bakermining76
Jr. Member
Offline
Activity: 31
Merit: 7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2019, 02:56:47 PM |
|
Mining C31 with version 15.0.0 for 20 hours on SMOS: Rig 1= 1080 x2 (0/0/150W) + 1080Ti x2 (0/0/225W) with one crash and average 4.34gps in miner. Pool hashrate 4.1gps. Rig 2= 2080Ti x1 (0/0/225W) with no crashes and average 1.91gps in miner. Pool hashrate 1.83gps.
Mining C29 with version 14.3.0 for 24+ hours on Windows 10: One rig a single 2070 (75/750/80%) with no crashes and average 6.17gps in miner. Pool hashrate 5.97gps.
My 2070 would not run C31 on SMOS due to insufficient memory.
Prior to dropping my overclocks, I had stability issues on C31. Also, Bminer can't read the device status for the 2070 on Windows. (SMOS and Gminer on Windows both read it fine, so its not an issue with the card itself).
|
|
|
|
UnclWish
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2019, 03:44:15 PM |
|
Speed is too low on BEAM on AMD cards. Not all pools supported.
|
|
|
|
Spill
Jr. Member
Offline
Activity: 94
Merit: 5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2019, 05:41:11 PM |
|
Getting this problem what is bad with my config file?
C:\bminer-v15.0.0-e143cb4>bminer -devices amd:1 -uri cuckaroo29://1LXQnVpwha7Up2LDZNdGd8rh3ba3R2dooW@grincuckaroo29.usa.nicehash.com:3371
Error i'm getting? what am i missing?^^^^
[INFO] [2019-02-19T12:33:50-05:00] Bminer: When Crypto-mining Made Fast (v15.0.0-e143cb4) [INFO] [2019-02-19T12:33:50-05:00] Watchdog has started. [INFO] [2019-02-19T12:33:50-05:00] Starting miner on 1 devices [FATA] [2019-02-19T12:33:50-05:00] Undefined but requested solver: cuckaroo29 [WARN] [2019-02-19T12:33:50-05:00] Miner died! It will be restarted soon...
|
|
|
|
george2019
Jr. Member
Offline
Activity: 83
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2019, 06:49:10 PM |
|
well i tested new gminer 1.33 build for few hours and bminer 14.0 build still has highest average 24 hour hashrate on f2pool, 31g/sec vs only 28g/sec with gminer latest build, bminer itself reports only 27.2g/sec on my rig (4X1080+1X1080Ti TDP 70% memory +500 + some core oc) while gminer has 28g/sec and about same hashrate on f2pool, maybe bminer has some extra tweaks that suits better f2pool, rejected shares is 1% for bminer and 0% for gminer, i think it's something to do higher fidelity in longer periods that bminer has, gminer has less fidelity per GPU than bminer for both 1080Ti and 1080 GPU
|
|
|
|
UnclWish
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2019, 06:49:37 PM |
|
Getting this problem what is bad with my config file?
C:\bminer-v15.0.0-e143cb4>bminer -devices amd:1 -uri cuckaroo29://1LXQnVpwha7Up2LDZNdGd8rh3ba3R2dooW@grincuckaroo29.usa.nicehash.com:3371
Error i'm getting? what am i missing?^^^^
[INFO] [2019-02-19T12:33:50-05:00] Bminer: When Crypto-mining Made Fast (v15.0.0-e143cb4) [INFO] [2019-02-19T12:33:50-05:00] Watchdog has started. [INFO] [2019-02-19T12:33:50-05:00] Starting miner on 1 devices [FATA] [2019-02-19T12:33:50-05:00] Undefined but requested solver: cuckaroo29 [WARN] [2019-02-19T12:33:50-05:00] Miner died! It will be restarted soon...
You've done all right, but miner didn't support amd cards for cuckaroo29/31 algos.
|
|
|
|
mably
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2019, 07:19:10 PM |
|
Note: if you want to mine with multiple gpu. Run miner for each gpu one by one. thats the tip ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) FYI, this doesn't solve anything. Rig keeps freezing whatever the number of bminer processes, even with one per gpu.
|
|
|
|
oliverlj
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2019, 09:48:22 PM |
|
Nicehash compatibility on cuckatoo31 have some issues in 14.3.1 Accepted shares 6209 Rejected shares 473 Accepted shares 2106 Rejected shares 201
Have the same issue on two rigs. Get mostly this: [WARN] Rejected share #0 ({"code":-1,"message":"Share above target."})
And sometimes this: [WARN] Rejected share #0 ({"code":-5,"message":"Invalid nonce; is miner not compatible with NiceHash?"})
Linux, 1080tis. EDIT: Cosmetics. EDIT2: Same issue with v15. I have the same issues.
|
|
|
|
GustDK
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2019, 10:56:36 PM |
|
give me this error: [FATA] [2019-02-19T18: 53: 57-04: 00] CudaError: Unknown error: C: \ WINDOWS \ SYSTEM32 \ apphelp.dll Bminer version 15 on rig 3x1070 Win10pro version 1809 version 14.3.1 works perfect
|
|
|
|
yuzuak
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 683
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 19, 2019, 11:53:38 PM |
|
@realbminer Thanks very much for your support of 8gb c31.
system: motherboard TB250-BTC BIOSTAR cpu: g4600 ram: 8 gb ddr4 ram corsair rigs: 7 cards gpu: 1070 and 1070 ti gigabyte psu: corsair 2x1000w gold OS: linux hiveos bminer: 15.00 grin: c31
All rigs mistakes: 1070 and 1070 ti gpus miner dies repeatedly and starts again, sometimes 10 minutes sometimes 2 hours. I've tried all overclok settings or even did zero. sometimes the average load is too high Although the hiveos power is adjusted to 120w, sometimes 200w is happening on the cards. There is imbalance in terms of power. and 10-20% in pools too rejected.
|
|
|
|
jabujax
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 20, 2019, 04:42:53 AM |
|
@realbminer Thanks very much for your support of 8gb c31.
system: motherboard TB250-BTC BIOSTAR cpu: g4600 ram: 8 gb ddr4 ram corsair rigs: 7 cards gpu: 1070 and 1070 ti gigabyte psu: corsair 2x1000w gold OS: linux hiveos bminer: 15.00 grin: c31
All rigs mistakes: 1070 and 1070 ti gpus miner dies repeatedly and starts again, sometimes 10 minutes sometimes 2 hours. I've tried all overclok settings or even did zero. sometimes the average load is too high Although the hiveos power is adjusted to 120w, sometimes 200w is happening on the cards. There is imbalance in terms of power. and 10-20% in pools too rejected.
Yes i have 1070 gpus restarting sometimes too. and power consumption is unbalanced. İ am using win 7. What is hashrate of 1070ti? I have 1070tis but in win7 there is memory error ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
Hlavson
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 20, 2019, 07:01:17 AM |
|
Guys how are you able to get 1.2G/s per GTX 1080Ti at stock speed? I am unable to go above 0.6G/s per card with stock Cards are at 50°C, so definitely not an overheating issue. Is here anybody with 6 GTX 1080Ti's on one rig running total at 7G/s? OS: Win 7 x64 Drivers: 416.34 CPU: G3930 I get 1,33 G/s per 1080ti in a 6 card rig all 1080ti, but I'm using linux... It could depends on GPU model. I get from one card 1.3 G/s and from the second only 1.1 G/s. Both on WinX system I am able to get 1.2 G/s per every card, but only for 2 or 3 cards running at one time. When i add GPU 4,5,6 speed of all cards go down to 0.6 G/s. make separate bat files for every gpu. Same problem occured for me i solved like this. I have already tried that, but after 4 instances running, CPU is at 100%. Then i am unable to run remaining two. Performance is degrading even if every card is run on separate miner. For C29 is perfect stable for weeks at 39 G/s. CPU: G3930 RAM: 4GB MB: Z170-Gaming K3
|
|
|
|
burster51
Newbie
Offline
Activity: 45
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 20, 2019, 09:08:18 AM Last edit: February 20, 2019, 05:05:50 PM by burster51 |
|
addition: this looks like a memory leak, will you be able to fix this in 15.1?
--------------
Hi realbminer,
wonderful that you cuckatoo31 work on 8GB cards. There seem to be some memory allocation issues, I get on several cards the following
*** Error in `./bminer': malloc(): memory corruption (fast): 0x00007f1da06d98c0 *** ======= Backtrace: ========= /lib/x86_64-linux-gnu/libc.so.6(+0x777e5)[0x7f1ded64b7e5] /lib/x86_64-linux-gnu/libc.so.6(+0x82651)[0x7f1ded656651] /lib/x86_64-linux-gnu/libc.so.6(__libc_malloc+0x54)[0x7f1ded658184] /usr/lib/x86_64-linux-gnu/libcuda.so.1(+0x217bdc)[0x7f1de9d85bdc] /usr/lib/x86_64-linux-gnu/libcuda.so.1(+0x113048)[0x7f1de9c81048] /usr/lib/x86_64-linux-gnu/libcuda.so.1(+0x29ba16)[0x7f1de9e09a16] /usr/lib/x86_64-linux-gnu/libcuda.so.1(+0x2bb119)[0x7f1de9e29119] /usr/lib/x86_64-linux-gnu/libcuda.so.1(+0x1e8a2d)[0x7f1de9d56a2d] /usr/lib/x86_64-linux-gnu/libcuda.so.1(+0xfa6be)[0x7f1de9c686be] /usr/lib/x86_64-linux-gnu/libcuda.so.1(+0xfd7e3)[0x7f1de9c6b7e3] /usr/lib/x86_64-linux-gnu/libcuda.so.1(cuMemcpyDtoHAsync_v2+0x72)[0x7f1de9db7fb2] ./bminer[0x7bfd1d] ./bminer[0x7cbeba] ./bminer[0x7cb82b] ./bminer[0x7b305d] ./bminer[0x7cd846] /usr/lib/x86_64-linux-gnu/libstdc++.so.6(+0xb8c80)[0x7f1dee59ec80] /lib/x86_64-linux-gnu/libpthread.so.0(+0x76ba)[0x7f1dedbbb6ba] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f1ded6db41d]
|
|
|
|
burster51
Newbie
Offline
Activity: 45
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 20, 2019, 04:16:08 PM Last edit: February 20, 2019, 05:04:40 PM by burster51 |
|
Hi realbminer,
the ct31 on 8GB cards is buggy and has high share rejection rates up to 30-40% on f2pool
It is a problem pool side on f2pool, I switched to luxor, no rejected shares.
We need to spread the hash anyways, it is impossible that f2pool has that amount of hashrate...
|
|
|
|
ZombieWorm
Jr. Member
Offline
Activity: 71
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2019, 12:18:28 AM |
|
Hi guys, love your miner - question though, I hope your supporting the new Swap (XWP) and get the miner working on it?
Thanks
|
|
|
|
borox
Newbie
Offline
Activity: 44
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2019, 12:11:33 PM |
|
I second that! Please add Cuckaroo29s
|
|
|
|
TempestEikyuu
Jr. Member
Offline
Activity: 45
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 21, 2019, 09:19:13 PM Last edit: February 21, 2019, 09:29:37 PM by TempestEikyuu |
|
Yes. Another miner has added Cuckaroo29s, so please do it. Fast!
|
|
|
|
cryptoyes
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 297
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 22, 2019, 04:35:51 AM |
|
So no fix yet for the new malloc, CopyEdges/CollectEdges, etc errors introduced in v15?
|
|
|
|
realbminer (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 22, 2019, 08:46:37 AM |
|
I second that! Please add Cuckaroo29s Will do.
|
When Crypto-mining Made Fast. @realbminer on TWTR
|
|
|
RivAngE
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 728
Merit: 169
What doesn't kill you, makes you stronger
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 22, 2019, 05:39:04 PM |
|
I returned home today and I noticed that from the usual 14 hashrate I had, it was running at 1.5 per card. I checked the pool and the speed had fallen about 2 hours after I had start the miner.
I'm using the previous version of 15.0 and 1080ti on latest Windows 10 with latest drivers. Have this happened to anyone else?
|
|
|
|
JFoxOne
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 640
Merit: 56
minerstat
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 22, 2019, 08:59:35 PM |
|
I returned home today and I noticed that from the usual 14 hashrate I had, it was running at 1.5 per card. I checked the pool and the speed had fallen about 2 hours after I had start the miner.
I'm using the previous version of 15.0 and 1080ti on latest Windows 10 with latest drivers. Have this happened to anyone else?
v15 is a bit problematic for some (judging by previous posts). Best to rollback to 14.3.1 and wait for fixes.
|
|
|
|
|