+tcp://pool.kmcoin.info:3333 -u KsxumUjhaa86693NRnBixo64zjfkfQzFeiJJS1ALaKFSan6sUTQF2XU5hAumthSH7z3avjM1EQkacVA Nnfi2iSTQLXem4zi -p x
pause //to see the problem

Make sure to have at least 20 GB allocated for pagefile/swap.

And use latest Klaust's ccminer for cryptonight:
https://github.com/KlausT/ccminer-cryptonight/releases

[niG1y]

have tried xmr-stak-nvidia, seems to be working, thx
pool shows 1.8-1.9 kh/sec, is it ok? can't understand cause miner doesn't show values and i haven't mined cryptonight before, so don't know correct numbers for sure.
and such an interesting thing about temperature, only 48-50C on cards, interesting.
and my last question if you can help: this algo as i understand needs cpu, so it doesn't need memory and i can reduce it as possible?

[BluRixX]

have tried xmr-stak-nvidia, seems to be working, thx
pool shows 1.8-1.9 kh/sec, is it ok? can't understand cause miner doesn't show values and i haven't mined cryptonight before, so don't know correct numbers for sure.
and such an interesting thing about temperature, only 48-50C on cards, interesting.
and my last question if you can help: this algo as i understand needs cpu, so it doesn't need memory and i can reduce it as possible?

Check your miner not the pool but 1.8/1.9 Kh/s is very low, i do more than that with 4 x 1060s (550 h/s per card)

Yes low temp are normal, that's the good thing about cryptonight.

This algo is minable with a cpu yes, but when mining with gpu it uses memory, my settings are:  Gpu -20 Memory +800 and temps are still mid 50C.

Good luck !

[niG1y]

have tried xmr-stak-nvidia, seems to be working, thx
pool shows 1.8-1.9 kh/sec, is it ok? can't understand cause miner doesn't show values and i haven't mined cryptonight before, so don't know correct numbers for sure.
and such an interesting thing about temperature, only 48-50C on cards, interesting.
and my last question if you can help: this algo as i understand needs cpu, so it doesn't need memory and i can reduce it as possible?

1.8/1.9 Kh/s is very low, i do more than that with 4 x 1060s (550 h/s per card)

Yes low temp are normal, that's the good thing about cryptonight.

This algo is minable with a cpu yes, but when mining with gpu it uses memory, my settings are:  Gpu -20 Memory +800 and temps are still mid 50C.

Good luck !

Man, thx a lot! Now everything seems to be working fine. Getting almost 2500 h/s on miner shows 2400 on pool. Great, thx.
The only thing 1080 seems to be so bad on this algo, getting 560 on it and 690 on 1070, but it's only my fault that i've bought it (;
Will try managing configuration.
Thanks a lot!

[BluRixX]

have tried xmr-stak-nvidia, seems to be working, thx
pool shows 1.8-1.9 kh/sec, is it ok? can't understand cause miner doesn't show values and i haven't mined cryptonight before, so don't know correct numbers for sure.
and such an interesting thing about temperature, only 48-50C on cards, interesting.
and my last question if you can help: this algo as i understand needs cpu, so it doesn't need memory and i can reduce it as possible?

1.8/1.9 Kh/s is very low, i do more than that with 4 x 1060s (550 h/s per card)

Yes low temp are normal, that's the good thing about cryptonight.

This algo is minable with a cpu yes, but when mining with gpu it uses memory, my settings are:  Gpu -20 Memory +800 and temps are still mid 50C.

Good luck !

Man, thx a lot! Now everything seems to be working fine. Getting almost 2500 h/s on miner shows 2400 on pool. Great, thx.
The only thing 1080 seems to be so bad on this algo, getting 560 on it and 690 on 1070, but it's only my fault that i've bought it (;
Will try managing configuration.
Thanks a lot!

You're welcome! For the 1080 you should be still doing 10/15% more than the 1070, using latest nvidia drivers ?

[niG1y]

have tried xmr-stak-nvidia, seems to be working, thx
pool shows 1.8-1.9 kh/sec, is it ok? can't understand cause miner doesn't show values and i haven't mined cryptonight before, so don't know correct numbers for sure.
and such an interesting thing about temperature, only 48-50C on cards, interesting.
and my last question if you can help: this algo as i understand needs cpu, so it doesn't need memory and i can reduce it as possible?

1.8/1.9 Kh/s is very low, i do more than that with 4 x 1060s (550 h/s per card)

Yes low temp are normal, that's the good thing about cryptonight.

This algo is minable with a cpu yes, but when mining with gpu it uses memory, my settings are:  Gpu -20 Memory +800 and temps are still mid 50C.

Good luck !

Man, thx a lot! Now everything seems to be working fine. Getting almost 2500 h/s on miner shows 2400 on pool. Great, thx.
The only thing 1080 seems to be so bad on this algo, getting 560 on it and 690 on 1070, but it's only my fault that i've bought it (;
Will try managing configuration.
Thanks a lot!

You're welcome! For the 1080 you should be still doing 10/15% more than the 1070, using latest nvidia drivers ?

Yep, i even have just reinstalled it, cause was having some troubles. So installed new one 388.43 with deleting old ones

[Torin]

Man, thx a lot! Now everything seems to be working fine. Getting almost 2500 h/s on miner shows 2400 on pool. Great, thx.
The only thing 1080 seems to be so bad on this algo, getting 560 on it and 690 on 1070, but it's only my fault that i've bought it (;
Will try managing configuration.
Thanks a lot!

Hm..I think 2400 h\s to low for u rig.I have almost 3k\s from 1070x4.Use ccminer_cryptonight 206.And boost memory,not core.