[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9

[msallak1]

We’re pleased to release Bminer 14.3.0.

Improve the performance for Cuckatoo31.
Support 2080Ti for Cuckatoo31.
Reduce the CPU usages for Grin / Aeternity by default.
Reduce the likelihood of rejected shares for Cuckatoo31.

Please see https://www.bminer.me for more details.
Please see https://www.bminer.me/performances/ for performances of Bminer on mining different coins.

Happy mining!

Tested on 9x 1080ti

Hashrate seems fine, 1.3-1.2 per card, running 190w +100/+1000 OC

However there is a problem with rejected shares still

50% rejected shares on F2pool
100% rejected shares on GrinMint

Any suggestions?

I don't know why you having that much rejected.
I only mine with 1 gtx 1080 ti on win 7 pc and I am having [ 2566 accepted shares / 151 rejected shares ].

Edit: mining pool f2pool.
When I used spark pool I got like 33% rejected, and with grinmint most shares were rejected because of low share difficulty.

[Piarb]

I don't know why you having that much rejected.
I only mine with 1 gtx 1080 ti on win 7 pc and I am having [ 2566 accepted shares / 151 rejected shares ].

Edit: mining pool f2pool.
When I used spark pool I got like 33% rejected, and with grinmint most shares were rejected because of low share difficulty.

what about hashrate on win7?

[msallak1]

I don't know why you having that much rejected.
I only mine with 1 gtx 1080 ti on win 7 pc and I am having [ 2566 accepted shares / 151 rejected shares ].

Edit: mining pool f2pool.
When I used spark pool I got like 33% rejected, and with grinmint most shares were rejected because of low share difficulty.

what about hashrate on win7?

https://i.imgur.com/xLG1Uw7.png

hashrate 1.34
No over clocking, and power limit 95%

[integy]

HIVE
5x1080ti

I confirm rejected shares is high!
bminer-ver. 14.3.0
57.06%
A 190
R 143

[yuzuak]

We’re pleased to release Bminer 14.3.0.

Improve the performance for Cuckatoo31.
Support 2080Ti for Cuckatoo31.
Reduce the CPU usages for Grin / Aeternity by default.
Reduce the likelihood of rejected shares for Cuckatoo31.

Please see https://www.bminer.me for more details.
Please see https://www.bminer.me/performances/ for performances of Bminer on mining different coins.

Happy mining!

Can we hope that the C31 algorithm will be available for the GTX 1070? Are you working on this?
Gminer allows to connect, but it has a very low hash rate.

+1

[totikk]

HIVE
5x1080ti

I confirm rejected shares is high!
bminer-ver. 14.3.0
57.06%
A 190
R 143

HIVE
Bminer 14.3

2x1080ti  = 15-20% rejected

3x1080ti  = 28-35% rejected

Miner close and restarts randomly 30-90 minuts (on 14.2 too)
 

[Digital_Seytan]

Bminer shows the hasrate much lower on the web site of ethermine.org 6x 1060 6gb Reported Hashrate Bminer:143.5
Rig1 Reported Hashrate Pool: 22.3 MH / s Current Hashrate 148.1 MH / s

bminer config:

Code:

bminer.exe -no-timestamps -no-runtime-info -share-check 240 -uri ethash: //0xxxxxxxxxxxxxxxxxxxxxxxxxD.rig1@eu1.ethermine.org: 4444

Please help what can i do now

[r0ver2]

HIVE
Bminer 14.3

2x1080ti  = 15-20% rejected

3x1080ti  = 28-35% rejected

Miner close and restarts randomly 30-90 minuts (on 14.2 too)
 

Try another pool!

[JMDan]

Would it be possible to add an option to disable NVML hooking? I can't manage to run the miner on docker...

Failed to initialize the CUDA platform: CudaError: Could not initialize the NVML library

[bakermining76]

With v14.3, I'm getting 2.5gps (GRIN31) poolside using two 1080 Tis at +180/+600/85% on F2pool with 1.2% rejected  I found in the past that both sparkpool and grinmint had too high rejected shares, so haven't bothered with them. I did have pretty good luck with Luxor on Grin29 - near 0% rejects, which makes sense because my ping is ~55ms at Luxor compared to ~330ms on F2pool. I'm planning to go back to Luxor after my next F2pool payout.

[johny78]

With v14.3, I'm getting 2.5gps (GRIN31) poolside using two 1080 Tis at +180/+600/85% on F2pool with 1.2% rejected  I found in the past that both sparkpool and grinmint had too high rejected shares, so haven't bothered with them. I did have pretty good luck with Luxor on Grin29 - near 0% rejects, which makes sense because my ping is ~55ms at Luxor compared to ~330ms on F2pool. I'm planning to go back to Luxor after my next F2pool payout.

Hey,

Are you using win10 ?

Im getting

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

on every rig, using win10 and 1080ti's.

[bakermining76]

With v14.3, I'm getting 2.5gps (GRIN31) poolside using two 1080 Tis at +180/+600/85% on F2pool with 1.2% rejected  I found in the past that both sparkpool and grinmint had too high rejected shares, so haven't bothered with them. I did have pretty good luck with Luxor on Grin29 - near 0% rejects, which makes sense because my ping is ~55ms at Luxor compared to ~330ms on F2pool. I'm planning to go back to Luxor after my next F2pool payout.

Hey,

Are you using win10 ?

Im getting

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

on every rig, using win10 and 1080ti's.

No, I'm using Linux.

[pokeytex]

Is there any guide on how to get bminer working under linux for c31?  I keep getting miner died!  GTX 1080 ti on Ubuntu 18.04.

[Rabinovitch]

I found BMiner 14.3.0 being hung on 2 PCs one with 1 and another with 3 2080Ti, Ubuntu 18.10.

[Karlitosss]

I also get a lot of issues on my 12 GPU rig under HiveOS.

Rejected shares even on Luxor and miner always restart

[UselessGuru]

BMiner.exe -api 127.0.0.1:4002 -uri beam://************************.multipoolminer:x@beam.eu.nicehash.com:3370 -watchdog=false -devices 0

Miner works fine for about 3 minutes and then this:

Code:

...
[INFO] [2019-02-11T10:22:48+01:00] Received new job 1732940736900
[INFO] [2019-02-11T10:22:48+01:00] Accepted share for job #1732940736900
[INFO] [2019-02-11T10:22:49+01:00] Received new job 1732940738578
[WARN] [2019-02-11T10:22:56+01:00] Rejected share #1732940738578 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T10:22:58+01:00] Rejected share #1732940738578 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T10:23:00+01:00] Rejected share #1732940738578 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T10:23:05+01:00] Rejected share #1732940738578 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T10:23:05+01:00] Rejected share #1732940738578 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T10:23:08+01:00] Rejected share #1732940738578 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T10:23:08+01:00] Get error: Too many rejected shares, resetting in 5 seconds

Windows x64, 1809, Nvidia drivers 418.81

[bourbonmorning]

Win7, 1080ti Asus Strix, 416.94 drivers
Only 0.87 G/s per card on c31,
but 7.12 on c29.

949mv locked,
power limit 120% (working at about 80% average),
core +220 (working at about 1923 mhz)
memory +400 at P0 (working at 5899 mhz) + Pill

[RivAngE]

With v14.3, I'm getting 2.5gps (GRIN31) poolside using two 1080 Tis at +180/+600/85% on F2pool with 1.2% rejected  I found in the past that both sparkpool and grinmint had too high rejected shares, so haven't bothered with them. I did have pretty good luck with Luxor on Grin29 - near 0% rejects, which makes sense because my ping is ~55ms at Luxor compared to ~330ms on F2pool. I'm planning to go back to Luxor after my next F2pool payout.

Hey,

Are you using win10 ?

Im getting

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

on every rig, using win10 and 1080ti's.

No, I'm using Linux.

Ubuntu or something else???

[bourbonmorning]

v14.3.0 crashing at mining BEAM on 1063 with

[INFO] [2019-02-11T13:37:06+02:00] CUDA error DRIVER: '2' in func 'bminer::equih
ash::legacy::Equihash1505SolverCuda::Initialize' line 59
[FATA] [2019-02-11T13:37:06+02:00] Fatal cuda error in GPU 0. Terminate soon...

Gminer works fine with about 11 sol per card

Win7, 1063 MSI + MSI Gaming, 416.94 drivers
824mv locked,
power limit 100%,
core +170-205 (working at about 1708-1759 mhz)
memory +500 at P0 (working at 4498 mhz)

[sandscorpion]

hi, how can I fix problem with
"Insufficient memory 9177.59 MB available on device (#0). Unable to run the solver"?
Windows 10 and 1080ti's.
Grin31.
On Gminer work ok, but very small graph/s.