mkxminer: Fast Lyra2Z/Lyra2rev2 miner for AMD GPU (ZCoin, GINcoin, VERT, MONA...

[pfft]

So guys anyone try on rx 580 8gb ? let me know i want to buy some of this cards.

[bubislav]

I get an error trying to mine Monacoin with this. I have 3 RX 580's.
It says The application was unable to start correctly (0xc0000007b). Click OK to close the application.

I managed to get in run on two rigs but other two rigs get the same error like you ?
The application was unable to start correctly (0xc0000007b). Click OK to close the application.

EDIT

I found solution ....
Runtimes
i installed AIO runtimes and now all works like a charm

[fapar]

What has changed in the new 201 version? Hashrate not increased?
I have a 480 and 270 cards remained at the same level.

[odus709]

Miner connects to stratum+tcp://vtc.suprnova.cc:5676 and mines okay but no unconfirmed balance after mining for 3 hours. Is this normal? I see estimated amount change. Something wrong?

[fapar]

Miner connects to stratum+tcp://vtc.suprnova.cc:5676 and mines okay but no unconfirmed balance after mining for 3 hours. Is this normal? I see estimated amount change. Something wrong?

Miner no relation to the pool (Suprnova) has not. Ask this question in a profile thread https://bitcointalk.org/index.php?topic=1163395.0
Enroll, do not worry.

[odus709]

Used this miner on Nova for Mona, shows progress and immature balance. Not on VTC, was my point. No transactions or earnings, I see miner connected and hash rate looks great!

[thahue]

hey guys, so i keep getting the 'disconnecting from stratum' message within the command prompt as well, and i'm stumped as to how to connect.

i switched my user and pass to my vtc.supranova's worker's ID, even tried switching it my vtc.supranova login, and still no luck, still the same disconnecting message repeatedly in the prompt.

have i not registered something properly on the pool site?

[bperryman]

Used this miner on Nova for Mona, shows progress and immature balance. Not on VTC, was my point. No transactions or earnings, I see miner connected and hash rate looks great!

The Network hashrate for VTC is (at time of writing) just over 1 TH. Suprnova's pool hashrate is 6,443 MH. The approximate time to find a block is 7h40m. Nothing will show up in your Unconfirmed Balance until the pool finds a block, so that might be why you haven't had any results after 3 hours. Only problem with new and/or small pools is that you wait a really long time for a reward, but the bonus is that as long as you keep mining you get a larger portion of that reward.

[kabarbogor]

great miner but only a little bit pool.

[Starker3]

Okay so I've managed to get it working, it seems that the --asm mode crashes the rig now and then when starting the miner. Sometimes it works, sometimes it doesn't. But when it works it works WELL!! I'me getting 38 MH/s with an MSI Gaming X 8GB RX 580 mining Monacoin on suprnova.

Thanks MKX for an amazing miner!!

[HolaHola90]

been testing out this miner for whole day on my rig.
I have 6x rx580 8gb gpus. (Ellesmere cards)
mining VTC at the moment at suprnova pool.

with --asm and -I 23 i am getting ~37mh/s not OC. But as readme said --asm on this type of GPU might crash lot and it does. Had like 10 BSODs.
without --asm i am getting ~32mh/s with -I 23.  Crashes less but still does. Havent figured out why.
without --asm and -I 20 it is running stable but i am only getting ~28mh/s.

Setting such as -- fan --engine gives BSOD  as soon as miner is trying to connect to pool.

not whining or anything just giving some feedback for maybe developer and other users.

[lae]

OpenCL requires AMDGPU-PRO and that AUR package has been orphaned.

You don't need the full set of amdgpu-pro drivers - I use the in kernel amdgpu driver with the following AUR package, which isn't orphaned:

Code:

aur/opencl-amd 17.40.492261-1 (34, 5.12)
    OpenCL userspace driver as provided in the amdgpu-pro driver stack. This package is intended to work along with the free
    amdgpu stack.

[pfft]

So guys it`s working good or not ?

[fonyo]

Please add support for the largest VTC pool: MPH!

[Kru420]

i use Version 2.0.1

mkxminer.exe -o stratum+tls://stak.suprnova.cc:7710 -u xxxxxx -p x -I 18~20    17 just fine 20~21Mh

it just crash GPUs, stuck reboot, my GPU RX580 4G X3, last week i use -I 20 with RX580 4G X 2 , it's fine, 28~31Mh,  
how to fix the problem?
thanks!!

[choff5507]

Am I right in assuming that the only reason this doesn't work with MPH for example is due to the dev fee? I.e. it's only setup for the pools which the dev has a setup to receive their dev fee to??

[SundanceKid2020]

I see this miner in bsod pool (Galactrum coin). How to..?

[oddity2505]

I see this miner in bsod pool (Galactrum coin). How to..?

Developer testing?

[SundanceKid2020]

I see this miner in bsod pool (Galactrum coin). How to..?

Developer testing?

There are 4 miners....

[winmkx]

Am I right in assuming that the only reason this doesn't work with MPH for example is due to the dev fee? I.e. it's only setup for the pools which the dev has a setup to receive their dev fee to??

I contacted MPH operator with questions regarding his TLS setup and user management about 3 days ago, still no reply.

But… I am working on a version that will work with ANY pools (including MPH). stratum+tcp and stratum+tls. Planning to release before Xmas…